• Journal of Korean Society of Steel Construction
• /
• v.14 no.5 s.60
• /
• pp.647-656
• /
• 2002

High-strength steel in steel bridges is the key to achieving cost-efficiency because it facilitates lightweight construction and rationalizes structure. The future of high-strength steel is bright, with its use projected to expand. As such, it is necessary to evaluate precisely various factors affecting the process of fabricating high-strength steel, i.e., welding heat, strain hardening, and weldability and performance of the welded joints. This study therefore performed the maximum hardness test and y-groove weld crack test using welding processes such as SAW, FCAW, and GMAW, in order to investigate the welding performance and characteristics of welded Joints or high-strength steel produced in Korea such as SM570, POSTEN60, and POSTEN80. In addition, a series of welding tests was carried out to estimate the tensile strength, bending characteristics, absorbed energy, and hardness in welded joints.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.120-129
• /
• 2011

An installation of the construction lift has a few limitations by many constrains and these have influences on labor productivity, that can be changed by vertical-transportation management. In the super-tall building construction, a management of construction lift operation is one of the most important factor, but existing methodologies depend on skilled practitioners' experiences. And it is true that the expertise resulted by the experiences does not transfer to the next generation. This study is a part of lifting-management simulation development which aims at the optimal construction lift management. A proposed algorithm is focus on lifting time calculation considering an acceleration capability. This research evaluates the result accuracy using comparative analysis on simulation result and field measuring time.

• Journal of Korean Society of Forest Science
• /
• v.52 no.1
• /
• pp.37-49
• /
• 1981

The purpose of the study is to find out the objective method of valuation on the forest stands through the analysis of logging costs that is positively related to timber production. The two forest (Amgog, Whangryoung), located nereby, but forest type, logging and skidding conditions being slightly different, were slected to carry out the study. The objective timber stumpage value were determined by investigating the appropriate timber production costs and profits of logging operations. The main result obtained in this study are as follows: 1. The rate of logging cost in consisting of timber market price is 13.15% in the area of Amgog logging place and 19.48% in Whangryoung. 2. The rate of the other production cost excluding logging cost is 15.36% in the area of Amgog logging place and 28.85% in Whangryoung. 3. The total rate of timber production cost in consisting of the market price is more than 28.51% in the area of Amgog logging place and 48.33% in Whangryoung, 4. Though the productivity of forest land is affected by the selection of tree species, tending, treatments and effective management of forest land, the more important problem is improvement of logging condition. 5. The rate of production cost in timber price is so high that we should endeavore to improve the productivity of labour and its quality, and minimize the difference of piece work per day in accordance to the various site condition. 6. Although the profit of forest industry is related to the period of recapturing investment, it is more closely related to the working condition, risk of investment and continuous change of social investment interest. 7. If the right variables which are related to the timber market, are objectively obtained, the stumpage value of mature forests can be objectively caculated by applying straight line discounting method or compound discounting method in caculating the stump to market price.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.46-55
• /
• 1993

