• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.49-53
• /
• 1995

The tea red spider mite has recently outbroken as the major pest of tea at tea plantation area in southern part of Korea. This study was carried out to investigate some development of the tea red spider mite. The results were summarized as follows: 1. The body length and width of adult female and male were 0.40mm and 0.22mm, and 0.31mm and 0.20mm, respectively. 2. Durations of immature stage of females were 24.8 days at $16^{\circ}C$, 17.0 days at $20^{\circ}C$, 11.0 days at $24^{\circ}C$, 8.2 days at $28^{\circ}C$, and 6.7 days at $32^{\circ}C$. 3. The average longevities of female of the tea red spider mite were 31.5 days at $16^{\circ}C$, 13.4 days at $20^{\circ}C$, 8.4 days at $24^{\circ}C$, 7.8 days at $28^{\circ}C$, and 5.8 days at $32^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.22 no.4
• /
• pp.130-135
• /
• 2012

One prototype product of clip-type pulsimeter equipped with magnetic field sensing semiconductor Hall device after one permanent magnet attached "Chwan" position in center of a radial artery was developed. The clip-pulsimeter was composed of the hard ware system measuring to voltage signals. To measure the blood velocity, the radial artery pulsimeter is simultaneously connected the PPG (photoplethysmograph). Analysis and comparison of two pulse waves data has done obtained from a clinical test of forty subjects of 20 ages. The value of a blood velocity simultaneously measured from a radial artery puls wave and PPG is an average value of 0.8m/s. The usage of this research results is possible to store the biomedical signals for health care.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.177-182
• /
• 1999

사용한 보수.보강재, Rod, Fabric, Strand 형상을 콘크리트 구조물등에 보강재로 사용되어왔다. 이 재료는 해양환경하에서 내식성과 내구성을 갖는 철근및 철골대체용 복합소재와 초고층 경량 연속섬유보강 시멘트 복합재료는 탄소섬유, 아라미드섬유, 유리섬유등의 쉬트(sheet)형상을 신건재, 비자성, 비전도성, 전파차폐용 재료등에 사용할수있다. 그러나 FRP Rod를 내식성이 요구되는 철근 및 철골대체재로 사용할 경우에는 폴리머 매트릭스의 열화, 섬유와 폴리머간 계면 접착강도의 한계, 화재시 내화성, 보강재의 인발성등의 단점들을 갖고있다[1]. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.241-241
• /
• 2004

프린팅 기법은 크게 젯팅(Jetting) 기법과 코팅(Coating) 기법으로 나눌 수 있는데, 이중 젯팅 기법은 액체 상태의 재료를 노즐을 통하여 분사하는 기법을 말하며, 그 방식으로는 전하제어형, 확산형, 자성 잉크형 등의 연속 방식, 피에조형, 전기열 변환형, 방전형, 고체잉크형, 정전흡입형 등의 DOD 방식, 잉크 미스트형, 스프레이형 등의 기타 방식으로 나누어 볼 수 있다. 젯팅 공정을 이용하여 폴리머 계열을 2차원 흑은 3차원 형상으로 제작하는 것은, 기존의 잉크젯 분사시스템을 수정 보완하는 것으로도 기술적으로 가능하다.(중략)

• 한국해양학회지
• /
• v.26 no.2
• /
• pp.117-132
• /
• 1991

Marine total magnetic intensity over the southern part of the Ulleung Basin and geomagnetic data measured at a land base station are analyzed. Fourteen days observation of geomagnetic field at a fixed on-land base station showed how the geomagnetic field around the study area behaves. geomagnetic data at the base station can also be used as correction data for a diurnal variation. Magnetic anomalies in the study area do not reflect an effect of sea bottom topography but mainly subsurface basement. The southern part of the Ulleung Basin can be devided into two zones according to a different anomaly pattern; along the coastal shelves the isolated anomalies with a short wave and a strong amplitude are dominant, and toward the open sea the anomalies become much more subdued. The high anomaly zone adjoined to land is interpreted to be caused by granitic intrusives or volcanic rocks, and the weak anomaly zone to the outer sea to be arisen from an existence of deep basement. A spectrum analysis is applied to estimate magnetic basement depths from three anomaly profiles with a long period and a weak amplitude toward the outer sea. The calculated depths are 7.0km, 5.0km, and 2.6km respectively from outer profile. The basement might be correlated with the mixed layer of tuff, basalt, and sediment, which had been defined as L-2 layer in the Yamato basin and the Japan Basin.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.73-89
• /
• 2012

As the environment surrounding ports is rapidly changing and ports competition in Southeast Asia has become more severe to secure cargo volumes, ports strive to enhance their competitiveness by improving the efficiency of operations. The operational efficiency of ports, plays a crucial role to improve a nation's. This study aims to analyze the efficiency of container port and its determinants during over five year(2006 to 2010) period using DEA-O and Tobit regression respectively. The results show that firstly, Gamman is the most efficient container terminal, followed by New Gamman container terminal and Hutchison Busan container terminal. Secondly, it is notable that the efficiency of Busan Newport is dramatically increasing, and finally, the yard productivity of the container port is only influencing determinant of all.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.178-191
• /
• 1993

The electromagnetic filter has been recognized as a technological replacement for the conventional filtration systems of the nuclear power plant coolant. But, as of now there are neither clear understandings of the phenomena occurring in the electromagnetic filter nor the general theoretical analyses. These facts make the application or the electromagnetic filter to the real systems a little risky, and therefore it has not been commercialized although it shows excellent performances in such situations as the plant abnormality, where the conventional filters usually fail. This experimental study of the low power electromagnetic filter aims at the clarification of the general characteristics under varying operational parameters. Since the detailed characteristics may differ from one electromagnetic filter to another, they are considered secondary. The impurities applied are the highly magnetic magnetite (Fe$_3$O$_4$) and the diamagnetic cuprous oxide (Cu$_2$O). The empirical equations are derived from the experimental data by the regressional analyses. They are classified of three types : Efficiencies vs. Time, Efficiencies vs. Load, and Load vs. Time. The characteristics of the electromagnetic filter observed in this experiment agreed well with other related works in many aspects. Especially in this study, some assumptions and discussions including the physical deposition are combined for the explanations of the filter characteristics found in our and other experimental works.

