• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.41-53
• /
• 2018

In the traditional seismic processing, multiple reflections are treated as noise and therefore they are eliminated during data processing. Recently, however, many studies have begun to consider multiples as signals rather than noise for seismic imaging. Multiple reflections can illuminate an area where primary reflections are not able to cover, thus it is allowed that a smaller number of shots and receivers are used for imaging large areas. In order to verify this, surface-related multiples were used for reverse-time migration (RTM), and then we compared the results with conventional RTM images which are generated from primary reflections. To utilize multiples, we separated multiples from whole seismic data using surface-related multiple elimination (SRME) method. Numerical examples confirmed that the migration using multiples can image wider area than the conventional migration, particularly in the shallow subsurface layers. In addition, the migration of multiples could eliminate the acquisition footprints.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.6
• /
• pp.319-331
• /
• 2016

This study explores the signal characteristics for different averaging intervals and defines representative verticies for each observatory by criterion of percent rate and variance. The shorter averaging interval shows the higher frequency variation, though the lower percent rate. In the tidal currents, we could hardly find the differences between 60-minute and 20-minute averaging. The newly defined criterion improves reliability of HF-radar data compared with the present reference which deselects the half by percent rate.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.119-124
• /
• 2004

LiDAR 자료를 이용한 지형 및 공간 정보 자료를 구축하기 위해서는 LiDAR 자료의 오차 보정, 건물영역 및 지면 분리, 건물 및 지형의 재구성 등의 과정이 필요하다. 그 중에서 건물영역 분리 과정은 막대한 양의 LiDAR 자료에 대한 직, 간접적인 처리를 필요로 하며 결과물의 품질에도 큰 영향을 미친다. 본 연구에서는 LiDAR 자료로부터 건물 영역을 분리해 내기 위하여 LiDAR 원 자료를 그대로 활용하는 방식을 제안하였다. 항공레이저측량은 스캔라인을 따라 취득되는 포인트정보를 순서대로 저장하여 제공하므로 LiDAR 자료로부터 연속적으로 입력되는 포인트들은 서로 인접할 가능성이 높다. 이와 같은 특성을 이용하여 유사한 고도 값을 갖는 인접 포인트들로 클래스를 형성하고 새로운 포인트가 속할 클래스를 검색하여 편입시킴으로써 건물영역을 분리해 낸다. 아울러 각 건물 클래스에 대한 레이블링도 자동적으로 수행하며 새로운 포인트가 편입될 클래스를 검색하는 방법에 있어서도, 클래스의 검색 순서와 클래스의 자료 구조를 효율적으로 운용함으로써 성능 향상을 도모하였다.

• Geophysics and Geophysical Exploration
• /
• v.26 no.2
• /
• pp.52-61
• /
• 2023

The use of ultra-high-resolution (UHR) seismic surveys to preceisly characterize coastal and shallow structures have increased recently. UHR surveys derive a spatial resolution of 3.125 m using a high-frequency source (80 Hz to 1 kHz). A digital streamer system is an essential module for acquiring high-quality UHR seismic data. Localization studies have focused on reducing purchase costs and decreasing maintenance periods. Basic performance verification and application tests of the developed streamer have been successfully carried out; however, a comparative analysis with the existing benchmark model was not conducted. In this study, we characterized data obtained by using a developed streamer and a benchmark model simultaneously. Tamhae 2 and auxiliary equipment of the Korea Institute of Geoscience and Mineral Resources were used to acquire 2D seismic data, which were analyzed from different perspectives. The data obtained using the developed streamer differed in sensitivity from that obtained using benchmark model by frequency band.However, both type of data had a very high level of similarity in the range corresponding to the central frequency band of the seismic source. However, in the low frequency band below 60 Hz, data obtained using the developed streamer showed a lower signal-to-noise ratio than that obtained using the benchmark model.This lower ratio can hinder the quality in data acquisition using low-frequency sound sources such as cluster air guns. Three causes for this difference were, and streamers developed in future will attempt to reflect on these improvements.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.229-240
• /
• 2019

3D geo-spatial model have been widely used in the field of Civil Engineering, Medical, Computer Graphics, Urban Management and many other. Especially, the demand for high quality 3D spatial information such as precise road map construction has explosively increased, MMS and UAV techniques have been actively used to acquire them more easily and conveniently in surveying and geo-spatial field. However, in order to perform 3D modeling by integrating the two data set from MMS and UAV, its so needed an proper registration method is required to efficiently correct the difference between the raw data acquisition sensor, the point cloud data generation method, and the observation accuracy occurred when the two techniques are applied. In this study, we obtained UAV point colud data in Yeouido area as the study area in order to determine the automatic registration performance between MMS and UAV point cloud data using ICP(Iterative Closet Point) method. MMS observations was then performed in the study area by dividing 4 zones according to the level of overlap ratio and observation noise with based on UAV data. After we manually registered the MMS data to the UAV data, then compared the results which automatic registered using ICP method. In conclusion, the higher the overlap ratio and the lower the noise level, can bring the more accurate results in the automatic registration using ICP method.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.289-297
• /
• 2011

