• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.2
• /
• pp.92-99
• /
• 1991

A moored body in the sea is subjected to second-order wave forces as well as to linear oscillatory ones. The second-order farces contain slowly-varying components, of which the characteristic frequency can be as low as the natural frequency of horizontal motions of the moored body. As a consequence, the slowly-varying force can excite unexpectedly large horizontal excursion of the body, which may cause a serious damage on the mooring system. In design analysis of Turret-type mooring system which is one of the interesting mooring systems for a floating body. the slowly-varying drift forces and the transient motion of the system during weathervaning are very important. In this paper the slowly-varying drift forces were calculated by using the Quadratic Transfer Function with considering the second order free-wave contributions. Additionaly the transient surge motion of the moored body was simulated with including the roll of the time-memory effect. In this simulation the spring constant of the spread Turret mooring system is updated at every time step for considering the nonlinear effect.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.700-703
• /
• 2010

In this study, plant extracts including Eucommia ulmoides Oliv. and Phellodendron amurense were studied to test possible application for cosmetics and skin related medicine. Anti-oxidation effect of plant extracts was measured by DPPH free radical scavenging activity and it was insignificant at low concentration, however, it was as good as vitamin C, excellent anti-oxidation agent, at $1000{\mu}g/ml$. Anti-bacterial effect was tested by disc diffusion method, and plant extracts showed mild anti-bacterial effect for normal skin flora, Staphylococcus epidermidis while it indicated strong anti-bacterial effect for acne inducing Propionibacterium acne. Therefore it had powerful potential for anti-acne material because of selectivity. Anti-atopic dermatitis effect was tested by hairless mouse and plant extracts recovered damaged skin to near normal condition after 14 days of treatment. IgE concentration in treated mouse was decreased 16% compared with control. From the research, plant extracts indicated strong anti-acne and anti-atopic dermatitis effect, and showed strong potential for cosmetics and skin related medicine.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.69-73
• /
• 2018

This study examined the reduction effect of a hydrodynamic force acting on the vertical wall of a portable water storage tank with a convex bottom floor. For the numerical simulation, the linearized Peregrine's equation was used to analyze the lapping waves in the tank caused by water falling from a supplying nozzle. The hydrodynamic force could be calculated by measuring the maximum run-up wave height at the vertical wall. The initial conditions of the numerical experiments were set up by controlling the positions and heights of the water supplying nozzle. Finally, the hydrodynamic force acting on the vertical wall can be reduced by the convex bottom design of the portable water storage tank so it can be applied to improve the structural stability.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.30-37
• /
• 2000

The roll damping characteristics of the three models of a 3ton class fishing vessel, that is the bare hull, hull with bilge keels, and hull with bilge keels and a central wing are investigated by the free roll tests in head waves in a towing tank with the variations of the forward speed, initial angle and OG. The wave length variations are also included. The experimental results are compared with the numerical results of mathematical modellings by the energy method for these three models and the energy dissipation patterns are also compared. The roll damping speed increases, the effect of the waves on the roll damping of the models with the additional devices is negligible due to the much increased damping caused by the lift increase.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.536-547
• /
• 1997

For various angular velocities of crucible and crystal, the characteristics of melt flows, temperatures and concentrations of oxygen are numerically studied in the Czochralski furnace with a uniform axial magnetic field. Buoyancy effect due to the heating of crucible wall and thermocapillary effect due to the temperature gradient at the free surface, can be differentiably suppressed by the centrifugal forces due to the rotations of the crucible and crystal. The most important factor which yields the centrifugal forces is the rotation velocity of the crucible, that influences the fields of velocities, temperatures and concentrations. In the case that the crucible rotation velocity is not high, the rotations of the crystal gives rise to the centrifugal forces effectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.31-38
• /
• 2000

Pressure vessels by composite materials were damaged sometimes during manufacturing or assembling. The state and the size of damage by low-velocity tests were investigated in this paper. Impactors of various masses and various tup shapes were dropped freely in the range of 120mm height to 700mm height. Compared with hemispherical tup of 12.7mm diameter, for hemispherical tup of 25.4mm diameter the size of surface dent was smaller but the size of delamination was bigger.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.125-131
• /
• 1997

Most dynamic systems have are known to various random properties in excitation and system parameters. In this paper, a procedure for response analysis is proposed for the linear dynamic system with random properties in both excitation and system parameters. The system parameters and responses with random properties are modeled by perturbation technique, and then response analysis is formulated by probabilistic and vibration theories. And probabilistic FEM is also used for the calculation of mean response which is difficult by the proposed response model. As an applicative example, the transient response is considered for systems of single degree of freedom with random mass and spring constant subjected to stationary white-noise excitation and the results are compared to those of numerical simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.363-368
• /
• 2003

In this paper, the characteristics of the horn antenna for the high power transfertation system is stuided and several kinds of a horn antenna are compared and finally a conical hem antenna using multi-mode is proposed. In the high power system, the efficiency of power transfer is very important. Therefore the feeding hem of a reflector must have a circular symmetric radiation pattern. And the side lobe must be suppressed to reduce a spillover power loss and interference. By using multi-mode in a circular hem antenna, the whole length can be shorter and the radiation pattern can be adjusted according to the shape and direction of a reflector. This is confirmed by the experiments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1589-1596
• /
• 2011

Mulberry was added to bulgogi marinade sauce at concentrations of 5, 10, 15, and 20%. Moisture content, crude ash, crude protein, and crude fat in the control group were 62.2~62.6%, 3.5~3.6%, 2.2~2.4%, and 1.5~1.6%, respectively. The moisture contents significantly increased with mulberry content. Crude ash, protein, and fat contents relatively decreased as the amount of mulberry in the sample increased. DPPH radical scavenging activity of fresh mulberry was also measured. Fresh mulberry showed higher antioxidant activity in the marinade, and it increased with the mulberry content. Color L, a, and b values of the marinade containing 5% mulberry were 25.41, 3.1, and 4.3, respectively, and all values significantly decreased as the amount of mulberry in the marinade increased. Sensory evaluation of bulgogi marinade was performed by trained panelists. Bulgogi marinade prepared with 15% mulberry content showed a significantly higher score in the sensory evaluation.