조종사가 수행하는 조종 업무는 여러 정보를 동시에 지각하여 처리하여 야 하는 복잡한 작업으로 구성되어 있어, 조종사에게는 고도의 인간성능이 요구되고 있다. 또한 조종기술을 습득하기 위해서는 많은 훈련시간과 비용 이 소요되며, 조종사의 실수는 치명적인 사고를 초래한다. 따라서 조기에 비행 부적격자를 판별하고, 미흡한 조종 적성을 함양시킬 수 있는 교육 . 훈련 프로그램을 조종 후보생에게 적용시키는 분석적 조종적성 진단 체계 개발은 조 종사의 도태율 감소, 효율적인 비행훈련, 비행 안전사고 감소 등의 측면에서 절실하게 요구되고 있다. 본 연구에서는 조종 업무 수행시 요구되는 여러 인간 기능의 중요도 차이를 조종 적성 평가 체제에 적용하기 위해서, 각 적성 검사 항목들의 상대적 중요도를 분석하고 이의 타당성을 평가하였다. 적성검사 항목의 상대적 중요도 분석은 조종적성검사 계층구조의 각 수준별 쌍체 비교 평가와 AHP(Analytic Hierarchy Process) 분석에 의한 상대적 중요도 산출 및 평가, 그리고 일관성 지수(Consistency Index)에 의한 분석 결과의 조정을 통해 이루어 졌다. 적성검사 항목의 쌍체 비교 평가는 심리기능검사, 비행자질 검사 등 총 29개 적성검사 항목에 대해 검사를 받았고 또한 초등비행 훈련과정을 수료한 조종 학생들에 의해 이루어 졌다. 상대적 중요도를 분석한 결과 심리기능 검사(W=0.30)가 다른 검사에 비하여 조종적성 평가에 중요한 검사로 나타났으며, 세부 항목으로는 주의 분배력(W=0.13), 추적능력(0.06) 등이 상대적으로 중요한 검사 항목으로 나타났다. 또한 상대적 중요도 결과를 적용한 적성검사 성적이 적용하지 않은 적성검사 성적에 비해 비행성적에 대한 예측 능력이 좋은 것으로 평가되었다.al age)가 있다는 것을 의미하는 것이다. 한편, 생산현장에서는 자동화, 기계화가 진보되어 육체적인 노동이 경감된 결과, 중고령자라도 할 수 있는 작업이 많아지고 있다. 또, VDT (Visual Dislay Terminal) 작업과 같은 정보처리 작업의 수요가 증가하여 그 인재의 부족이 지적되고 있다. 따라서 중고령자의 기능을 조사하여 어떠한 작업에 적합한가를 판단하는 것이 중요한 과제로 되었다. 그러나 노동에는 많은 기능이 관여 하고, 그 내용에 따라서 요구되는 기능이 서로 다르기 때문에 노동적응능력의 기본적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3579-3586
• /
• 2015

In this study, EEG, HRV, and Vibra image were compared and analyzed in the environmental test room due to stimulation of aroma and color temperature. The condition of the environmental test room was in temperature $25[^{\circ}C]$, relative humidity 50[RH%], air current speed 0.02[m/s] and illuminance 1000[lux] with setting up different sensory stimulation condition which are before exposure, single-sensory stimulation of Jasmine scent, single-sensory stimulation of RED color lighting, and multi-sensory stimulation of Jasmine scent and RED color lighting. The result of this study, at multi-sensory stimulation of Jasmine scent and RED color lighting, relative $S{\alpha}$ wave, SEF50, $SMR/{\theta}$ and SDNN were revitalized, and both sides ${\alpha}$ wave asymmetry index, stress index, fatigue degree, and HRT were decreased. Also, Viba image of tension/anxiety and stress were declined. Therefore multi-sensory stimulation of Jasmine scent and RED color lighting effects to increase the Neuro-energy like amenity, productivity of work efficiency, and concentration.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.583-592
• /
• 2014

This study was carried out to investigate the operational time and productivity of logging operation by chain saw, yarder attached on tractor, tower-yarder, mini-truck, mini-forwarder, and chipping operations by mini-chipper, large-chipper in order to develop the efficient logging operation system for utilization of forest-biomass. As a result, the average felling and bucking time using chain saw at the site 1 and 2 was observed to be 182.7 sec/cycle and 518.5 sec/cycle respectively. The average yarding time was 202.5 sec/cycle using yarder attached on tractor and 295.1 sec/cycle using tower-yarder. The average forwarding time was 2,073 sec/cycle using mini-truck and 2,248.4 sec/cycle using mini-forwarder. The operational time of felling and bucking using chain-saw can be delayed according to the direction of fallen trees. The selection of felling direction is very important to yarding operation because the direction between width-yarding and felling are interrelated. Productivity can be improved through educating and training operators in the yarding operations. Mini-forwarder is needed to use because of higher productivity and lower cost than mini-truck. The operational productivity of felling and bucking by chain saw was $66.96m^3/man{\cdot}day$ and $43.86m^3/man{\cdot}day$ at site 1 and 2 respectively. The yarding productivity was $5.68m^3/man{\cdot}day$ by yarder attached on tractor, $10.74m^3/man{\cdot}day$ by tower-yarder. The forwarding productivity was $21.29m^3/man{\cdot}day$ by mini-truck, $28.57m^3/man{\cdot}day$ by mini-forwarder. The chipping productivity was $4.42m^3/man{\cdot}day$ by mini-chipper, $21.87m^3/man{\cdot}day$ by large-chipper.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.690-695
• /
• 2006

