• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.574-581
• /
• 2019

The present study analyzed the productivity and cost of winching operations for evaluating the efficiency of a tractor-attached winch in a Pinus densiflora thinning site located in the Yangyang County of Gangwon-do. The mean yarding distance and mean timber volume were 29 m and 0.15 ㎥, respectively. In the 95 cycles of yarding operations, the uphill and downhill yarding operations constituted 51% and 49%, respectively, of the total yarding operations. The productivity of the uphill yarding operation was 2.28 ㎥/h, and the productivity of the downhill yarding operation was 1.89 ㎥/h. The findings of this study revealedthat productivity would increase by 0.5 ㎥/h when the rate of utilization of the machine is increased to 80% by reducing the operational delay time. The cost of the downhill yarding operation was 44,116 KRW/㎥, whereas that of the uphill yarding operation was 53,369 KRW/㎥. The difference in cost resulted from the difference in the number of yarding stems (stems/cycle). Furthermore, the results of the multiple linear regression equation developed for predicting the yarding operation times showed that productivity was significantly affected by working conditions such as yarding distance (m), the number of stems per cycle (stems/cycle), and the terrain slope (%) in the uphill and downhill yarding operations. Further research is required for developing an accurate prediction model equation according to a yarding direction.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.144-144
• /
• 2017

쌈 채소 생산 및 유통의 효율성, 생산성 개선으로 경쟁력 향상을 위해 IoT 기반 스마트 저울과 쌈 채소전용 포장용 가이드를 개발 융합하여 안전하고 빠른 포장, 이동성 개선, 포장과 무게측정 동시 진행 및 출하량 자동측정으로 작업공정개선을 통해 최종적으로 생산성을 향상시킬 수 있는 제품을 개발하고자 한다. 1) 쌈 채소 포장용 가이드를 포함한 실시간 포장 무게 측정 장치 개발 ${\circ}$ 포장 박스와 관계없이 용이하게 사용할 수 있는 쌈 채소 포장용 가이드 개발 ${\circ}$ 실시간 포장 무게를 측정하여 출하 무게에 도달하였을 때 생산담당자에게 부저를 통해 신호전달 2) 생산패턴 분석을 통한 생산관리 애플리케이션 개발 ${\circ}$ 생산 패턴을 파악하여 실시간 생산량을 BLE 통신을 통해 관리자 스마트 폰으로 통지 ${\circ}$ 포장용 지그, 스마트 스케일, 이동체 1식으로 구성하여 용이하게 하우스 이동 3) 센서 디바이스 개발 ${\circ}$ 각종 센서(온도, 습도, 조도 등)의 디바이스를 활용하여 주위환경 데이터 수집 ${\circ}$ 스마트 폰 등을 활용한 콘텐츠 개발 및 노동복지 환경조성(작업환경 개선)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.165-166
• /
• 2010

In this study, it was accomplished to analyze the productivity and manpower through the activity of rebar work for the application of rational construction cost in apartment house. And the rebar work is very important in the view of the expense and safety, and durability in the construction of R/C structure. Also the rebar work is very affected with productivity owing to the lack of manpower and materials cost rise.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.90-91
• /
• 2013

In the field of nuclear power construction, management and the systematic construction is very necessary. For more efficiently managing, analysis of influence factors and productivity is indispensable now. On this research, we collected the data from the nuclear power plant which is located in Korea. We analyzed the productivity and influence factors. As a result, productivity was 0.75(㎡/man·hour).On one hand, the productivity should be personnel, weather and whether there is a night duty or not. On the other hand, work crew depends upon operators, formwork amount, the presence or absence of night duty.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.121-128
• /
• 2010

