• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.412-419
• /
• 2006

We design and fabricate an autostigmatic null lens system assembled in a fixed tube mount in order to evaluate the shape of an aluminum hyperbolic mirror with the diameter of 300 mm and the f-number of 1.98, which is fabricated by a high precision aspherical DTM (diamond turning machine). Also, we evaluate the degree of shape of the aspherical mirror by this autostigmatic null lens testing method. The autostigmatic null lens system assembling in a fixed tube mount has several advantages of light weight, good mechanical stability, etc. The permissible fabricating limits of null lenses and a mount are determined by considering various tolerances to assure the measurement reliability.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.111-117
• /
• 1990

The hydraulic line haulers are now widely used to haul the main line, but the other hauling operations are still done manually in most pot fisheries. The oval type hooks which are connected between the loops and the post are tested for basic capability by the universal tension meter in order to develop the automatic separating system. The pots attached to the oval type hooks are separated automatically from the loops while the oval type hooks are running through the trumpet separator with the side roller and the results are as follows: 1. The tension of the large oval hooks (ø3.1mm) for missing pots and the compressive load at the end of hooks by hand are about 60kg and 6kg, and range of tension for passing through the trumpet is 11~15kg. 2. Automatic separating ratio of the pots with the large oval hooks is about 99% when the trumpet separator is attached to front or rear of the side roller in the laboratory. 3. The separating ratio of the pot with the large oval hooks while hauling operation in the sea is about 97% when the trumpet separator is oriented on the port bulwark departed 2m from the side roller.

• Horticultural Science & Technology
• /
• v.17 no.3
• /
• pp.325-328
• /
• 1999

This experiment was conducted to investigate the effect of the automatic control of night temperature and day length on the flower bud initiation growth responses and yield of strawberries. Flower bud initiation was observed only 14 days after treatment in plants forced with automatic system but not in plants forced with traditional methods, and flower bud development was further progressed by an automatic system. In genernal, the crown diameter of runner plants derived from strawberries grown with the automatic system was smaller than those from the plants grown under hand-operated system and this tendency was clear in plants placed at middle and low position during forcing. The rate of transpiration was higher in plants treated with hand operated method but the content of chlorophyll was lower than those treated with the automatic system. Results indicated that automatic system has an advantage in stimulation of flower bud initiation and improving the quility of runner plants.

• Journal of the KSME
• /
• v.29 no.3
• /
• pp.294-305
• /
• 1989

소성가공 공정설계의 컴퓨터를 이용한 최적설계를 위하여 선결되어야 기술적 과제를 (i) 구성방 정식, (ii) 윤활 및 마찰조건, 그리고 (iii) 적응적 유한요소망 재구성법 등 3가지 분야로 대별하여 논의하였다. 적절히 선택된 마찰/구속조건 등 경계조건 (boundary condition) 과 적절한 유한 요소망의 구성을 통하여 최종제품의 형상을 만들어내기 위한 금형의 형상 등을 유한요소법으로 해석하여 공정설계상의 시행착오의 범위와 횟수를 줄일 수 있다(7,8). 또 하나의 예로서 자동 차의 자체 등 비교적 대형의 판재가공에서 펀치에 의한 본격적인 가공행정이 이루어지기 전에 판재 자체가 중력에 의하여 처지게 되는데 이러한 중력에 의한 피가공재의 초기 처짐은 최종제 품의 형상에 직접적인 영향을 주게 된다. 이 경우 기존의 유한요소 해석 기법을 사용하여 초 기처짐을 제어하기 위한 판재의 가공전 고정용 금형(binder wrap)의 최적설계를 훌륭히 수행할 수 있다. 이같이 현재의 유한요소 해석법은 많은 기술적 과제를 지니고 있으나 동시에 소성가 공의 컴퓨터 응용설계를 실현하기 위한 궁극적 도구로서 매우 큰 활용 잠재력을 지니고 있다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.118-124
• /
• 1990

The rope winder in addition to the line hauler was used for recoiling of the main line to the rope pond at the stern, however, catching the loops, evenly revoiling and arrangements of the loops were done manually by two men. The automatic loop catcher under the rope winder was consisted with the rotary lever, semicircle guide plates, transfer belt and swing rope receiver for arrangements of the loops and evenly recoiling. The obtained results are as follows: 1. The minor diameter of a loop and the diameter of the coiling pile in a lead core PP rope(ø 10mm) are about 14cm and 60cm while the rope is piled on the bottom. 2. Distribution ratio of the loops within upper or lower 10cm from the transfer belt is 93% with a lead sinker and 98% without sinker using by the smaller loop catcher. 3. The relationship between revolutions of the rotary lever N sub(1) (rpm) and the hauling pulley N sub(p) (rpm) by gear ratio 3:1 in the smaller loop catcher is as follows: N sub(p) =2.86 N sub(1) +23.74 and optimum ratio of horizontal speed of the loops by the rotary lever to hauling speed is about 70%. 4. The rope receiver is swung front and rear for the evenly recoiling and its period can be controlled by gear ratio or hydraulic circuit in accordance with the interval of the loops.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.139-146
• /
• 2014

This paper proposes an efficient method for automatically distinguishing various facial expressions. To recognize the emotions from facial expressions, the facial images are obtained by digital cameras, and a number of feature points were extracted. The extracted feature points are then transformed to 49-dimensional feature vectors which are robust to scale and translational variations, and the facial emotions are recognized by statistical pattern classifiers such Naive Bayes, MLP (multi-layer perceptron), and SVM (support vector machine). Based on the experimental results with 5-fold cross validation, SVM was the best among the classifiers, whose performance was obtained by 50.8% for 6 emotion classification, and 78.0% for 3 emotions.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.69-78
• /
• 2017

This study was conducted to investigate the effects of waterlogging on the net photosynthetic rate, root activity and fruit yield of hot pepper. Plants were grown in two greenhouses: extractor fans and side ventilators began to operate when the inside temperature reached $25^{\circ}C$ in one greenhouse and $35^{\circ}C$ in the other. Waterlogging treatments were performed 54 days after transplanting (when fruit setting at the second flower truss was complete). The plot in each greenhouse was divided into five sections, and each section was watered for 0, 12, 24, 48 or 72 h using drip irrigation. Plants under $25^{\circ}C$ and non - waterlogging treatment exhibited in the greatest growth among treatments. Plant growth generally decreased as the waterlogging period increased. The net photosynthetic rate was highest under non - waterlogging and $25^{\circ}C$ treatment and lowest under 72 h waterlogging and $25^{\circ}C$ treatment. The root activity decreased as the waterlogging period increased, except for plants under 72 h waterlogging treatment at $35^{\circ}C$. The number and weight of red pepper fruits per plant were highest under non - waterlogging treatment at $35^{\circ}C$. The greatest fruit yield was also observed under non - waterlogging treatment at $35^{\circ}C$, with production reaching 3,697 kg / 10a. At the appropriate temperature for hot pepper ($25^{\circ}C$), yields were reduced by 25 - 30% under 12, 24 and 48 h waterlogging treatment compared to non - waterlogging treatment. These results indicate that longer waterlogging periods reduce the growth, net photosynthetic rate, root activity and yields of hot pepper. However, the net photosynthetic rate and stomatal conductance of hot pepper plants grown under 72 h waterlogging treatment recovered nine days after growth under normal growth conditions.