• Journal of the KSME
• /
• v.27 no.6
• /
• pp.496-503
• /
• 1987

지금까지 유한요소망의 자동생성 방법에 대하여 현재 보편적으로 쓰이고 있는 것을 중심으로 살펴보고자 한다. 특히 최근 유한요소해석을 포함한 설계의 완전자동화에 대한 연구 추세에 의해 형상 모델러의 기능이 중요하게 됨에 따라 유한요소망의 자동생성과 형상 모델러의 관계를 기술하였다. 유한요소망의 자동생성에 대한 현재 상황은, 3차원 고체의 경우 모든 가능한 상황에 대처할 수 있는 일반적인 자동생성방법을 위해서는 더 많은 진전이 이루어져야 할 것이다. 특히 이 경우, 2차원 문제와는 달리 해석전에 미리 사용자가 필요한 유한요소망의 밀도를 쉽게 예측할 수 없기 때문에 해석결과나 오류치 평가에 따라 유한요소망을 조절해가는 자체조절 기능이 더욱 중요하게 된다. 이 기능이 충분히 발달되면 자동생성의 문제점이나 그 원리의 복잡성등을 직접 해결할 필요성이 없어질 것이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.685-690
• /
• 2011

This paper describes a seismic analysis of chemical pump using automated mesh generation system. The use of an automated analysis system, involving FE codes together with CAD systems and FE pre- and post-processors, has provided an important step towards shortening the design process and structural optimization. The FE model, which is a FE mesh accompanied with the analysis condition, is automatically converted from the analysis model. The FE models are then automatically analyzed using the FE analysis code. This integrated FE simulation system is applied to an analysis of three-dimensional complex solid structures such as a chemical pump.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.64-73
• /
• 1997

솔리드 모델러, 자동요소분할 기법, 4면체 특이요소, 응력확대계수의 해석 기능을 통합하여, 3차원 균열의 응력확대계수를 효율적으로 해석할 수 있는 시스템을 개발하였다. 균열을 포함하는 기하모델을 CAD 시스템을 이용하여 정의하고, 경계조건과 재료 물성치 및 절점밀도 분포를 기하모델에 직접 지정함으로써, 퍼지이론 에 의한 절점발생과 데로우니 삼각화법에 의한 요소가 자동으로 생성된다. 특히, 균열 근방에는 4면체 2차 특이요소를 생성시켰으며, 유한요소 해석을 위한 입력 데이터가 자동으로 작성되어 해석코드에 의한 응력 해석이 수행된다. 해석 후, 출력되는 변위를 이용하여 변위외삽법에 의한 응력확대계수가 자동적으로 계산되어 진다. 본 시스템의 효용성을 확인하기 위해, 인장력을 받는 평판내의 표면균열에 대해 해석하여 보았다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.230-235
• /
• 2009

This paper describes an automatic finite element mesh generation for finite element analysis of three-dimensional structures. It is consisting of fuzzy knowledge processing, bubble meshing and solid geometry modeler. This novel mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of bubbles, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid structures. Bubble is generated if its distance from existing bubble points is similar to the bubble spacing function at the point. The bubble spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of finite element for three-dimensional solid structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for 3D geometry.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.157-165
• /
• 1994

A general-purpose program for automatic two-dimensional finite-element modelling with quadrilateral elements was developed in this research. The conventional looping method employed in the program was introduced with emphasis on a new splitting criterion and a splitting scheme developed for improving the method. Some application examples were given, which show versatility and applicability of the developed program.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.77-86
• /
• 2010

This paper provides background theories and numerical results of automatic finite element (FE) mesh generation for freeform discrete structures. The present method adopts the computer aided geometric design (CAGD) technique to overcome the limitation of case-sensitive traditional automatic FE mesh generator. The present technique involves two steps. The first one is to represent the shape of the structure using the geometric model based on the CAGD and the second one is to generate the discrete FE mesh of spatial structures over the geometric model. From numerical results, it is found to be that the present technique is very easy to produce the FE mesh for free-form spatial structures and it can also reuse some features of traditional automatic mesh generator in the process. Furthermore, it shows the possibility to be used for the shape optimization of large spatial structures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.43-52
• /
• 1990

Theoretical foundation and algorithms are presented of a new surface modeling and pre-processing system for the three-dimensional structures. The modeling method is based on the boundary representation scheme and composed of two hierarchical model structures: curve-network and surface models. The concept of modeling curve as a union of links is introduced to facilitate surface modeling via various transfinite mapping techniques or Coons Patches. Efficiency and novel aspects of the present method are discussed. Finite element mesh genceration and application procedures will be reported in a later paper.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.1
• /
• pp.122-126
• /
• 2008

Integrating a 3D solid modeler with a general purpose FEM code, an automatic stress intensity factor analysis system of the 3D crack problems has been developed. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated and quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. Finally, the complete finite element(FE) model generated, and a stress analysis is performed. This paper describes the methodologies to realize such functions, and demonstrates the validity of the present system.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.236-243
• /
• 1998

퍼지 이론과 계산기하학적 수법에 의한 자동요소 생성법, 해석코드 및 상용 솔리드 모델러를 유기적으로 통합한 자동화된 설계시스템을 개발하였다. 본 시스템은 여러 가지 복합현상과 관련된 실제 구조물에 대한 설계기능을 갖고 있다. 정전장 해석, 변형해석 및 모드해석 등과 같은 해석하고자 하는 물리적인 현상에 의존한 형상모델이 자동적으로 유한요소모델로 변환되어 해석을 수행한다. 또한 신경망의 기능을 도입, 통합시킴으로써 설계해의 영역을 유용하게 제시하여 준다. 개발한 시스템은 정전 마이크로머쉰의 성능 평가에 적용하여 그 효용성을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2183-2188
• /
• 2009

This paper describes an automatic mesh generation system for finite element analysis of three-dimensional cracks. It is consisting of fuzzy knowledge processing, bubble meshing and solid geometry modeler. This novel mesh generation process consists of three sub-processes: (a) definition of geometric model, i.e. analysis model, (b) generation of bubbles, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional crack structures. Bubble is generated if its distance from existing bubble points is similar to the bubble spacing function at the point. The bubble spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Practical performances of the present system are demonstrated through several mesh generations for 3D cracks.