This study was carried out to develop a system for forest resources inventory using PDA. The Forest Inventory Software running on PDA was developed based on a Forest Resources Inventory Method by Korea Forestry Service and 4th National Forest Inventory Method. The forest inventory data stored in PDA contains sea level and GPS positioning data. Forest inventory input items are 34 tree species, 18 diameter class by each tree species, number of trees, tree height per each diameter class, thickness of bark, and annual growth of tree. Application test of the software with the forest workers shorted that, hours of forest works were remarkably reduced. It is possible to do forest inventory effectively using Forest Inventory Software developed by this study. Therefore, investigation and management expenses can be reduced and labor productivity will be improved.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.83-88
• /
• 2016

The use of consistent coastlines is an important element for the systematic management of maritime boundaries and the interests of local governments. The Hydrographic and Oceanographic Agency conducted a preliminary survey for consistent coastline production, since 2001. As a result, the length of coastline was different by year. Because of the lack of systematic management, the use of incorrect data, etc. We also changed the coastline on the sea chart to show on a digital map for realization of terrain expression method. However, there was a variation in shoreline length due to various surveying techniques and shoreline extraction methods. In this paper, the characteristics of Jeju-do coastline were analysed by using a modified divider method of fractal dimension. The accuracy of the vectorization was determined by converting the actual distance in the Public Survey Amendment for proper divider use. With 1:5,000 and 1:25,000 digital maps of Jeju-si and Seogwipo-si each fractal dimensions were calculated. Jeju-si=1.14 and Seogwipo-si=1.12 in 1: 5,000. Jeju-si=1.13 and Seogwipo-si=1.10 in 1: 25,000. Calculated fractal dimension were correlated to data from digital maps. It was considered that complexity and scale of coastlines affected. In the future coastline length statistics and minimum ratio of calculated coastline length to original length need to be determined for consistency of coastline length statistics.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.292-299
• /
• 2018

In a survey in which farmers were asked about their levels of satisfaction with agricultural machines, Japanese products scored higher than local products by 1.2, 1.3, and 1.4 times for tractors, combine harvesters, and rice transplanter, respectively. Japanese products corresponded to generally high satisfaction levels in terms of operating performance, operability, frequency of breakdowns, and durability, excluding sales price and after-sales services. Effective countermeasures through quality improvement are therefore necessary for Korean products. Furthermore, a survey of dealers showed that the components and consumables for core agricultural machines had high frequencies of breakdowns and repairs. Four major components of tractors represented 85.3% of all breakdowns and repairs, five components of combine harvesters represented 89.6%, and three components of rice transplanters represented 80.5%. Moreover, a comparison of the technological levels between local and imported machines showed that the local machines' levels were at 60-100% for tractors, 70-100% for combine harvesters, and 70-95% for rice transplanters. Small and mid-sized tractors, 4 interrow combine harvesters, and 6 interrow rice transplanters showed similar levels of technology. The results of the analysis suggest that action is urgently needed at a policy level to establish an agricultural machinery component research center for the development, production, and supply of commonly-used components, with the participation of manufacturers of agricultural machines and components, in order to enhance the competitiveness of local manufacturers and to revitalize the agricultural machine market.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.100-105
• /
• 2016

The use of 3D scanners has increased gradually according to increasing 3D printer applications. The precision inspection of car parts or electronic components is an important issue not only in the field of mass production, but also in small-scale production. Recently, 3D scanner equipment efficiency and recognition technology has been improved continuously. On the other hand, the spraying time to prepare 3D scanning is time-consuming and has environmental problems. Therefore, an automatic spray system has been in demand by the manufacturing industry. Automatic spray equipment was newly developed for the preparation of a 3D scanner. In this research, the automatic spray system guarantees uniform spray operation. To determine the optimal spray parameters, various spraying methods, solutions and conditions were tested and compared with the experiments. The preparation time for 3D scanning was reduced to 1/10 compared to the manual spraying time, and indicates the optimal spraying conditions through a comparison of various spray coating conditions.