Chirp sub-bottom profilers (SBP) data are comparatively higher-resolution data than other seismic data and it's raw signal can be used as a final section after conducting basic filtering. However, Chirp SBP signal has possibility to include various noise in high-frequency band and to provide the distorted image for the complex geological structure in time domain. This study aims at the goal to establish the workflow of Chirp SBP data processing for enhanced image and to analyze the proper parameters for the domestic continental shelf. After pre-processing, we include the dynamic S/N filtering to eliminate the high-frequency component noise, the dip scan stack to enhance the continuity of reflection events and finally the post-stack depth migration to correct the distorted structure on the time domain sections. We demonstrated our workflow on the data acquired by domestically widely used equipments and then we could obtain the improved seismic sections of depth domain. This workflow seems to provide the proper seismic section to interpretation when applied to data processing of Chirp SBP that are largely used for domestic acquisition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.744-749
• /
• 2018

Informatization and visualization technology for real space is a key technology for construction of geospatial information. Three-dimensional (3D) modeling is a method of constructing geospatial information from data measured by various methods. The 3D laser scanner has been mainly used as a method for acquiring digital elevation data. On the other hand, the unmanned aerial vehicle (UAV), which has been attracting attention as a promising technology of the fourth industrial revolution, has been evaluated as a technology for obtaining fast geospatial information, and various studies are being carried out. However, there is a lack of evaluation on the quantitative work efficiency and data accuracy of the data construction technology for 3D geospatial modeling. In this study, various analyses were carried out on the characteristics, work processes, and accuracy of point cloud data acquired by a 3D laser scanner and an unmanned aerial vehicle. The 3D laser scanner and UAV were used to generate digital elevation data of the study area, and the characteristics were analyzed. Through evaluation of the accuracy, it was confirmed that digital elevation data from a 3D laser scanner and UAV show accuracy within a 10 cm maximum, and it is suggested that it can be used for spatial information construction. In the future, collecting 3D elevation data from a 3D laser scanner and UAV is expected to be utilized as an efficient geospatial information-construction method.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.711-722
• /
• 2020

The purpose of this study was to investigate the effectiveness of utilization level and to propose the improvement related in obtaining qualification for senior sports instructors. The population of this study was participants who took the course of the general course and special course Training Program for Sports Instructors for senior in JeollaNam-do from 2015 to 2017. A total of 113 of them answered the survey. The data process of this study was used by the IBM SPSS Statistics 25.0 program, and frequency analysis was conducted. The results of this study are follows. First, What was your situation when they took the qualifications program of sports instructor for senior, the largest number of answer were 'working in the sports field'. Most respondents answered that the reason for acquisition was to have various abilities. Second, The qualification of sports instructor for senior helped person get a job but did not help with promotions or wage increases. the largest number of answer to the reason were'the lack of benefits from qualification'. At the national level, the system of sport instructor qualification for senior must be an important system for preparing for future social problems and maintaining a healthy society. In order to be effective, however, the training program should be strengthened for the senior and provide professional experiences.

• 재활복지
• /
• v.22 no.1
• /
• pp.27-49
• /
• 2018

The purpose of this study was to analyze the relationship between social interaction, role acquisition, and self-identity of people with physical disabilities participating in daily sports. In order to accomplish the purpose of this study, people with physical disabilities residing in Busan, Gyeongnam, and Gyeongbuk were set as a population. Among them, 384 people with physical disabilities participating in daily sports were sampled using convenience sampling. Data were analyzed by frequency analysis, exploratory factor analysis, reliability analysis, multiple regression analysis, and simple regression analysis using the SPSS 23.0 program. The results were as follows. As a result of analyzing the effects of participation level of daily sports for people with physical disabilities on social interaction, role acquisition, and self-identity, first, participation period had a significant effect on ego-identity. Second, participation time did not have a statistically significant effect on social interaction, role acquisition, and self-identity. Third, participation frequency had a significant effect on social interaction, role acquisition, and self-identity. In addition, social interaction, role acquisition, and self-identity showed a statistically significant correlation with positive effects as a result of analyzing the relationship between social interaction, role acquisition, and self-identity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.426-430
• /
• 2009

본 연구에서는 ADCP 측정자료를 효율적으로 활용할 수 있도록 ADCP 이동측정법 자료의 후처리 프로그램을 개발하였다. 먼저, 측정된 ensemble과 방위별 유속으로 표시되던 단면유속분포를 한 눈에 알아볼 수 있도록 좌표를 정리하고 주흐름방향 유속을 출력하는 등, Sontek과 RDI 자료 취득 소프트웨어의 ascii 파일을 사용자가 쉽게 알아보고 가공할 수 있도록 변형하였다. 또한, 기존 ADCP 사용과 관련하여 발표된 screening 및 smoothing 기법을 적용하여 유효한 유속자료를 선별하고 단면의 평균 흐름에 근접한 유속자료를 제공하도록 하였다. 멱함수를 이용한 외삽으로 측정불가역의 유속 및 유량을 추정하였으며, 총 53개 측정자료의 유량을 추정한 결과 ADCP 소프트웨어가 제공하는 유량과 평균 1.33 %의 오차를 보였다. 마지막으로, 정리된 ADCP 자료로부터 하천의 주요 수리학적 특성을 추정하도록 하여 하천단면을 횡단하는 간단한 ADCP 측정만으로도 많은 시간과 노력을 들여 측정하던 하천의 특성을 신속히 파악할 수 있도록 하였다.