• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.410-414
• /
• 2009

홍수 유량 측정에 주로 활용되는 봉부자법은 신속하고 간편하게 유량을 측정할 수 있지만, 부자의 유하 경로를 정확하게 알 수 없으므로 가정된 직선을 따라 유하하지 않을 경우 유속과 단면적 계산에 불확실성이 다소 크게 발생하는 단점이 있다. 또한 측정에 소요되는 시간이 짧지만, 대개 현장에서 유량 계산이 바로 이루어지지 못하므로 측정 유량의 적절성을 충분히 평가하지 못한다. 본 연구에서는 봉부자법의 장점은 살리고 단점을 개선할 수 있는 전자부자 시스템을 개발하고 이를 이용하여 유량을 산정하였다. 개발된 전자부자 시스템은 GPS에 의해 유하경로를 획득하여 RF 통신을 통해 실시간으로 기지국에 정보를 전송한다. 기지국은 3개 RF 채널을 통해 최대 15개의 전자부자의 위치 정보를 동시에 수집하며, 각 전자부자의 유하경로와 미리 측량한 단면 자료를 결합하여 측정과 동시에 자동으로 유속을 계산한다. 이렇게 계산된 유속은 지리정보와 결합되어 있으므로 하천의 평면 2차원적 흐름 특성을 나타내는데 활용될 수 있으며, 나아가 미리 측량된 단면 자료와 결합하여 측정과 동시에 즉각 유량이 얻어질 수 있다. 이러한 점에서 본 연구는 전자부자를 이용하여 현장에서 유속과 유량을 실측한 사례를 제시하고자 한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.87-94
• /
• 2004

In this paper, the experimental design of an intake system was studied using the two microphones method and the taguchi method. The transmission loss was utilized to represent the performance of noise reduction for the intake system which was estimated by measuring sound power at inlet and outlet with two microphones, respectively. Two microphones method used in this paper was followed by wave decomposition theory. The robust designing parameters of an intake system were extracted by adapting a cost function with the taguchi method, which optimized the process. Finally the effectiveness of the propose method was validated with the experimental data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.114-119
• /
• 2003

In this paper, the experimental design of an intake system was studied using the two microphones method and the taguchi method. The transmission loss was utilized to represent the performance of noise reduction for the intake system which was estimated by measuring sound power at inlet and outlet with two microphones, respectively. Two microphones method used in this paper was followed by wave decomposition theory The robust designing parameters of an intake system were extracted by adapting a cost function with the taguchi method, which optimized the process. Finally the effectiveness of the propose method was validated with the experimental data.

• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.18-27
• /
• 2000

There is a acupuncture method which make a difference according to the four seasons, according to body region or depth in skin. We call it Acupuncture follow the four seasons(四時刺法). In several chapters of Huangdineijing(黃帝內經) introduced Acupuncture follow the four seasons. Acupuncture follow the four seasons has two kinds of acupuncture method that is to acupuncture at body region and to acupuncture at five Su points(五兪穴). To use five Su points(五兪穴) according to Yongchu(靈樞) disagree with Nanjing(難經). In Yongchu(靈樞), the five phases property disagree with five Su points(五兪穴), but in Nanjing(難經) the five phases property agree with five Su points(五兪穴). Even if we can acupuncture the same point, there will be the different effect according as what is the purpose of doing acupuncture, and when we do acupuncture. That is to say, we can use apucupuncture for the purpose of prevention in Yongchu(靈樞), and for the purpose of healing the disease in Nanjing(難經). Therefore, because we select the point on the base of meridian Kis origin which spring out, we have to acupuncture Chong point(井穴) in winter according to Yongchu(靈樞). Because we select the point on the base of meridian Kis origin which flowing, we have to acupuncture Chong point(井穴) in spring according to Nanjing(難經). And in the base of five phases' property, the purpose of selecting five Su points(五兪穴) is the prevention according to Yongchu(靈樞), and the healing according to Nanjing(難經). So even though we acupuncture the exactly same Chong point(井穴), we can expect the effect that acupuncture method supply Ki for liver in winter. and the effect that it extract pathogenic Ki(邪氣) from the liver in spring.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.269-280
• /
• 2005

