• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.89-93
• /
• 1991

A new kind of a non-contact torque sensor which uses the difference of the maximum magnetic inductions as measurand was constructed. The torque sensor utilizes the tensile and compressive stress of two cores which are attached on the rotating shaft. This sensor shows that the linearity was better than 1 %, and the transient torque can be measured at the sampling rate of 10 kHz which is the same as magnetizing frequency of the core.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.613-620
• /
• 2016

In order to scrutinize the fluid conductivity effects on the electromagnetic flowmeter(EMF) characteristics, a small scale EMF was designed and fabricated. The measuring tube has a $3mm{\times}4mm$ rectangular cross-section, 9 mm length, and a $2mm{\times}3mm$ plate electrode and a ${\Phi}1.5mm$ point electrode. The design parameters, such as the magnetizing frequency and the number of coil turns, and the diameter were optimized. The EMF was tested with a gravimetric calibrator and showed good linearity in the range of 0 to $1.17{\times}10^{-5}m^3/s$. The fluid conductivity was varied between 3 and $11{\mu}S/cm$, and the magnitude of the flow signal was proportional to the fluid conductivity and the wetted area of the electrode. The design information and the test results provide flow measurement techniques for very low flowrate.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.49-52
• /
• 2000

The changes of magnetic properties in neutron irradiated F $e_{81}$ $B_{13.5}$S $i_{3.5}$ $C_2$ amorphous ribbon were studied by X-ray diffraction, hysteresis loop, temperature dependence of magnetization and complex permeability. The fluences of thermal ( $n_{th}$) and fast ( $n_{f}$) neutron were 6.95$\times$10$^{18}$ $n_{th}$ c $m^{-2}$ and 4.56$\times$10$^{16}$ $n_{f}$c $m^{-2}$ , respectively. The changes of XRD Profiles were not observable at the neutron irradiated sample. The complex permeability spectra showed that the permeability from domain wall motion decreased due to the increase of pinning force against domain motion by the neutron irradiation, and the relaxation frequency of rotational magnetization moved to higher frequency region. The measurement of hysteresis loop showed the increase of magnetic softness, related to rotational magnetization, but saturation magnetization was decreased in neutron irradiation sample. The Curie temperature was decreased in the neutron irradiated sample.e.e.e.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.843-844
• /
• 2006

자기 기록 시스템이 더 높은 기록 밀도를 가지려면 기록 미디어에 더 작은 공간을 가지는 비트를 기록할 수 있어야 한다. 이를 가능하게 하기 위해서는 더 작은 비트를 보존 할 수 있는 고 보자력 기록 미디어와 이를 기록할 수 있는 자기 기록 헤드가 있어야 한다. 자기 기록 시스템에서 기록 밀도와 함께 중요시 되는 것이 바로 기록 속도이다. 시스템이 발전 할 수록 요구되는 속도 또한 높아지고 있다. 기록 속도가 빨라지려면 기록 주파수가 높아지고 기록 미디어의 회전 속도가 빨라져야 한다. 자기 기록 헤드는 자화되어 있는 고 보자력 기록 미디어 위를 빠른 속도로 직선 운동하고 있는 형태가 되고 이로 인하여 자기 기록 헤드에 와전류가 발생하게 된다. 발생되는 와전류의 형태는 기록 미디어에 자화된 형태에 따라 달라질 것이고 또한 자기 기록 미디어의 회전 속도와 와전류가 발생되는 기록 헤드의 전기전도도에 따라 변화 된다. 본 연구는 이렇게 발생된 와전류를 3차원 유한요소법을 이용하여 분석한 수 이 와전류가 기록 필드에 미치는 영향을 분석하여 제시 하였다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.19-20
• /
• 2015

본 논문은 동작 주파수에 따른 임피던스 분석을 통해 무선 전력 전송 컨버터의 최적 설계 방법을 제안한다. 기존의 무선 전력 전송에는 크게 4가지의 토폴로지가 있는데 본 논문은 SS 토폴로지에 대한 최적 설계 방법을 제시한다. 무선 전력 전송이 가지는 근본적인 특징인 코일 간의 낮은 커플링 계수로 인해 컨버터 설계 시 많은 제약 사항들을 고려해야 한다. 일반적인 변압기와 달리 코일 간의 커플링 계수가 0.2 안팎이므로 충분한 자화 인덕턴스를 가지기 위해서는 코일의 턴 수를 늘리는 방안이 있으나 턴 수에 따라 코일 저항이 늘어나, 도통 손실이 증가하는 문제가 있다. 또한 낮은 자화 인덕턴스는 높은 자화전류에 의한 컨버터의 1차 측 전류의 상승을 야기하며, 도통손실을 증가시킨다. 따라서 본 논문에서는 무선 전력 전송용 컨버터의 최적 설계를 임피던스 변화의 관점에서 수학적인 분석을 통해 제안하고, 그에 따른 시뮬레이션으로 검증하고자 한다.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.98-107
• /
• 2006

