• Proceedings of the KSEG Conference
• /
• 2002.04a
• /
• pp.285-290
• /
• 2002

조사지역은 전라남도 함평군 함평읍으로부터 남쪽으로 엄다면 화양리, 학야리, 성천리 일대에 발달한 충적층으로서. 이 지역에는 남서-북동방향으로 광주단층이 통과하고 있는 것으로 추정된다. 충적층 하부에 발달한 단층을 포함한 대규모 파쇄대 파악에는 지표지질조사로서 한계가 있다. 따라서 이 연구에서는 물리탐사방법을 적용하여 충적층 하부의 대규모 파쇄대의 방향과 연장성을 파악하고자 하였으며, 사용된 물리탐사법은 전기비저항 2차원탐사, 전자탐사 그리고 자력탐사이다. 전기비저항 탐사결과 충적층 내에서 남북방향의 연장성을 갖는 전기비저항 이상대가 파악되었으나, 자력탐사와 전자탐사의 측정자료에는 이 이상대에대한 반응을 관찰할 수 없었다. 이는 전자탐사의 경우, 가탐심도가 매우 작은 EM31을 사용하였고, 또한 자력탐사는 주변 지질매체 간의 대자율 차이가 없는 것에 기인한 것으로 판단된다. 따라서 향후 지하심부의 탐사를 위해 전자탐사법중 TEM 탐사를 실시할 계획이며, 또한 낮은 전기비저항 이상대의 연장성을 정확히 파악하기 위하여 기 측정된 전기비저항 탐사 측선 사이를 탐사할 예정이다.

• Geophysics and Geophysical Exploration
• /
• v.23 no.3
• /
• pp.208-214
• /
• 2020

In this study, we have developed a drone magnetic exploration system (proto-type) using a fluxgate magnetic sensor. Hardware of the system consists of a fluxgate magnetometer, an inertial measurement unit (IMU), a GPS, and a communication module. And we have developed monitoring software, which enables it to transmit the measured data to the ground control system (GCS) in real time. The measured magnetic data are finally saved as 1 Hz data after passing through a notch filter and a band-pass filter. For verification of this system, a preliminary test was conducted to check the magnetic responses of a magnetic object first, then the field test was carried out in two iron mines. We tested the developed system on the field test in Pocheon, Gyeonggi and Jeongseon, Gangwon. The magnetic data from the developed drone system was very similar to those from unmanned airship system developed by Korea Institute of Geoscience and Mineral Resources (KIGAM). As a result, preliminary experiment and field test have demonstrated that this system is applicable for outdoor aeromagnetic exploration. It requires more studies to improve filter function and instrument performance to minimize noise in the future.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.131-138
• /
• 2013

We developed a method for inverting magnetic data to image 2D susceptibility models. The major difficulty in the inversion of the potential data is the nonuniqueness. Furthermore, generally the number of inversion blocks are greater than the number of the magnetic data available, and thus the magnetic inversion leads to under-determined problem, which aggravates the nonuniqueness. When the magnetic data were inverted by the general least-squares method, the anomalous susceptibility would be concentrated near the surface in the inverted section. To overcome this nonuniqueness problem, we propose a new resolution model constraint that is calculated from the parameter resolution. The model constraint imposes large penalty on the model parameter with good resolution, on the other hand small penalty on the model parameter with poor resolution. Thus, the deep-seated model parameter, generally having poor resolution, can be effectively resolved. The developed inversion algorithm is applied to the inversion of the synthetic data for typical models of magnetic anomalies and is tested on real airborne data obtained at the Okcheon belt of Korea.

