Browse > Article

Comparative Study on the Maximum Principal Strain due to the Hole Spacing and the Detonation Delay Time in the Long-Hole Blasting  

Song, Jeong-Un (전북대학교 자원.에너지공학과)
Park, Hoon (전북대학교 자원.에너지공학과)
Kim, Seung-Kon (전북대학교 자원.에너지공학과)
Publication Information
Explosives and Blasting / v.32, no.3, 2014 , pp. 10-17 More about this Journal
Abstract
In this study, the effect of the hole spacing and the detonation delay time in the long hole blasting of two free surface rock mass on the variation of the principal strains in the vicinity of blasting holes is investigated by use of the finite element program, Visual FEA. The cross section perpendicular to blasting holes is modelled and the maximum principal strains at some major points in the cracking zone are examined. As a result, it was found that the maximum principal strain in the cracking zone becomes larger in the long hole blasting with the narrower hole spacing and the longer detonation delay time. The maximum principal strain was affected by the detonation position in charge hole.
Keywords
Maximum principal strain; Finite element; Long hole blasting;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 민형동, 정민수, 진연호, 박윤석, 2008, 소단면 터널에서 에멀젼폭약의 사압현상과 대책, 화약.발파, Vol. 26, No. 2, pp. 29-37.
2 유희룡, 2007, 구조물-유체-지반의 동적 상호작용 해석을 위한 유한요소 모델링, 공학박사학위 논문, 전북대학교, pp. 122-155.
3 이기근, 김갑수, 양국정, 강대우, 허원호, 2012, 전방 자유면의 암반 이동에 관한 연구, 화약.발파, Vol. 30, No. 2, pp. 29-42.
4 이승찬, 2005, 화약의 폭속이 발파에 미치는 영향 검토, 화약.발파, Vol. 23, No. 3, pp. 43-56.
5 이춘우, 양형식, 송승곤, 2000, 천공패턴 및 기폭시차의 변화에 의한 파쇄암의 입도 분포 연구, 화약.발파, Vol. 18, No. 4, pp. 43-53.
6 윤지선, 우택규, 김민우, 장영민, 2009, 응력장을 고려한 프리스플리팅 공법의 균열발생 원리에 대한 연구, 화약.발파, Vol. 27, No. 2, pp. 1-11.
7 조영곤, 김희도, 안봉도, 2002, 장약조건에 따른 폭속 변화 연구, 화약.발파, Vol. 20, No. 1, pp. 61-66.
8 Newmark, N.M., 1959, A method of computation for structural dynamics, Journal of the Engineering Mechanics Division, Vol. 85, pp. 67-94.
9 Zaman, M.M., Desai, C.S., Drumm, E.C., 1984, Interface model for dynamic soil-structure interaction, Journal of Geotechnical Engineering, Vol. 110, pp. 1257-1273.   DOI