Magnetization Transfer (MT) imaging generates contrast dependent on the phenomenon of magnetization exchange between free water proton and restricted proton in macromolecules. In biological materials in knee, MT or cross-relaxation is commonly modeled using two spin pools identified by their different T2 relaxation times. Two models for cross-relaxation emphasize the role of proton chemical exchange between protons of water and exchangeable protons on macromolecules, as well as through dipole-dipole interaction between the water and macromolecule protons. The most essential tool in medical image manipulation is the ability to adjust the contrast and intensity. Thus, it is desirable to adjust the contrast and intensity of an image interactively in the real time. The proton density (PD) and T2-weighted SE MR images allow the depiction of knee structures and can demonstrate defects and gross morphologic changes. The PD- and T2-weighted images also show the cartilage internal pathology due to the more intermediate signal of the knee joint in these sequences. Suppression of fat extends the dynamic range of tissue contrast, removes chemical shift artifacts, and decreases motion-related ghost artifacts. Like fat saturation, phase sensitive methods are also based on the difference in precession frequencies of water and fat. In this study, phase sensitive methods look at the phase difference that is accumulated in time as a result of Larmor frequency differences rather than using this difference directly. Although how MT work was given with clinical evidence that leads to quantitative model for MT in tissues, the mathematical formalism used to describe the MT effect applies to explaining to evaluate knee disorder, such as anterior cruciate ligament (ACL) tear and meniscal tear. Calculation of the effect of the effect of the MT saturation is given in the magnetization transfer ratio (MTR) which is a quantitative measure of the relative decrease in signal intensity due to the MT pulse.

• Journal of the Korean Magnetics Society
• /
• v.8 no.5
• /
• pp.300-307
• /
• 1998

The $Co_{90}Fe_{10}$ single layer films were deposited on various substrates (glass, Si, polymide) using high vacuum RF magnetron sputtering system and nominall 1000 $\AA$ thick $Co_{90}Fe_{10}$ alloy films had a good high frequency characteristic. $M_S$ and $H_{an}$ values obtained from the B-H characteristic of the $10{\times}[100 nm \;Co_{90}Fe_{10}/100 nm\; SiO_2]$ multilayers agreed well with those obtained by calculation. Complex relative permeability $(={\{\mu}_r={\mu}_r',-j{\mu}$\mu$_r")$ at frequency f was measured from the transmission characteristics $(S_{11},\; S_{21}\;parameters)$ of the microstrip line which has a stacked structure consisting of sample magnetic films and a conductor and is connected to a network analyzer. The ${\mu}_r'-f$ characteristic was abtained from the megnetic absorption, which was analyzed from the S-parameter characteristics of the microstrip line. The ${\mu}_r'-f$ characteristic was also calculated from the ${\mu}_r"-f$-f characteristic using the Kramers-Kronig relation. The measurement results were confirmed to agree well with those obtained by calculations.culations.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.150-153
• /
• 1994

Magnetic field annealing method has been used to obtain proper hysteresis loop shapes which are useful to a device using amorphous ribbon. In this study, two pairs of Helmhotz coils were used to apply longitudinal and transverse magnetic field during annealing. For the measurement of coercive field strength noise which depends on magnetic field annealing, Co-based amorphous alloy ribbon $VITROVAC^{\circledR}$ 6030 was used. For the sample which was annealed under dc transverse and dc longitudinal magnetic field, coercive field strength noise was nearly independent of magnetizing frequency ranging from 1 to 100 kHz, but dc transverse and ac longitudinal magnetic fields annealed samples show that the coercive field strength noise decreased in power of magnetizing frequency. When magnetic domain nucleation occurred, the coercive field strength noise increased remarkably and decreased in power of magnetizing frequency.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.49-55
• /
• 2011

Because of causing the geometrical transformation of the magnetic field, the patient implementing the fixation using the nonmagnetic metal screw causes the magnetic susceptibility artifact at an image. Thus, in this research, the distortion measure of the image according to the frequency oblique direction conversion tried to be compared in the magnetic susceptibility artifact occurence. First, the itself phantom inserting the nonmagnetic metal screw of the titanium component was made and the region of interest was set up and the frequency oblique direction the anterior - back side was converted to the right-to-left direction in the axial image and a right-to-left was converted to the upper side - bottom side in the coronal plane and the upper - bottom side was converted to the anterior - back side in the sagittal plane and the distortion measure of the region of interest was compared, it observed. In a result, when converting the frequency oblique direction, the distortion difference of the region of interest could be confirmed and it is considered to enhance the diagnostics efficiency changing the oblique direction appropriately.

• Journal of the Korean Magnetics Society
• /
• v.22 no.6
• /
• pp.195-199
• /
• 2012

Using micromagnetic simulation, we investigated the effect of thickness of a nanodisk on a resonance frequency of vortex gyration. We observed that the resonance frequency increases with increasing thickness in both cases of 2-dimensional (2D) and 3-dimensional (3D) calculation. However, there is a difference in the increasing rate of resonance frequency between 2D and 3D modeling owing to dynamically developed inhomogeneous magnetic texture along the thickness direction of disk in 3D modeling.