• The Journal of Engineering Geology
• /
• v.2 no.2
• /
• pp.113-130
• /
• 1992

Groundwater in crystalline basement is controlled primarily by tectonic fractures. It is evident that the delineation of the heavily faulted area and/or fractures deeply developped should be considerable value in deep-seated low enthalphy geothermal water. Electrical and electromagnetic methods have effectively been employed to map hydraulic faults and shear zones for groundwater exploration. In this study VLi; dipoledipole resistivity, controlled source audio~frequency magneto-telluric(CSAMT) and magnetic methods were applied in the Bomun resort area, adjacent to Kyongju city, southeastern part of Korea. The integrated geophysical tools employed in this experiment can be manifested themselves as: 1. Magnetic high for granite intrusions which is more favorable for geothermal gradient increase in depth. 2. VLF cross-over trends for mapping linear shallow conductive fractures and shear zones. 3. Dipole-dipole resistivity distributions for the deep-seated(less than 500m in depth) fractures and shear zones. The dipole-dipole resistivity field data were inverted to the true resistivity distribution with two-dimensional automatic inversion program based on the finite-difference method. 4. CSAMT provides an efficient way of delineating fractures and fault zones if the depth is greater than about 500m.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.119-130
• /
• 2013

We developed a method for inverting magnetic data to recover the 3D susceptibility models. The major difficulty in the inversion of the potential data is the non-uniqueness and the vast computing time. The insufficient number of data compared with that of inversion blocks intensifies the non-uniqueness problem. Furthermore, there is poor depth resolution inherent in magnetic data. To overcome this non-uniqueness problem, we propose a resolution model constraint that imposes large penalty on the model parameter with good resolution; on the other hand, small penalty on the model parameter with poor resolution. Using this model constraint, the model parameter with a poor resolution can be effectively resolved. Moreover, the wavelet transform and parallel solving were introduced to save the computing time. Through the wavelet transform, a large system matrix was transformed to a sparse matrix and solved by a parallel linear equation solver. This procedure is able to enormously save the computing time for the 3D inversion of magnetic data. The developed inversion algorithm is applied to the inversion of the synthetic data for typical models of magnetic anomalies and real airborne data obtained at the Geumsan area of Korea.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.104-111
• /
• 2005

Dmitri Donskoi, the Russian cruiser launched in 1883, is known to have sunk near Ulleung Island (East Sea, Korea) on May 29, 1905, while it was participating in the Russo-Japanese War. In order to find this ship, information about its possible location was obtained from Russian and Japanese maritime historical records. The supposed location of the ship was identified, and we conducted a five-year geophysical survey from 1999 to 2003. A reconnaissance three-dimensional topographic survey of the sea floor was carried out using multi-beam echo sounder, marine magnetometer, and side-scan sonar. An anomalous body identified through the initial reconnaissance survey was identified by a detailed survey using a remotely operated vehicle, deep-sea camera, and the mini-submarine Pathfinder. Interpretation of the acquired data showed that the ship is hanging on the side of a channel, at the bottom of the sea 400 m below sea level. The location is about 2 km from Port Jeodong, Uleung Island. We discovered 152 mm naval guns and other war materiel still attached to the hull of the ship. In addition, the remnants of the steering gear and other machinery that were burnt during the final action were found near the hull. Strong magnetic fields, resulting from the presence of volcanic rocks in the survey area, affected the resolution of the magnetic data gathered; as a result, we could not locate the ship reliably using the magnetic method. Severe sea floor topography in the gully around the hull gave rise to diffuse reflections in the side-scan sonar data, and this prevented us from identifying the anomalous body with the side-scan sonar technique. However, the sea-floor image obtained from the multi-bean echo sounder was very useful in verifying the location of the ship.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.85-92
• /
• 2008

