• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.331-344
• /
• 2002

The purpose of this study was to compare between success and failure in bowling throw motions. For the data analysis, it was utilized by the method of three dimensional motion analysis and obtained kinematical parameters of stride, COG position and ball position through the address and release motion. The subjects of this study were three female bowling players, and obtained conclusions were as follows; Displacements of stride were not significance of success events, 4th and 5th phase stride were longer than failure. COG variation for height were less than failure, but there not significance between success and failure. The ball position of 3 th phase was lowest than other phases, and throw motions were stable by the small variations for upward downward.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.408-411
• /
• 2010

본 논문에서는 의약품, 음료수병 등 액체용기에 부착이 가능하며, 주변 유전체에 의한 성능열화가 적고 소형으로 바코드를 대신하여 용기에 부착이 가능한 플렉시블 RFID 특수태그 안테나를 제안하였다. 제안된 태그 안테나는 PET 기판 위에 미앤더 기법으로 제작되어 제작 및 대량 생산에 용이하며, 범용 RFID의 사용주파수 (860~960MHz)를 만족시키고, 주변 유전물의 영향으로 인한 성능변화를 최소화할 수 있도록 설계하였다. 제안된 태그 안테나는 본체 중앙부에 T 정합회로를 사용하고 미앤더 구조와 직선 구조의 보조선로 2개를 본체 상단에 삽입하여, 캐패시티브 결합을 이용해 태그칩과의 임피던스 공액정합이 쉽게 이루어지도록 하였다. 또한 2개의 보조선로가 각각 다른 부착물체의 유전율에 상호 보완적으로 전류를 유기시 키도록 하여 주변 유전 물질의 영향에 의한 반사손실을 만족하도록 하였다. 본 태그의 성능은 송신출력 20dBm, 안테나 이득 6dBi인 리더 안테나를 사용하였을 때 자유공간에서는 3.5m, 유리 부착 시 2.61m, 액체가 든 유리병 부착 시 2.51m 의 인식거리 성능을 보였다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.63-72
• /
• 1990

The linear hydrodynamic forces, acting on a forced oscillating cylinder from its mean position on a free surface with a small amplitude, are calculated in the time domain. The integral equation method using a time dependent Green function is employed. The numerical results for the heaving and swaying circular cylinder are shown and give good agreements with others Furthermore it is shown that the use of the Green function, which is expressed by a series expansion or asymptotic expansion according to time range, reduces computing time greatly.

• Explosives and Blasting
• /
• v.32 no.3
• /
• pp.10-17
• /
• 2014

In this study, the effect of the hole spacing and the detonation delay time in the long hole blasting of two free surface rock mass on the variation of the principal strains in the vicinity of blasting holes is investigated by use of the finite element program, Visual FEA. The cross section perpendicular to blasting holes is modelled and the maximum principal strains at some major points in the cracking zone are examined. As a result, it was found that the maximum principal strain in the cracking zone becomes larger in the long hole blasting with the narrower hole spacing and the longer detonation delay time. The maximum principal strain was affected by the detonation position in charge hole.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.364-364
• /
• 2022

최근 기후변화에 따른 잦은 이상 가뭄으로 물 부족 현상이 심화되고 있어 물 안보가 중요한 사회적 이슈로 부각되고 있다. 물 부족에 대비하기 위해 수자원은 인류가 마음대로 사용할 수 있는 자유재가 아니라 보호·관리하여야 하는 대상으로, 보유한 미사용량을 회수·재배분하여 물 이용의 공정성을 강화 등 물 이용 제도의 전반에 대한 검토·개선이 필요한 실정이다. 하지만 일부 유역에서는 하천수 사용량이 정확하게 계측되지 않아 공정한 하천수 배분 등에 한계가 발생하고 있다. 본 연구에서는 충주댐 하류 유역에 위치한 자동유량측정소 원주시(남한강대교)와 여주시(남한강교) 상·하류 유량자료를 검토·분석하여 하천수 사용허가권에 등재된 하천수 이용량을 검토하고자 한다. 아울러 상·하류 자동유량관측소 내 지류 하천(섬강, 청미천)이 유입되고 있어, 추가 유입량을 고려한 물수지 분석을 위해 원주시(문막교)수위관측소, 여주시(원부교)수위관측소의 유량자료를 이용하였다. 상·하류 유량자료 검토 결과, 지류 유입량 + 하류 여주시(남한강교)) 유량이 상류 원주시(남한강대교) 유량보다 작은 상·하류 유량이 역전('19~'20, 평균 787,753m³/day)되는 흐름이 발생하였다. 구간 내 등재된 취수시설물(11개소) 허가량(39.66×10⁶m³) 보다 실재 사용량은 많을 것으로 추정되며 상·하류 역전 흐름에 직접적인 영향을 준 것으로 판단된다, 또한 현장 조사에서 허가대장에 미등재된 다수의 시설을 발견하였으며 이는 하천수의 효율적인 관리에 장애요인으로 작용된다. 하천수 사용은 복합허가사항으로 홍수통제소에서 사용허가부터 관리까지 실시하고 있는데 하천수 허가 신청량은 계획수요량 산정과 물수지 분석결과를 통하여 적정성 검토가 이루어지고 있다. 그러나 하천수 사용허가량 대비 실제 하천수 취수량이 얼마나 되는지 파악은 불가능한 실정이다. 결국 하천 유량을 관리하기 위해 강수량, 수위, 유량 등 많은 수문요소를 정확하게 측정하는 것도 필요하지만 이처럼 하천수 이용을 위해 취수되는 양을 정확하게 계측하지 않는다면 효율적인 하천수 관리는 어렵다. 하천수를 관리하고 효율적으로 이용하기 위해 하천수 이용에 대한 제도적인 보완이 필요해 보인다.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.281-288
• /
• 2022

