• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.531-542
• /
• 2018

Batch sorption experiments were performed to remove the uranium (U) in groundwater by using the bamboo charcoal. For 2 kinds of commercialized bamboo charcoals in Korea, the U removal efficiency at various initial U concentrations in water were investigated and the optimal sorption conditions to apply the bamboo charcoal were determined by the batch experiments with replicate at different pH, temperature, and reaction time conditions. From results of adsorption batch experiments, the U removal efficiency of the bamboo charcoal ranged from 70 % to 97 % and the U removal efficiency for the genuine groundwater of which U concentration was 0.14 mg/L was 84 %. The high U removal efficiency of the bamboo charcoal maintained in a relatively wide range of temperatures ($10{\sim}20^{\circ}C$) and pHs (5 ~ 9), supporting that the usage of the bamboo charcoal is available for U contaminated groundwater without additional treatment process in field. Two typical sorption isotherms were plotted by using the experimental results and the bamboo charcoal for U complied with the Langmuir adsorption property. The maximum adsorption concentration ($q_m:mg/g$) of A type and C type bamboo charcoal in the Langmuir isotherm model were 200.0 mg/g and 16.9 mg/g, respectively. When 2 g of bamboo charcoal was added into 100 mL of U contaminated groundwater (0.04 ~ 10.8 mg/L of initial U concentration), the separation factor ($R_L$) and the surface coverage (${\theta}$) maintained lower than 1, suggesting that the U contaminated groundwater can be cleaned up with a small amount of the bamboo charcoal.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.37-43
• /
• 2019

This research studied production of lightweight filling production for sink hole restoration utilizing various industrial by-products(2kinds of fly ash, petro-cokes CFBC ash, blast furnace slag fine particle). For this purpose, the mixed raw material properties(compressive strength) behaviors according to the blending ratio of industrial by-products were examined by applying the experimental design method and statistical analysis was performed using the commercial program MINITAB. Compressive strengths of industrial by-products were strongly dependent on blast furnace slag powder. Compressive strength(3days aging) was 3~11MPa depending on the amount of blast furnace slag powder used. The use of CFBC fly ash was evaluated to have the least effect on compressive strength. In addition, the compressive strength and the coefficient of permeability were measured by preparing foamed concrete for the experimental batch 1 condition in the mixture experimental design. In this case, the bulk density is 0.9 to 1.0, the apparent porosity is 30 to 50%, the compressive strength(3days old) is 1 to 2MPa, and the permeability coefficient is $10^{-2}$ to $10^{-3}cm/sec$.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.28 no.2
• /
• pp.56-63
• /
• 2017

This study was conducted to determine the effects of supplementary levels of dietary betaine and energy on nutrient digestibility and physiological responses in growing pigs exposed to heat stress. A total of 12 barrows ($L{\times}Y{\times}D$; initial BW, $67.1{\pm}0.98kg$) were allocated into individual metabolic crates. Experimental design was a $4{\times}4$ Latin square with dietary energy and betaine levels (3,300 and 3,400 kcal/kg; 0 and 0.5%, respectively) and the experimental period (n=4). Feeding trial was performed during summer season (July and August). Digestibility of crude fat was higher (p<0.01) in the ME 3,400 kcal/kg than the ME 3,300 kcal/kg, but did not differ by betaine (p>0.05). Blood corpuscles and biochemical components were not influenced by dietary energy and betaine levels (p>0.05). Serum IgG was greater (p<0.05) in the ME 3,400 kcal/kg than the ME 3,300 kcal/kg, but cortisol was not differ among the treatment groups (p>0.05). In conclusion, our results showed positive effects by energy levels rather than betaine. Thus, further study need investigation of effects of high energy level in the pigs exposed to heat stress.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.2
• /
• pp.5-17
• /
• 2021

The Moon has been an attractive planet as an outpost for deep space exploration since He-3 and water ice which can be used as energy resources were discovered. In-Situ Resource Utilization (ISRU) construction material fabrication method is required for sustainable space planet exploration. In this paper, the possibility of microwave sintering technology for construction material fabrication was evaluated using lunar regolith that can be easily collected from the Moon surface. Experimental assessment of the influence factors on microwave sintering was conducted using a hybrid sintering system for efficient processing. The heat distribution in the furnace was observed using thermal paper that is coated with a material formulated to change color when exposed to heat. Based on this result, sintered cylindrical KLS-1s with a diameter of 1 cm and a height of 2 cm were fabricated. Densities were measured for the sintered KLS-1s under rotating turntable conditions that have an effect of microwave dispersion. The more dielectrics were arranged, the more microwaves were dispersed reducing the heat concentration, and thus a uniformity of sintered KLS-1s was enhanced.

