• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.96-107
• /
• 2014

Korea Aerospace Research Institute has a plan to launch experimental lunar orbiter in 2017, and lunar orbiter and lander in 2020. In the mission planning phase, LOI(Lunar Orbit Insertion) maneuver strategy should be designed using finite burn model because on-board propulsion system of lunar orbiter in finite burn type. LOI maneuver plan and amount of required ${\Delta}V$ using finite burn model depend on the spacecraft attitude at burn, a type of propellant, thrust level and burn timing. This paper describes the LOI maneuver of lunar orbiter of foreign space agency and then comes up with the LOI maneuver plan of Korean lunar orbiter. Adequate thrust level and burn duration of Korean lunar orbiter also present by performing simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.129-138
• /
• 2021

Due to the active progress in space programs for various types of ground and space missions, the high agile spacecraft maneuverability is also required. To meet the requirement of the given space missions, the Control Moment Gyros (CMG) for the alternatives of the classical reaction wheels can release the attitude maneuverability restrictions. In addition, the angular rates of the spacecraft is constrained due to the limited actuator characteristics. In this paper, a sliding mode control technique for the attitude control of the spacecraft equipped with the pyramid type of CSCMG(Constant Speed CMG) is designed, and the stability of the control system is guaranteed by using the Lyapunov stability theory. Finally, the control law proposed is analyized by numertical simulations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.806-813
• /
• 2016

For satellite attitude control and maneuver, normally four reaction wheels are used through pyramid configuration. However, if satellite's moment of inertia is large or available reaction wheels' capability is small, we can consider using five reaction wheels. In this case, we should think the arrangement of wheels and their operation method. Active SAR satellite requires high agile maneuver about roll axis to achieve looking angle change. In this research, we study the operation method of five reaction wheels configuration for fast roll maneuver.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.529-536
• /
• 2020

Reaction Control System of the third stage of the Korean Space Launch Vehicle II conducts roll control and 3 axis control throughout third stage engine start, satellite separation, and collision and contamination avoidance maneuver. Reaction control system consumes its propellant in each thruster operation. Hence, loading of proper amount of the propellant is important for mission success. It is needed to have a rough estimation method of propellant consumption during the flight. In this paper, we developed a energy equation using pressure and temperature data which are acquired in the on-board reaction control system. We constructed a test system which is similar with the on-board reaction control system to verify the energy equation. Test results using deionized water were compared with estimated propellant consumption. We also conducted an error analysis of the energy equation. We also presented the propellant consumption result of a system level operation test.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.49-56
• /
• 2022

S-STEP is a small SAR satellite mission that monitors time-limited emergency targets and military anomalies in areas of interest, achieving the average revisit in less than 30 minutes by deploying a constellation of 32 satellites in low orbit at an altitude of 510 km. The mission operation mode of S-STEP is divided into normal mode, observation mode, communication mode, and orbit maintenance mode. Further,, the attitude control mode is subdivides into initial detumbling, sun pointing, target pointing, ground station pointing, and thrust direction maintenance. Based on the preliminary mission operational scenario and the satellite's characteristics, this study analyzed the attitude control performance during initial detumbling and observation modes. It verifies that each mode's attitude control accuracy requirements within the time allotted by the scenario of the S-STEP achieved.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.30-37
• /
• 2008

The ARS(Attitude Reference System) calculates an attitude of a vehicle using inertial angular rate sensors and acceleration sensors. The attitude error of ARS increases due to the integration of angular rate sensor output. To reduce the attitude error an acceleration of sensor is used similar to leveling method of INS(Inertial Navigation System). When an acceleration of vehicle is increased, it is difficult to calculate the attitude error using acceleration sensor output. In this paper the estimation method of acceleration due to the attitude error only is proposed. Two methods of the attitude calculation depending on vehicle dynamics and the integration method of these two methods are proposed. To verify its performance the monte carlo simulation is performed and shows that it bounds attitude error of ARS to reasonable level.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2009

In this paper, reorientation based on angular momentum exchange is applied for a bias momentum stabilized satellite, which is equipped with a spherical fuel tank, and the effect of liquid slosh on the attitude properties such as inertia tensor and angular rate is investigated. In order to represent the slosh motion of liquid an equivalent mechanical model is adopted and full nonlinear equations of motion for three-body system are derived. Computer simulations are performed for several cases, which use the viscosity of liquid and the center location of the tank as input parameters, mainly in order to observe how the viscosity of liquid and the center location of the tank influence the spacecraft’s attitude. The investigation includes observing time-variations of the inertia tensor, especially presence of components of product of inertia during the maneuver.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.293-293
• /
• 2004

최근 교통사고의 증가와 평균수명의 연장으로 인한 노인 인구의 급증으로 중추신경계의 기능에 손상을 초래하는 각종 질환들 즉 뇌졸중, 외상성 뇌손상, 뇌성마비 및 퇴행성 뇌질환 등이 더욱 많아지고 있다. 이러한 질환들은 뇌기능 장애로 인한 운동, 감각 및 인지능력 저하를 일으켜 보행과 일상생활 동작수행에 큰 장해를 초래하게 된다. 특히 보행능력의 장해는 일상생활 및 사회생활에 필요한 기동력을 제한하므로 결국 타인에 의존적이 되고 사회로부터 고립되는 심각한 기능장애를 일으키게 된다.(중략)

• Journal of Aerospace System Engineering
• /
• v.4 no.4
• /
• pp.37-43
• /
• 2010

Need for agile satellites increases for performing various mission due to increase of satellite image applications and users. This paper performs attitude maneuver analysis by using Satellite Tool Kit(STK) made by AGI. In order to automate the STK analysis process, a MATLAB program is developed to generate STK input data and to process STK output data. Five attitude maneuver modes are analyzed and attitude angle variation and required torques are calculated.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.176.2-176.2
• /
• 2012

다목적실용위성 3호의 태양전지판은 위성의 -Z축 방향에 고정되어 있는 방식으로 사용되고 있다. 이로 인해 위성이 임무수행을 위한 자세기동을 하게 되면 태양전지판의 태양입사각 변화에 따라 전력생산량이 변하게 되고 이를 예측하여 최대 방전률(DOD : Depth of Discharge)을 넘지 않는 제한조건 내에서 임무 계획을 수행해야 한다. 전력생산량 및 전력소비량을 예측하기 위해서는 전력 모의실험을 수행해야 하며 이를 위해 위성의 자세 및 위치정보, 임무를 고려한 Mission Profile, 태양입사각, 초기 방전률 값을 생성해야 한다. 본 논문은 태양입사각 계산을 위해 위성의 임무(영상 촬영, 지상국 교신)를 반영한 자세 및 위치 정보를 생성하고, 이 결과를 태양입사각 계산 로직에 적용하여 태양입사각을 생성한 결과를 정리하였다. 생성된 결과의 타당성을 검토하기 위해 상용 툴인 STK를 이용하여 비교를 수행하였다. 또한, 전력 모의실험에 사용된 Mission Profile은 위성 운용에 안정성을 높이며 복잡한 임무 시나리오에 적용이 용이하도록 운용 Margin을 고려하여 생성하였다. 본 논문에서 제시한 방안을 실제 수행된 임무 시나리오에 적용하여 전력 모의실험을 수행하였으며, 그 결과를 임무 수행 후 획득된 위성 Telemetry를 이용한 실측값과 비교하여 전력 모의 실험 결과에 대한 타당성을 검증하였다. 실제 초기 운영결과 제한된 전력 허용 범위 내에서 적용이 가능함을 확인할 수 있었다.