• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1113-1117
• /
• 2005

보 상류의 유속 및 수심과 같은 흐름 조건은 보, 하천 형상, 그리고 하류 흐름 특성에 의해 좌우된다. 본 연구에서는 하류 조건에 따라 보 상류의 흐름 특성에 미치는 영향을 검토하였다. 이를 위해 구형단면의 수로에 하천설계지침(2002)에 따라 보를 제작하여 설치하였으며 보에서의 임계수심 및 이에 따른 유량의 변화를 파악하였으며 실험결과를 기존 문헌과 비교$\cdot$분석하였다. 또한 자유 월류로 빠른 유속을 지닌 흐름이 수로의 마찰저항과 하류 배수효과에 의해 에너지 소멸로 나타나는 도수현상을 관측하여 발생특성을 파악하였다. 도수의 발생조건은 Posey와 Hsing(1938)에 제시한 결과와 유사한 결과를 보였으며 하류영향에 따른 도수 발생 위치는 하류단 수위와 일정한 관계를 갖고 있으나 유량과는 선형적인 관계를 보이지 않는 것을 알 수 있었다. 또한 임계수심 설정에 대해 Knap(1960)이 제시한 산정식과 비교한 결과 유량이 작은 경우 거의 일치하는 결과를 보였으나 유량이 증가할수록 오차가 커졌다. 임계수심 전$\cdot$후의 유량계수를 살펴본 결과 하류 조건에 의해 임계수심을 넘으면 유량계수가 자유 월류 시보다 약 $2\%\~6.5\%의 감소를 나타냈으며 공급유량이 $0.05m^3/s$ 일 경우 유량계수의 차이가 가장 큰 것을 알 수 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.123-132
• /
• 2010

To overcome the drawback of currently available curved beam theories having non-symmetric thin-walled cross sections, a curved beam theory based on centroid-shear center formulation is presented for the spatially coupled free vibration and elastic analyses. For this, the displacement field is expressed by introducing displacement parameters defined at the centroid and shear center axes, respectively. Next the elastic strain and kinetic energies considering the thickness-curvature effect and the rotary inertia of curved beam are rigorously derived by degenerating the energies of the elastic continuum to those of curved beam. In order to illustrate the validity and the accuracy of this study, FE solutions using the Hermitian curved beam elements are presented and compared with the results by centroid formulation, previous research and ABAQUS's shell elements.

• Korean Journal of Logic
• /
• v.22 no.2
• /
• pp.233-251
• /
• 2019

In this paper, I raise objections to Sungsu Kim's argument that Sartorio's hard-line reply to the manipulation argument fails. In attacking Sartorio's argument, Sungsu Kim claims that there are two problems with Sartorio's. I argue that Sungsu Kim's argument fails by responding to these two problems. With respect to the first problem, I provide a new example of dilution of responsibility. With respect to the second problem, I argue that, contrary to what Sungsu Kim assumes, for Sartorio's argument to succeed, our intuition that Ernie is responsible in the Lightning Strike Scenario does not have to be as strong as our intuition that Ernie is not responsible in the Diana scenario.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.469-479
• /
• 2001

In the present study, free vibration analysis of multi-delaminated beams is performed. In order to investigate the effects of mu1ti-delaminations on the dynamic characteristics of multi-delaminated beams, the general kinematic continuity conditions are derived from the assumption of constant curvature at the multi-delamination tip. Frequency equations of multi-delaminated beams are obtained by dividing the global multi-delaminated beam into beam segments and by imposing recurrence relation from the continuity conditions un each sub-beam. The comparisons between the results of numerical analysis obtained by finite element analysis and those of present analysis give good agreement with each other. It is shown that the effects of multi-delaminations on free vibration characteristics of laminated beams could be used to detect their sizes, types and locations from the results.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.600-606
• /
• 2007

3D finite element analyses of a corrugated steel web girder and a steel truss web girder are conducted to investigate the static and dynamic behaviour of the hybrid girders. And the analyses results are compared with those by the equivalent beam theory. The equivalent theory is a theory that all section properties of a truss structure are replaced by section properties of a beam including a shear coefficient. When applying the equivalent beam theory, the shear coefficient of the corrugated steel web girder is estimated as the area ratio of flange section to web section and that of the steel truss web girder is calculated by the equation proposed by Abdel. Static deflections and natural frequencies by 3D finite element analyses and those by the equivalent beam theory are in good agreement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.165-171
• /
• 2013