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.275-283
• /
• 2020

This experiment was conducted to investigate the effect of the addition of enzymes and microorganisms to broiler feed on productivity, carcass characteristics, intestinal microflora, and feces odor. A total of one-hundred eighty 180 chicks (Ross 308) were randomly assigned to 5 treatments with 3 replications each having 12 birds per pen. The experimental group was divided into 0.1% EZ group (0.1% metallo-protease added to the feed), 0.2% EZ group (0.2% metallo-protease added to the feed), M group (2.0% Bacillus veleznesis CE 100 added to the feed), and MW group (2.0% Bacillus veleznesis CE 100 added to the feed and drinking water). In the results, final body weight, body weight gain, the feed conversion ratio, protein efficiency, and energy efficiency were not significantly different among all treatments in across all periods. Carcass weight, proventriculus, gizzard, heart, small intestine, cecum, and rectum weight were not significantly different among all of the treatments. However the liver weight was significantly higher in the 0.1% EZ group than in the control, M and MW groups (P< 0.05). E. coli was significantly lower in MW than in the control and M (P<0.05), and it was significantly higher in the M than 0.2% EZ and MW (P<0.05). H2S emissions in feces was not significantly different among all treatments, but NH3 emissions was were significantly higher in 0.1% EZ than in MW (P<0.05). In conclusion, the addition of 0.1% of metallo-protease was effective in the development of the liver of broilers.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.30 no.4
• /
• pp.165-171
• /
• 2019

The objective of this study was to investigate the effects of gender on meat quality traits and sensory characteristics of pork loin. A total of 90 pork carcasses (180 days old, 45 barrows and 45 gilts, each gender group was consisted of fifteen 1+, 1 and 2 carcass grades) were selected and loin cuts were excised to investigate meat quality, electronic tongue measures and sensory panel test. There were significant differences in drip loss (1.66% vs 1.21%), released water (12.19% vs 10.68%) and cooking loss (23.67% vs 21.04%) between loins from barrow and gilt (p<0.05). However, no significant differences in meat color (CIE L^* a^* b^*) and shear force were observed between gender groups (p>0.05). Umami and richness values of barrow were significantly higher than those of gilt, while barrow had significantly lower sourness value compared to gilt(p<0.05). On the sensory evaluation, barrow scored higher in flavor, juiciness and tenderness both, and as a result, barrow (5.51 points) also scored significantly higher than gilt (4.86 points). These results suggest that the umami intensity and sensory taste of barrow loin are superior to gilt loin due to its high water-holding capacity.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.22-22
• /
• 2020

너도개미자리는 석죽과의 다년생 초본류로 낭림산 이북으로부터 백두산까지 분포하며 고지대에 자생한다. 7~10월에 흰색의 꽃이 개화하고 종자는 달걀모양으로 표면은 밋밋하다. 본 연구는 지피용으로 사용할 너도개미자리의 분화재배 시 적정 추비, 차광 및 적심 등의 처리 정도를 알아보고자 수행하였다. 재배방법의 확립을 위하여 유용식물증식센터에서 종자를 분양받아 2019년 4월 19일에 트레이에 파종하여 충북대학교 유리온실에서 육묘한 유묘를 7월 4일에 정식하여 실험재료로 사용하였으며, 9월 24일까지 약 11주 동안 재배하였다. 공통 조건은 비닐 포트 3치(7×7cm)에 원예상토를 충진하고 200구 트레이에 셀당 1립씩 파종하여 생산된 1셀을 정식하였다. 추비, 차광, 적심 등은 무처리로 수행하였다. 추비실험은 hyponex 하이그레이드(N-P-K, 7-10-6)를 0, 500, 1000, 2000mg·L^-1의 농도로 엽면시비 하였고, 차광 실험은 0, 35, 55, 75% 차광막을 이용하였으며, 적심은 무적심과 재배 4주차의 1회적심 처리로 구분하였다. 연구의 결과, 너도개미자리는 추비처리 농도가 증가할수록 생육도 증가하는 경향이었으나, 유의성은 확인할 수 없었다. 유의적인 차이는 없었지만 2000mg·L^-1 처리구에서 지상부 및 지하부의 생체중이 가장 무거운 결과를 보였다. 차광처리 별로는 무차광 조건에서 생육이 왕성한 결과를 보였고, 차광률의 증가는 생육을 점차 억제하는 경향이었다. 개화율도 무차광에서 가장 높았으며, 다음으로 35% 차광 순이었고, 55와 75% 차광에서는 개화가 진행되지 않았다. 너도개미자리에 적심처리는 초장과 측지수의 발생을 억제하였고, 개화도 지연되는 경향을 보였다. 결론적으로 너도개미자리의 지피용 재배시 광이 충분한 에 배치하여 재배하는 것이 효과적이다. 추비는 Hyponex 하이그레이드를 2000mg·L^-1의 농도를 처리하는 것이 생육에 유리하며, 적심은 하지 않는 것이 효과적인 재배방법인 것으로 판단된다.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.121-131
• /
• 2004