National Oceanographic Research Institute is carrying out an oceanographic survey for the entire sea areas around Korean Peninsula annually starting with the East Sea from 1996 by establishing a national oceanographic basic map survey plan for the sea areas under the jurisdiction of Korea, so this paper used the oceanographic geomagnetism data measured at the southern area of the Yellow Sea using 'Hae Yang 2000' in 1999, aiming at clarifying the cause of geomagnetic abnormality zone during the course of treating and analyzing the geomagnetic data. For treatment of magnetic data, we obtained electromagnetic force values and geomagnetic abnormality values around the investigated sea area through a process of searching and removal of bad data, correction of sensor positions, correction of magnetic field effects around the hull, correction of diurnal variation, normal correction, correction of cross point errors, etc. The electromagnetic force distribution around the investigated sea area was $49000\;{\sim}\;51600\;nT$, which is judged to be within the normal electromagnetic force intensity distribution range around the Yellow Sea. The isodynamic lines are distributed in Northeast-Southwest direction, and electromagnetic force values are increasing toward the northwest. The result of comparing the magnetic abnormality around the sea area among $124^{\circ}$ 49' 48" E, $35^{\circ}$ 10' 48" N $\sim$ $125^{\circ}$ 7' 48" E, and $35^{\circ}$ 33' 00" N sections with the elastic wave cross section and the result of modeling coincide well with the underground geological structure clarified from the existing elastic wave survey cross section. Therefore, it is judged that the distribution of magnetic force abnormality generally shows the effect pursuant to the distribution of the sedimentary basins in the Tertiary period and the bedrocks in the Cretaceous period which are well developed in the bottom of the sea.

• Journal of the Korean earth science society
• /
• v.31 no.7
• /
• pp.673-680
• /
• 2010

A steel pile often utilized to bear heavy loads of the upper sub-structure, e. g., bridge constructions and tall buildings. As the steel piles are driven in the underground, it is not easy to detect the depth of the existing pile foundation when there is no detailed foundation information available. However, accurate informations of the depths of piles becomes critical required when reinforcing the existing structures or constructing new ones at the adjacent stage to assure the safety of existing structures. In this study, we tested the applicability of the three components borehole fluxgate magnetometer for detecting the depths and locations of steel piles which are commonly used in civil engineering. Results showed that the information of location as well as the depth of steel piles could be obtained by using data from the three components borehole fluxgate magnetometer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1819-1823
• /
• 2005

Incorrect information on public sites can cause serious problem. One of relevant countermeasures against this problem is to detect of buried underground utilities in real time. Although there have been several method to detect of buried underground utilities, such as investigating of gravity and elastic wave and electric field, they have not been so efficient tools. Because it is too expensive and difficult to use. In this paper, magnetic sensors which could provide an easier and more efficient method are used to detect of buried underground utilities. Also fluxgate method of self detection are used. Input signal is used $1\~10kHz$ frequency. Filtering and signal processing of output signal are used labview software. After experiment, detection system of buried underground utilities which used magnetic shows possibility of precise detecting of laying object based on theorectical analysis for electromagnetic field.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.499-508
• /
• 2019

Based on the preliminary surveys for the occurrences of the Muwellut chrome-nickel mineralized zone ($800km^2$) in northwestern Myanmar, Bophivum area was selected as the detailed exploration area after considering data source, geological potential, metallogenic province, necessity of resource development on target mineral, exploration activity, grade, ore deposit type, nearby operating mine, infrastructure and exploration prediction effect. From 2013 to 2016, KIGAM and DGSE carried out geological and geochemical survey with 1:1,000 scale, magnetic survey(areal extent, $1.672km^2$), trench survey(19 trench, total length 392 m), pitting survey(18 pit, total depth 42.6m), exploration drilling(6holes 600m, 2015; 13holes 617.4m). We analyzed Cr and Ni contents of 77 drill cores with specific gravity in Yangon DGSE analytical center. Considering surface geological survey, geochemical exploration, magnetic survey, trench survey and drilling data, we divided Bophivum area into 8 blocks. Resource estimation are divided into measured and indicated resources. Measured resource is about 9,790t and indicated resource is about 12,080t with the average grade of Cr 11.8% and Ni 0.34%. In case of Bophivum area, if we develop by tying up Webula chrome mineralized zone in the south, it will be possible to upgrade the medium-scale mine. Geologically, the ophiolite belt are distributed in the western and eastern part in Myanmar. So, the exploration technology obtained from exploation in Bophivum area will be helpful to discover the hidden chromitite ore body in Myanmar ophiolite belt in the future.