We assigned points on surface of standard roughness profile by 0.1mm along the length and measured coordinates of points. Then, the lengths of profile were measured with different scales using modified divider method. The fractal dimensions and intercepts of slopes were determined by plotting the length vs scale in log-log scale. The fractal dimensions as well as intercepts of slopes show well correlation with joint roughness coefficients(JRC). However, multiplication of the kactal dimension by intercept show better correlation with IRC and we derived a new equation to estimate JRC from fractal dimension and intercept. The crossover length in which we can determine the correct fractal dimension was between 0.3-3.2mm. We measured joint roughness of 26 natural joints and calculated JRC using the equation suggested by Tse and Cruden(1979) and new equation derived by us. IRC values calculated by both equations are almost the same, indicating new equation is effective in measuring IRC.

• Journal of Korea Water Resources Association
• /
• v.43 no.12
• /
• pp.1039-1050
• /
• 2010

Relative accuracy of six discharge measurement methods-velocity-area method, rod-float method, ADCP moving-vessel method, ADCP fixed-vessel method, electromagnetic wave surface velocimeter (EWSV), LSPIV- is evaluated by comparing discharges measured by them with dam released discharges. Data from 39 times of concurrent discharge measurement campaigns are analyzed. Except the rod-float method, measured discharges show absolute errors less than 6.2% with dam discharges. When the four methods is evaluated by being compared with discharges measured with the conventional velocity-area method, discharges with electromagnetic wave surface velocimetry shows 7.35% of absolute errors and other three methods shows absolute errors less than 6%. The rod-float method, which shows large discrepancy compared with dam and velocity-area method, need complementary verification.

• Pediatric Infection and Vaccine
• /
• v.6 no.1
• /
• pp.101-106
• /
• 1999

Purpose : Tuberculosis, a major public health problem, is an important cause of childhood infectious diseases. To decrease the tuberculosis morbidity rate, BCG vaccination and chemoprophylaxis are performed. Recently 2TU PPD skin test was introduced as a diagnostic method for tuberculous infection. We studied the positive conversion rate of 2TU PPD test after percutaneous multiple puncture BCG vaccination. Methods : Four hundred seventy six infants from well baby clinic of Samsung Cheil Hospital were enrolled. They were immunized with percutaneous multiple puncture technique BCG(Japan BCG laboratory, Japan) at 1 month of age. Approximately 6 months later, tuberculin skin test using RT23 2TU PPD was performed. Induration size, family history of tuberculosis and number of BCG scars were evaluated. Induration greater than or equal to 5mm was defined as positive conversion. Results : Among 476 infants, 248(52.1%) were male and 228(47.9%) were female. PPD skin tests were performed $6.2{\pm}0.5$($mean{\pm}S.D.$) months after BCG vaccination. Mean induration size was $7.3{\pm}3.2mm$ and positive conversion rate was 85.5%. Total number of BCG scars was $15.5{\pm}3.2$. Conclusion : The seroconversion rate by 2TU PPD test after percutaneous multiple puncture BCG vaccination was high. But, more comparative studies with various age groups may be needed for 2TU PPD test used as diagnostic method of tuberculosis in the hospitals.

• 한국문화재보존과학회:학술대회논문집
• /
• 2003.09a
• /
• pp.89-93
• /
• 2003

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.65-70
• /
• 1998

Soil moisture measuring is important for irrigation scheduling of upland crops, estimation of evapotranspiration, and hydrologic modeling. Hence, the comparative study was implemented for the soil moisture measuring instruments, Neutron probe and TDR with soil sampling methods, and the result was represented.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.31-39
• /
• 1996