• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.95-104
• /
• 1976

This study was conducted to test the harvesting operation of two kinds of rice varieties such as Milyang #15 and Tong-il with a imported two furrow Japanese combine and was performed to find out the operational accuracy of it, the adaptability of this machine, and the feasibility of supplying this machine to rural area in Korea. The results obtained in this study are summarized as follows; 1. The harvesting test of the Milyang #15 was carried out 5 times from the optimum harvesting operation was good regardless of its maturity. The field grain loss ratio and the rate of unthreshed paddy were all about 1 percent. 2. The field grain loss of Tong-il harvested was increased from 5.13% to 10.34% along its maturity as shown in Fig 1. In considering this, it was needed that the combine mechanism should be improved mechanically for harvesting of Tong-il rice variety. 3. The rate of unthreshed paddy of Tong-il rice variety of which stem was short was average 1.6 percent, because the sample combine used in this study was developed on basisof the long stem variety in Japan, therefore some ears owing to the uneven stem of Tong-il rice could nat reach the teeth of the threshing drum. 4. The cracking rates of brown rice depending mostly upon the revolution speed of the threshing drum(240-350 rpm) in harvesting of Tong-il and Milyang #15 were all below 1 percent, and there was no significance between two varieties. 5. Since the ears of Tong-il rice variety covered with its leaves, a lots of trashes was produced, especially when threshed in raw materials, and the cleaning and the trashout mechanisms were clogged with those trashes very often, and so these two mechanisms were needed for being improved. 6. The sample combine of which track pressure was $0.19kg/cm^2$ could drive on the soft ground of which sinking was even 25cm as shown in Fig 3. But in considering the reaping height adjustment, 5cm sinking may be afford to drive the combine on the irregular sinking level ground without any readjustment of the resaping height. 7. The harvesting expenses per ha. by the sample combine of which annual coverage area is 4.7 ha. under conditions that the yearly workable days is 40, percentage of days being good for harvesting operation is 60%, field efficiency is 56%, working speed is 0.273m/sec, and daily workable hours is 8 hrs is reasonable to spread this combine to rural area in Korea, comparing to the expenses by the conventional harvesting expenses, if mechanical improvement is supplemented so as to harvest Tong-il rice. 8. In order to harvest Tong-il rice, the two furrow combine should be needed some mechanical improvements that divider can control not to touch ears of paddy, the space between the feeding chain and the thrshing drum is reduced, trash treatment apparatus must be improved, fore and rear adjust-interval is enlarged, and width of track must be enlarged so as to drive on the soft ground.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.159-167
• /
• 1997

To cope with the mass-production and supply of plug seedling, the supply of transplanters is necessary. In the study, a transplanting test was carried out to find the optimum working condition in the mechanizd transplantation and to acquire the basic data for the improvement of transplanters by the research and analysis of working capacity of the local manual transplanters. The size of hopper affected transplanting stand and rate. Re-irrigation was required for the transplanted seedlings because they wilt 1 day after the transplanting if soil compaction is incomplete. Consequently, back-forth-left-right compaction method was good for soil covering and compaction. It may be thought to increase the amount of irrigation water at the time of transplanting by double-irrigation mechanism, but it needs to increase the larger water tank which makes the operation uneasy. So, assuming the working model by 1 or 2 operators with the machine size as small as possible, it seemed that eliminating of automatic irrigation method was desirable in view of efficiency. Though semiautomatic transplanter needs some structural improvements, it seemed still suitable for transplanting of plug seedlings such as 45-day red pepper seedlings in 128-hole tray and 25-day Chinese cabbage seedling in 128-hole tray. If traveling speed of the transplanter is limited to less than 14 m/min, with the transplanting depth of 2~3cm and transplanting space of 30cm.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.435-440
• /
• 2004