Removal efficiencies of soil washing and soil improvement processes to remediate farmland soils and stream deposits around Goro abandoned mine were investigated with batch and column experiments. For As-contaminated farm-land soils around Goro mine, batch tests to quantify As extraction rate from contaminated soils and lime treated contaminated soils were performed. The contaminated soil mixed with lime decreased As extraction rate less than one fourth, suggesting that the soil improvement method mixed with lime dramatically decrease As extraction rate. A storage dam will be constructed in the lower part of the main stream connected to Goro abandoned mine and the amount of As extracted from the bottom soils of reservoir could be the main source to contaminate water of reservoir. The decrease of As extraction amount from the bottom in reservoir, caused by the application of the soil improvement method was investigated from the physically simulated column experiment and results showed that As extraction rate decreased to one forty when 1％ lime mixed soil improvement was applied to contaminated soils. For contaminated stream deposits connected Goro mine, the removal efficiency of the soil washing method was investigated with batch experiments. Hydrochloric acid, citric acid, acetic acid and distilled water were used as soil washing solution and 0.01, 0.05, 0.1, 0.5, 1.0 N of washing solution were applied to extract As. When washing with 0.05 N of hydrochloric acid or citric acid, more than 99.9% of As was removed from stream deposits, suggesting that As contaminated stream deposits around Goro mine be successfully remediated with the soil washing process. Total volumes of contaminated soils and deposits needed for remediation were calculated based on three different reme-diation target concentrations and the operation cost of soil washing for calculated soil volumes was estimated. Results from this research could be directly used to make a comprehensive countermeasure to remediate contaminated area around Goro mine and also many contaminated areas similar to this research area.

• Economic and Environmental Geology
• /
• v.53 no.5
• /
• pp.529-542
• /
• 2020

The cesium (Cs) sorption characteristics of a bead-type polysulfone carrier contained HNO₃-treated bamboo charcoal (3 - 5 mm in diameter) in water system were investigated and its Cs removal efficiency as an adsorbent from water was also identified by various laboratory experiments. From the results of batch sorption experiments, the bead-type polysulfone carrier with only 5% HNO₃-treated bamboo charcoal (P-5NBC) represented the high Cs removal efficiency of 57.8% for 1 hour sorption time. The Cs removal efficiency of P-5NBC in water after 24 hours reaction maintained > 69% at a wide range of pH and temperature conditions, attesting to its applicability under various water systems. Batch sorption experiments were repeated for P-5NBC coated with two cultivated microorganisms (Pseudomonas fluorescens and Bacillus drentensis), which were typical indigenous species inhabited in soil and groundwater. The Cs removal efficiency for two microorganisms coated polysulfone carrier (BP-5NBC) additionally increased by 19% and 18%, respectively, compared to that of only P-5NBC without microorganisms coated. The average Cs desorption rate of P-5NBC for 24 h was lower than 16%, showing the Cs was stably attached on HNO₃-treated bamboo charcoal in so much as its long-term use. The maximum Cs sorption capacity (q_m) of P-5NBC calculated from the Langmuir isotherm model study was 60.9 mg/g, which was much higher than those of other adsorbents from previous studies for 1 h sorption time. The results of continuous column experiments showed that the P-5NBC coated with microorganisms packed in the column maintained > 80% of the Cs removal efficiency during 100 pore volumes flushing. It suggested that only 14.7 g of P-5NBC (only 0.75 g of HNO₃ treated bamboo charcoal included) can successfully clean-up 7.2 L of Cs contaminated water (the initial Cs concentration: 1 mg/L; the effluent concentration: < 0.2 mg/L). The present results suggested that the Cs contaminated water can be successfully cleaned up by using a small amount of the polysulfone carrier with HNO₃-treated bamboo charcoal.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.491-500
• /
• 2015

Batch experiments were performed to determine the feasibility of the surfactant-enhanced soil washing process at various washing conditions for the Kuwait soil seriously contaminated with the crude oil. The soil was sampled at a dried oil pond in Kuwait and its average TPH concentration was 223,754 mg/kg, which was too high to apply the conventional remediation process. Nine commercialized non-ionic surfactants were used for the batch experiment to measure the surfactant solubility for the crude oil because it was reported that they have worked for the soil remediation. Among them, three surfactants having high crude oil solubility were used for the soil washing experiment. From the result of batch experiment, 5% TritonX-100 washing solution showed the highest TPH removal efficiency (67%) for the crude oil contaminated soil. However, because the residual TPH concentration in the washed soil was still higher than the clean-up level in Kuwait (10,000 mg/kg), the repeated soil washing was performed. After five washings with 2% surfactant solution, the cumulative TPH removal efficiency was higher than 96% and the residual TPH concentration in the soil went down below the clean-up level. To measure the desorption capacity of TritonX-100 remained in the soil after the soil washing, the silica beads and the soil were washed five times with 2% TritonX-100 surfactant solution and then they were washed again with distilled water to detach the surfactant adsorbed on beads or soil. After five washings with surfactant solution, 7.8% and 19.6% of the surfactant was adsorbed on beads and soil, respectively. When additionally washed with distilled water, most of the residual surfactant were detached from beads and only 4.3% of surfactant was remained in soil. From the results, it was investigated that the surfactant-enhanced soil washing process with TritonX-100, Tergitol S-15-7, and Tergitol S-15-9 has a great capability for the remediation of the Kuwait soil seriously contaminated by crude oil (more than 220,000 mg/kg).