• Spatial Information Research
• /
• v.4 no.1
• /
• pp.83-92
• /
• 1996

The inventory maps of landslide deposits show where landsliding has occured in the past., and serve as a general guide to slope stability. Isopleth maps derived from those inventory maps, provide an economi¬cal means for the recognition of landslide activity and assessing the degree of landslide hazard in a large area, es¬pecially rural areas. GIS could generalize the methods of hazard assessment by means of isopleth mapping of landslide deposits. Isopleth maps of Secheon and Boreong areas, where the degree of landslide hazard is very high, show the mitigation of landslide activities remarkably by the remedial efforts during the period of 1978-1991.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 1997.10a
• /
• pp.39-52
• /
• 1997

본 연구는 언어 교육용 프로그램을 개발하는 저작도구9authoring tool)와 학생들이 자율적으로 학습할 수 있는 지능형 컴퓨터 교사시스템(ITS : Intelligent Tutoring System)으 로 구성된 지능형 학습환경(Intelligent Learning Environment)을 설계한다. 특히, 범용시스 템에서 제공되는 불필요한 기능들을 제거하고 언어교육에 필요한 기능만을 가진 간편한 저 작도구의 설계와, 인공지능 기법을 이요하여 학생 개개인의 지식수준에 따라 차별화하여 지 능적으로 교육할 수 있는 지능형 교사시스템의 구성 방법을 제안한다.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.733-735
• /
• 1999

전압원을 포함한 대형회로망의 컴퓨터적 해법을 위한 도형적 접근 방법을 제시하였다. 기본적인 회로망 해석법으로 마디해석법을 사용하였고, 전압원은 등가변환이 어려운 직렬 임피던스가 없는 경우로 한정하였다. 방향성 그래프의 기하학적 작도와 전압원이 연결된 마디와 마디 사이의 상관 관계식에 의해 회로망 행렬을 구성하였다.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.797-806
• /
• 2008

The geometric properties of the drainage structures are analyzed through depicting the drainage network which is composed of the whole drainage paths in the natural basin defined at the specific scale. The theoretical consideration is performed on the general structures of networks organized by ramification process based on Fractal tree and Horton's law. The drainage network is generated via ArcGIS, ordered by Strahler's ordering scheme and investigated with Strahler's order. As a results of the Richardson's method it is shown that there may exist the distinct behavioral characteristics between overland-flow and channel flow and the natural stream networks would be space-filling Fractals. As a result, it is shown that the values estimated by considering the overland-flow on being applied to the field data give the different results from the empirical method applied until now. As expected, therefore the results obtained from this study are sure to be devoted further researches on the channel networks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.45-57
• /
• 1993

In case of the analysis of continuous beams, the complexity increases greatly as the number of spans becomes large, and even the slope-deflection method or the moment distribution method is subject to restriction in its utilization. In this study, a revised exact method is developed for the analysis of continuous beams up to four spans, and a new approximate method is proposed for the multi-span continuous beams. This approximate procedure is very simple in its application and provides very satisfactory results which converge closely on the exact ones. These methods can also be used conveniently especially for drawing influence lines for the support moments of continuous beams, and their value is fully appreciated because of notable simpleness as compared with the conventional method which is mainly based on the Muller-Breslau principle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.3
• /
• pp.177-184
• /
• 1994

The three dimensional measuring method with minimizing operational errors for the arbitrary shaped-internal cavity based on the information of the X-ray nondestructive test is presented. Two experimental tests using artificial cavities were considered in order to verify the availity of PEVACA. In these test, X-ray NDT was conducted for detecting cavities, and the comparion between the calculating values from PEVACA and the real values from measuring the cavities was performed. As a result of this study, three dimensional cavities information using PEVACA are in good agreement with the real measured values within ${\pm}0.5mm$. The computer code, "PEVACA", contributes not only to improvement of data accuracy but also to saving of the work time and data documentation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.948-952
• /
• 2009