연안침수지도는 태풍이나 해일에 의한 연안침수 발생 시 방조제의 월류 및 붕괴로 인한 예상 침수구역을 강우빈도(200년)별로 나타내고, 침수면적과 깊이를 표현한 지도로서 국외 선진국에서 방재형 국토관리 정책결정과 침수피해에 대한 대민 홍보의 수단으로 활용되고 있다. 국내에서도 연안침수에 의한 피해가 나날이 커지고 국토의 개발에 따른 자연 재해가 많아짐에 따라 보다 방재형 국토개발로 국민의 안전과 복리를 증진하고, 연안침수에 의한 피해를 최소화하기 위한 노력의 일환으로 연안침수지도의 제작 필요성이 증대되고 있다. 본 연구의 시범지역인 대부도 남부지역의 GIS 데이터베이스 구축은 문헌조사 및 기구축 데이터 확보, 지역의 특성에 맞는 신규 GIS 데이터베이스 구축 방법을 제시하였다. 침수구역을 예측하기 위한 모델링을 지원하기 위한 정확도와 경제성, 객관성, 현실성이 높은 지형공간자료의 효율적인 구축이 강조되었다. 구축한 데이터베이스의 세부 유형은 침수위험구역, 침수경계구역, 침수량 화살표이며, 기존에 구축된 데이터를 활용한 레이어는 해안선, 도로, 건물, 등고선, 등심선, 연안 표고점 측량데이터이다. 연안침수지도는 효율적인 재난관리를 위하여 다양하게 활용될 수 있을 것으로 사료되며 나아가 주민의 침수에 대한 경각심 고취와 사전 교육, 지방자치단체의 침수위험 관리업무의 활용이 가능할 것으로 사료된다. 본 연구에서 제작된 연안침수지도는 지자체 주민들을 위해 보기 쉽고 다양한 정보를 얻을 수 있도록 제작되었으며, 이를 위해 사진과 삽화를 추가하여 주민들에게 침수피해에 대한 경각심과 이해를 높이는데 중점을 두었다. 유지관리 후 활용체계 정비의 중요성’을 점검하고, ‘변동자료 발생원인의 분석’, ‘명확한 변동자료 입력 근거의 확보’, ‘갱신주체별 역할의 정의 및 유지관리 기준의 설정’, ‘분야별업무 특성을 고려한 관련 기준의 마련 및 타 시스템과 연계되는 항목을 고려한 절차 정의’ 등에 대한 다양한 접근을 시도하였다. 본 연구에서 제시하는 유지관리 모델을 기반으로 각 지자체별로 적절한 컨설팅이 진행되고 이에 따라 담당자의 실천이 이루어진다면 지자체 GIS의 투자대비 효과에 대한 기대는 이상이 아닌 현실로 다가오게 될 것이다.가오게 될 것이다. 동일하게 25%의 소유권을 가지고 있다. ？스굴 시추사업은 2008년까지 수행될 계획이며, 시추작업은 2005년까지 완료될 계획이다. 연구 진행과 관련하여, 공동연구의 명분을 높이고 분석의 효율성을 높이기 위해서 시료채취 및 기초자료 획득은 4개국의 연구원이 모여 공동으로 수행한 후의 결과물을 서로 공유하고, 자세한 전문분야 연구는 각 국의 대표기관이 독립적으로 수행하는 방식을 택하였다 ？스굴에 대한 제1차 시추작업은 2004년 3월 말에 실시하였다. 시추작업 결과, 약 80m의 시추 코아가 성공적으로 회수되어 현재 러시아 이르쿠츠크 지구화학연구소에 보관중이다. 이 시추코아는 2004년 8월 중순경에 4개국 연구팀원들에 의해 공동으로 기재된 후에 분할될 계획이다. 분할된 시료는 국내로 운반되어 다양한 전문분야별 연구에 이용될 것이다. 한편, 제2차 시추작업은 2004년 12월에서 2005년 2월 사이에 실시될 계획이다. 수백만년에 이르는 장기간에 걸쳐 지구환경변화 기록이 보존되어 있는

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.4
• /
• pp.3-13
• /
• 2023

The purpose of this study is to compare and analyze the performance and work productivity of wet type pavement cutters and sludge suction type pavement cutters (hereinafter referred to as automatic pavement cutters) developed to reduce scattering dust. We first investigated the development status of wet type manual pavement cutters that are mainly used in Korea and automatic pavement cutters, and analyzed the pavement cutting work in detail. And the standard cutting performance was derived by measuring the cutting time by depth by applying the two equipment to the test bed under the same conditions. However, there is a limitation that the data measured in the test bed does not reflect the various variables of the actual pavement cutting site. Therefore, in this study, data was collected through field surveys, and the correlation between cutting distance and time was analyzed, and then a model for calculating the productivity of pavement cutters was presented through simple regression analysis. As a result of comparative analysis of the values derived from the regression equation with the standard cutting performance derived from the test bed, the cutting performance derived through the regression equation showed a similar trend to the standard cutting performance. Finally, we verified the usability of the automated pavement cutter developed by qualitatively analyzing three tasks that are difficult to measure quantitatively but affect productivity.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.33-43
• /
• 2011