This study quantitatively analyzed the human casualties that can occur when a multicopter-type Urban Air Mobility (UAM) with a weight of about 1 ton and a speed of about 100 km/h falls in an urban area. Based on the population density and building database in Seoul, the population exposed to collisions in the event of a UAM crash was derived. Through the ballistic descent model, the accident impact radius of the UAM fall was calculated. In addition, the change in human casualties on the ground was analyzed when the accident impact radius increased. Finally, the ground risk map was created for Seoul, and it was confirmed that about 1 to 10 people could be injured when a UAM crash.

• Journal of the Economic Geographical Society of Korea
• /
• v.23 no.1
• /
• pp.93-109
• /
• 2020

The purpose of this study is to examine the effects of industrialization and urbanization of Gwangyang Bay Region on the change of urban system and spatial structure between triangle-cities located in Gwangyang Bay, Yeosu City, Suncheon City, and Gwangyang City, one of the famous industrial zones in Korea. Large-scale development projects carried out by the central government in the Gwangyang Bay Region such as construction of the Second Oil Refinery in the mid-1960s, completion of the POSCO Gwangyang Steelworks in the mid-1980s, construction of the Gwangyang Port Container Terminal in 1987 and designation of the Gwangyang Bay Area Free Economic Zone in 2003, and EXPO 2012 Yeosu Korea, affected to changes of the urban system and spatial structure between triangle-cities in Gwangyang Bay Region. The above four-development projects transformed the urban and spatial structures between the three cities in the Gwangyang Bay Region from a mononuclear urban system centered on Suncheon to a network city system. Historically, Suncheon has served as an exclusive center in the eastern region of Jeonnam, including the Gwangyang Bay Region. However, the hosting of the 2012 Yeosu Expo Korea is reorganizing the three cities into a network-type spatial structure with the strengthening of connectivity and integration in the region. And this trend is expected to intensify in the future.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.429-436
• /
• 2012

This study was conducted to examine the effect of feeding levels of concentrate feed on growth performance, meat quality and economic evaluation of Korean black goats. The 40 male Korean native goat were divided into four treatment groups T1 (1.5%), T2 (2.0%), T3 (2.5% feeding of concentrate feed body weight per day) and T4 (ab libitum) with ab libitum rice straw. Rice straw intake decrease as against feeding levels, however average daily gains were 22, 50, 69 and 94 g/day in T1, T2, T3 and T4 groups respectively levels (p<0.05). Dressing percentage were 41.77, 42.78, 46.12 and 49.78% in each group (p<0.05), also fat percentage were a significant increase according to feeding levels. In economic efficacy, T4 was higher than other treatment groups. In conclusion, both rice straw and concentrate feed ab libitum are good for feeding and management system on Korean black goats.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.2
• /
• pp.41-48
• /
• 2019

Soil compaction is one of the most important activities in the area of civil works, including road construction, airport construction, port construction and backfilling construction of structures. Soil compaction, particularly in road construction, can be categorized into subgrade compaction and roadbed compaction, and is significant work that when done poorly can serve as a factor causing poor construction due to a lack of compaction. Currently, there are many different types of compaction tests, and the plate bearing test and the unit weight of soil test based on the sand cone method are commonly used to measure the degree of compaction, but many other methods are under development as it is difficult to secure economic efficiency. For the purpose of this research, a portable penetration meter called the Free-Fall Penetration Test (FFPT) was developed and manufactured. In this study, a homogeneous sample was obtained from the construction site and soil was classified through a sieve analysis test in order to perform grain size analysis and a specific gravity test for an indoor test. The principle of FFPT is that the penetration needle installed at the tip of an object put into free fall using gravity is used to measure the depth of penetration into the road surface after subgrade or roadbed compaction has been completed; the degree of compaction is obtained through the unit weight of soil test according to the sand cone method and the relationship between the degree of compaction and the depth of the penetration needle is verified. The maximum allowable grain size of soil is 2.36 mm. For $A_1$ compaction, a trend line was developed using the result of the test performed from a drop height of 10 cm, and coefficient of determination of the trend line was $R^2=0.8677$, while for $D_2$ compaction, coefficient of determination of the trend line was $R^2=0.9815$ when testing at a drop height of 20 cm. Free fall test was carried out with the drop height adjusted from 10 cm to 50 cm at increments of 10 cm. This study intends to compare and analyze the correlation between the degree of compaction obtained from the unit weight of soil test based on the sand cone method and the depth of penetration of the penetration needle obtained from the FFPT meter. As such, it is expected that a portable penetration tester will make it easy to test the degree of compaction at many construction sites, and will lead to a reduction in time, equipment, and manpower which are the disadvantages of the current degree of compaction test, ultimately contributing to accurate and simple measurements of the degree of compaction as well as greater economic feasibility.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.119-122
• /
• 2002

The vibration qualification test of satellite antenna is required to verify that there will be no structural damage due to the severe vibration caused by the launch of satellite. For the qualification test, reasonable test load condition needs to be introduced by dynamic analysis. The present work has been performed to provide an understanding how the qualification test load can be evaluated by the results of both normal mode and sine vibration analyses with notching technique for a composite Ka-band antenna structure.