면적평균강우량을 정확하게 추정하는 것은 수문조사 결과로 생성된 수위-유량관계곡선 검증을 위한 연간 유출율 및 유황분석 시에 매우 중요하다. 면적평균강우량을 산정하는 방법은 일반적으로 산술평균법, 티센법, 등우선법 등이 있는데, 최근 실무에서는 GIS Tool을 이용하여 티센다각형을 작도하고 가중치를 산정하여 관측소별 강우량을 유효강우량으로 변환하여 이용하거나, 평지 또는 좁은 유역의 경우 산술평균법을 적용하고 있다. 그러나 티센법은 지형적인 영향을 고려할 수없고, 산술평균법의 경우 우량계 밀도와 위치, 지형이 고려되지 못한다는 단점이 있기 때문에, 등우선법을 이용하여 면적평균강우량을 산정하는 것이 대부분 산악지역으로 이루어진 국내 현실에 가장 적합하다. 본 연구에서는 수문조사가 이루어지고 있는 낙동강 본류, 댐상류 등 13개 유역의 유역별 면적 평균강우량을 각각 산술평균법, 티센법, 등우선법을 이용하여 산정하였다. 등우선도의 작성을 위하여 관측소별 강우량을 역거리가중법(IDW), RBF, Kriging 기법을 이용하여 강우량의 공간보간을 실시하였으며, 등우선 간격의 영향을 검증하기 위하여 각 보간법 별 등우선 간격을 10mm, 50mm, 100mm로 분할하여 면적평균강우량을 산정하였다. 각 면적평균강우량 산정기법 및 등우선 간격별로 산정된 면적평균강우량을 비교하였고, 유역면적 등에 따른 면적평균강우량의 변화특성을 분석 하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2047-2048
• /
• 2006

본 논문에서는 MPEG-4 AAC 표준에 근거하여 개인휴대단말과 같은 모바일 단말의 응용을 위해 연산 복작도를 낮춘 새로운 양자화기 구조를 제안하였다. 기존 MPEG-4 AAC 인코더의 양자화기는 rate control과 distortion control을 동시에 수행하는 순환 이중루프 구조를 갖으며, 높은 연산부담으로 인해 실시간 인코딩 및 시스템의 소비전력을 증가시키는 중요한 요인으로 작용한다. 본 논문에서는 이러한 제약조건을 극복하기 위해 허용 잡음 레벨과 대역별 양자화 잡음을 정합하는 잡음 포락선 정합기법을 제안하였고, 이를 응용하여 낮은 소비전력 실현이 가능한 단일루프 구조의 단순화된 양자화기 구조를 제안하였다. 또한 제안한 양자화기를 적용한 독자적인 구조의 MPEG-4 AAC 인코더를 구현하여 검증 및 성능평가를 수행하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1686-1696
• /
• 2022

The impedance matching circuit design technique based on the phasor plot introduced in this paper is based on the impedance triangle of electric circuit. It is a technique that designs through the construction of a phasor figure using the values given to the matching circuit design. The design pattern is based on L-type, inverted L-type, T-type, and 𝜋-type, and unknown reactance elements are determined through phasor shapes. In this paper, using a design by phasor plot, we design several cases, such as the case where the input and output ports are pure resistance and have reactance. It was confirmed that the design value was verified by serial-parallel equivalent conversion to achieve matching. This design technique can immediately grasp the phase or size of input/output power, so it is expected to be applied mainly in a low frequency band due to rapid design change and application.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2006

Time series of waterline changes during a flood/ebb cycle can be utilized for supplementary data for measuring bottom topography. The waterlines extracted from consecutive images are substituted for depth contours using water level data. The distances between contours are quantified through a rectification image process. This technique is applied to the Keunpoolan beach in the Daeijak Island near Incheon. A camera monitoring technique supported by natural water level changes produces bottom topography with high precision. It is also less time consuming and more economical. The technique also can be utilized effectively to the physical modeling f3r measuring bottom changes in the three dimensional basin.