Recently, 3D displays are supplied in the 3D markets so that the demand for 3D stereoscopic contents increases. In general, a simple method is to use a stereoscopic camera. As well, the production of 3D from 2D materials is regarded as an important technology. Such conversion works have gained much interest in the field of 3D converting. However, the stereoscopic image generation from a single 2D image is limited to simple 2D to 3D conversion so that the better realistic perception is difficult to deliver to the users. This paper presents a new stereoscopic content production method where foreground objects undergo alive action events. Further stereoscopic animation is viewed on 3D displays. Given a 2D image, the production is composed of background image generation, foreground object extraction, object/background depth maps and stereoscopic image generation The alive objects are made using the geometric transformation (e.g., translation, rotation, scaling, etc). The proposed method is performed on a Korean traditional painting, Danopungjung as well as Pixar's Up. The animated video showed that through the utilization of simple object transformations, more realistic perception can be delivered to the viewers.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.662-669
• /
• 2018

Recently, the installation of submarine power cables is under consideration due to the increase of electric power usage and the development of the offshore wind farm in island areas, including Jeju. In order to protect power cables installed on the seabed, it is necessary to calculate the burial depth based on the characteristics of anchoring, dragging and fishing, etc. However, there is no design standard related to the size of target ships to protect the cables in Korea. In this study, we analyzed the design standards for the protection of domestic submarine pipelines similar to submarine cables, and developed the risk matrix based on the classification by emergency anchoring considering the installation environment, then designed the size of target ships according to the cumulative function scale by ship size sailing through the sea concerned. Also, we linked marine accident conditions, such as anchoring, dragging, etc. and the environmental conditions such as current, sea-area depth of installation etc. to the criteria of the protection of submarine cable, and examined the size of specific target ships by dividing the operating environment of ships into harbor, coastal and short sea. To confirm the adequacy and availability of the size of target ships, we verified this result by applying to No. 3 submarine power cables, which is to be installed in the section from Wando to Jeju Island. This result is expected to influence in the development of a protection system for submarine cables and pipelines as well as the selection of anchor weight according to the determination of burial depth.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.10
• /
• pp.520-529
• /
• 2005

A feature-based 3D modeling algorithm is presented in this paper. Since conventional methods use depth-based techniques, they need much time for the image matching to extract depth information. Even feature-based methods have less computation load than that of depth-based ones, the calculation of modeling error about whole pixels within a triangle is needed in feature-based algorithms. It also increase the computation time. Therefore, the proposed algorithm consists of three phases, which are an initial 3D model generation, model evaluation, and model refinement phases, in order to acquire an efficient 3D model. Intensity gradients and incremental Delaunay triangulation are used in the Initial model generation. In this phase, a morphological edge operator is adopted for a fast edge filtering, and the incremental Delaunay triangulation is modified to decrease the computation time by avoiding the calculation errors of whole pixels and selecting a vertex at the near of the centroid within the previous triangle. After the model generation, sparse vertices are matched, then the faces are evaluated with the size, approximation error, and disparity fluctuation of the face in evaluation stage. Thereafter, the faces which have a large error are selectively refined into smaller faces. Experimental results showed that the proposed algorithm could acquire an adaptive model with less modeling errors for both smooth and abrupt areas and could remarkably reduce the model acquisition time.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.455-463
• /
• 2018

This study developed a method to quantitatively measure the size of cracks in concrete using X-ray CT images. We prepared samples with a diameter of 50 mm and a length of 100 mm by coring cracked concrete block that was obtained by chipping. We used a micro-focus X-ray CT, then applied the 3DMA method (3 Dimensional Medial axis Analysis) to the 3D CT images to find effective parameters for damage assessment. Finally, we quantitatively assessed the damage based on sample locations, using the damage assessment parameter. Results clearly show that the area near the chipping surface was damaged to a depth of 3 cm. Furthermore, X-ray methods can be used to evaluate the porosity index, burn number, and medial axis, which are used to estimate the damage to the area near the chipping surface.

• Nuclear Engineering and Technology
• /
• v.6 no.4
• /
• pp.239-247
• /
• 1974

A human phantom of polyethylene has been designed and sculptured for studying the effective radiation safety control. The phantom has the approximate size of the Korean adult and was sliced into thirty-five transverse slabs, 2.5 cm thick, The relative dose at the specified position was determined from the exposure that a TLD badge worn on the surface of the phantom body received from external ${\gamma}$-ray. The variation of the exposure as a function of depth in the phantom was measured for uncollimated ${\gamma}$-ray using TLD rods, and also isodose curves were obtained for the anatomical cross-section of the critical organs of the body. To simulate radiation exposure condition in the nuclear facility, measurements were made for given angles of incident ${\gamma}$-ray. The front to back attenuation factor for human phantom of thickness 20 cm was 0.439 for Cs$^{137}$ ${\gamma}$-ray which is in reasonable agreement with the published data.