• Journal of Environmental Impact Assessment
• /
• v.29 no.4
• /
• pp.252-271
• /
• 2020

In this study, we investigated physical and chemical properties such as grain size, heavy metal pollution, magnetic properties, and their environmental impacts of road dusts (RD) collected from 14 sampling points in Daebul industrial Complex. Heavy metal concentrations in RD were in the order of Fe>Zn>Cu>Pb>Cr>Ni>As>Cd>Hg, and this pollution pattern was related to major industries and traffic activities in this area. The results of the correlation analysis between heavy metal elements and particle size in RD showed that Fe and all of analyzed heavy metals had a significant correlation with each other and metal concentrations had a significantly negative correlation (p<0.05). However, due to the input of large metal particles some heavy metal concentrations in the particle fraction of >1000 ㎛ were highest. Pollution load per unit area of this fraction was the highest among the grain size fractions. Cr, Ni, Cu, Zn, Cd, Pb levels in RD decreased and the levels of Cr, Ni, Cu, Zn, Cd, and Pb were reduced to 85 (As) -22 (Ni)% of the whole after removal of MFs fraction from RD. The mean heavy metal levels in the study area did not exceed the soil contamination guide value of Korea, indicating that heavy metal levels in RD were not a concern. However, at some sampling points, Zn concentrations were exceeded the soil contamination guide value for the 3rd areas of Korea and this result indicated that further studies of the impact of RD on the surrounding environment through re-suspension or non-point pollution, and of effective management methods are required.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.1
• /
• pp.35-43
• /
• 2000

The slope gradient of the Korean Peninsula was analyzed by using DEM(DTED level 1). The Peninsula has high percentages of gentle slopes. But low plains and very steep slope regions are scarcely distributed in the Peninsula. Altitude lower than 150m areas are composed of plains and undulated plains. The steepest and most rugged topographies are observed in the range of altitude from 500m to 1,000m areas. The areas of altitude greater than 1,000m show plateau landscapes. By overlapping digital geology maps and the gradient grade maps, We revealed the characteristics of slope regions by geological districts. High latitude with steep slope are well developed in the geological districts of granitic gneiss(ARgr) and gneiss($PR_1$) of the Pre-Cambrian, sandstone of the Paleozoic era(P-T), and sedimentary rocks of the Mesozoic era($J_2$). Low altitude with gentle slope areas are representative in the districts of granite of the Mesozoic era($Jgr_1$), the Cretaceous sedimentary rocks of the Mesozoic era($K_1$, $K_2$) and the Cenozoic strata(N). Basalt extruded the Quaternary($Q_1$) are observed in the areas of very gentle slope but greater than 1,000m altitude.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.19-35
• /
• 2001

Outlines for plasma $estradiol-17\beta$, components, electrophoretic patterns, and ultrastructural changes were obtained in female rainbow trout (Oncorhynchus mykiss) during the seasonal reproductive cycles. Plasma $estradiol-17\beta$ under the natural conditions, exhibited distinct seasonal variation, peaking very late in vitellogenic season during September, decreasing gradually the halt of spawning in December, and ultimately falling during the early stages of seasonal ovarian recrudescence in February and March. This change in $estradiol-17\beta$ appeared to stimulate vitellogenin production as evidenced by increases in plasma calcium, phosphorus, glucose, albumin and total protein levels. The electrophoretic patterns of late maturing or spawning oocytes were stained more intensively than those of late perinucleolus oocytes (molecular weights of approximately 70,000 and 200,000). Two protein bands were found in the SDS-PAGE separation, coincident with the $estradiol-17\beta$ hormone peak. Gonadosomatic indices (GSI) significantly increased from October to January, and showed the highest peak in January, coinciding with the numerically abrupt increase of ripe ova in female. A positive correlation (r=0.701, p<0.01) was established between plasma $estradiol-17\beta$ levels and the gonadosomatic index during the prespawning. The highest level of hepatosomatic index (HSI) observed in December. During the breeding season (December), the gonadotropes were large and filled with GTH-containing inclusions such as granules and globules. The vitellogenic phase began as late perinurleolus oocytes became transformed into early maturing oocytes through the accumulation of yolk, and oocytes reached the late maturing stages as the ooplasm was completely packed with yolk. Marked ultrastructural changed in the granulosa cells during nuclear migration involve the dilation of the rough endoplasmic reticulum and the appearance of the rod-shaped mitochondria with tubular cristae. Microvilli (finger-like projections), from the zona radiata and from the oocyte grew, and made contact with each other in the pore canals of the zona radials during vitellogenesis, but were withdrawn as the zona radiata became more compact and devoid of pore canals during oocyte maturation. The zona radiata grew to a tripartite structure such as an outer thin homogeneous layer, and two inner thick helicoidal layers (zona radials interna and zona radiata externa). Under the normal conditions, the ovarian follicle influenced the histological development and periodical secretion of the hormones , sufficient for a oogenesis and gonadal steroid production.