This study aims to make improvements to the standard estimation process used to estimate reasonable costs for construction work, and to suggest a work crew based estimation using a new cost estimation model. In addition, work crew shift combination and construction process were systematically organized in order to improve the estimation technique and the construction capability of the cement liquid waterproofing work for apartment buildings. In addition, in terms of manpower and productivity, analyses were performed on the cement liquid waterproofing work for apartment buildings with net areas between $84-85m^2$ and $125-184m^2$, and the results were then compared with those calculated using the conventional work-crew based estimation method. Through this study, when the results of this study and those calculated by the conventional method were compared, for apartments with the net area of $84-85m^2$, the differences between specialists were shown to be 1.91 times to 2.13 times on average, while they were 8.82 times to 9.52 times between normal workers on average. For apartments with the net area of $125-184m^2$, the differences betweenspecialists were shownto be 1.89 times to 2.07 times on average, and 8.57 times to 9.38 times on average between normal workers.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.53-66
• /
• 2012

Gangform compared with conventional wood and steel form is systemized form which has a capability to install and dismantle form at a time without repeating to assembly and disassembly small members. Gangform compared with ACS has some problems such as 1) Tower Crane load increase, 2) increase in safety incidence during climbing Gangform, 3) decrease in detachment operation productivity, 4) stop work due to climate impacts, and 5) decrease in labor cost, productivity, quality. A conceptual design model of automated Gangform climbing system is suggested for apartment housing construction to show its technical/economic feasibility and workers' safety while increasing operation productivity and concrete quality.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.377-382
• /
• 2005

This paper deals with productivity improvement of stevedoring system by pooling opertaions of transport vehicle at automated container terminal. Usually, in traditional container terminals, grouping operations of transport vehicle are applied for container crane because vehicle routing path is simple and vehicle assignment is easy. But this static assignment(SA) operation that arrsign vehicles to container crane ar apron reduces flexibility of vehicles. Therefore, This paper presented 4 dynamic assignment(DA) method to improve efficiency of vehicles. These 4 dynamic assignment method consider present situations of container crane such as sequence(Se), queue time(Qt), productivity(Pr), numeric of vehicle assignment(Nv), numeric of buffer(Nb) at vehicles assignment. At the results, dynamic assignment operation to consider Qt, Nv, Nb is most efficient and by next time, dynamic assignment operation to consider Se is superior more than static assignment operation. but, dynamic assignment operation to consider Pr or Qt of container crane only is inefficient than static assignment operation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.449-456
• /
• 2022

Recently, fruit farms such as apples tend to have higher productivity and reduce pesticide spraying, and demand in Southeast Asia continues to increase as technology for high-grade work vehicles in the Philippines and Korea's agricultural high-grade work vehicles rise to 3,300mm to 3,800mm, so workers can work at only 4.5m. Therefore, this paper is a study to develop a multi-purpose upright smart high-altitude work vehicle that can secure a work space of more than 7m, up 5.5m, and a structural analysis for design and verification of Multi-purpose Smart Elevation Work Vehicle

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.33-40
• /
• 2010

Recently, the scale of construction work has been growing, and buildings are becoming higher. To enable greater efficiency of construction work, the use of vertical transportation equipment has been radically increasing. In this context, many studies have been conducted on tower cranes. While these studies have discussed issues such as the selection of tower cranes, the optimization of locations, and the hoisting time of tower cranes, there has been no research on the installation of tower cranes. As such, the installation of tower cranes on construction sites has been accomplished based on subjective judgment and technical assistance, and the experience of workers in equipment companies. Therefore, this study analyzes the productivity of tower cranes using simulation methodology, and proposes a generalized model of the installation process of tower cranes in order to offer a basic resource that site managers can directly utilize.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.76-85
• /
• 2003

최근 업종 전문화와 분업화에 의해 협력업체의 존재 없이는 모기업의 존속이 어려운 공동운명체의 관계에 있으므로 협력업체를 모기업의 생산라인 일환으로 생각하고 체계적인 안전활동을 실천하여 산재사고를 미연에 예방하고자 모기업은 협력업체의 위험요인(Danger), 유해환경(Dirtiness), 힘든 작업(Difficulty)에 대한 근원적인 안전성 확보를 위해 총괄적인 안전관리 System을 체계적으로 추진할 필요성이 대두되었습니다.(중략)