Due to the difficulty in considering dynamic load in the view point of a computer resource and computing time, it is common that external load is assumed as ideal static loads. However, structural analysis under static load cannot guarantee the safety of design of the structures under dynamic loadings. Recently, the systematic method to construct equivalent static load from the given dynamic load has been proposed. Previous study has calculated equivalent static load through the optimization procedure under displacement constraints. However, previously reported works to distribute equivalent static load were based on ad-hoc methods. Improper selection of equivalent static loading positions may results in unreliable prediction of structural design. The present study proposes the selection method of the proper locations of equivalent static loads to dynamically applied loads when we consider transient dynamic structural problems. Moreover, it is appropriate to take into account the stress constraint as well as displacement constraint condition for the safety design. But the previously reported studies of equivalent static load design methods considered only displacement constraint conditions but not stress constraint conditions. In the present study we consider not only displacement constraint but also stress constraint conditions. Through a few numerical examples, the efficiency and reliability of proposed scheme is verified by comparison of the equivalent stress between equivalent static loading and dynamic loading.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.163-172
• /
• 2010

The free viewpoint video delivers an active contents where users can see the images rendered from the viewpoints chosen by them. Its applications are found in broad areas, especially museum tour, entertainment and so forth. As a new free-viewpoint application, this paper presents a stereoscopic free-viewpoint TIP (Tour Into Picture) where users can navigate the inside of a single image controlling a virtual camera and utilizing depth data. Unlike conventional TIP methods providing 2D image or video, our proposed method can provide users with 3D stereoscopic and free-viewpoint contents. Navigating a picture with stereoscopic viewing can deliver more realistic and immersive perception. The method uses semi-automatic processing to make foreground mask, background image, and depth map. The second step is to navigate the single picture and to obtain rendered images by perspective projection. For the free-viewpoint viewing, a virtual camera whose operations include translation, rotation, look-around, and zooming is operated. In experiments, the proposed method was tested eth 'Danopungjun' that is one of famous paintings made in Chosun Dynasty. The free-viewpoint software is developed based on MFC Visual C++ and OpenGL libraries.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.5
• /
• pp.492-501
• /
• 2010

Equations of motion of thin-walled composite H-type cross-section beams incorporating a number of nonclassical effects of transverse shear and primary and secondary warping, and anisotropy of constituent materials are derived. The vibrational characteristics of a composite thin-walled beam exhibiting the circumferentially asymmetric stiffness system(CAS) and the circumferentially uniform stiffness system(CUS) are exploited in connection with the bending-transverse shear coupling and the bending-twist coupling resulting from directional properties of fiber reinforced composite materials.

• Computational Structural Engineering
• /
• v.3 no.2
• /
• pp.67-75
• /
• 1990

A stepped beam with immovable ends under the free and forced vibrations with large amplitude is investigated by using the finite element method to show the effects of longitudinal displacement, shear deformation and rotary inertia. A modified harmonic force matrix is introduced for analysis of finite amplitude vibration of the stepped beam under uniform harmonic loading and a beam under nonuniform harmonic loading. Numerical examples are analysed for deflections and natural frequencies of stepped beam under various support conditions. Results show that the proposed method is valid and efficient.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.1
• /
• pp.66-73
• /
• 2011

This paper deals with free vibrations of the tapered beams with the constant surface area. The surface area of the objective beams are always held constant regardless shape functions of the cross-sectional depth. The shape functions are chosen as the linear and parabolic ones. Ordinary differential equations governing free vibrations of such beams are derived and solved numerically for determining the natural frequencies. In the numerical examples, hinged-hinged, hinged-clamped and clamped-clamped end constraints are considered. As the numerical results, the relationships between non-dimensional frequency parameters and various beam parameters such as section ratio, surface area ratio, end constraint and taper type are reported in tables and figures. Especially, section ratios of the strongest beam are calculated, under which the maximum frequencies are achieved.