• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.9-20
• /
• 2013

Defense M&S for weapons effectiveness is a realistic way to support virtual warfare similar to real warfare. As the war paradigm becomes platform-centric to network-centric, people try to utilize smartphones as the source of sensor, and command/control data in the simulation-based weapons effectiveness analysis. However, there have been limited researches on integrating smartphones into the weapon simulators, partly due to high modeling cost - modeling cost to accomodate client-server architecture, and re-engineering cost to adapt the simulator on various devices and platforms -, lack of efficient mechanisms to exchange large amount of simulation data, and low-level of security. In this paper, we design and implement Smartphone Adaptor to utilize smartphones for the simulationbased weapons effectiveness analysis. Smartphone Adaptor automatically sends sensor information, GPS and motion data of a client's smartphone to a simulator and receives simulation results from the simulator on the server. Also, we make it possible for data to be transferred safely and quickly through JSON and SEED. Smartphone Adaptor is applied to OpenSIM (Open simulation engine for Interoperable Models) which is an integrated simulation environment for weapons effectiveness analysis, under development of our research team. In this paper, we will show Smartphone Adaptor can be used effectively in constructing a Live simulation, with an example of a chemical simulator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.72-83
• /
• 2006

It is not a practical solution that the DDoS attacks or worm propagations are protected and responded within a domain itself because it clogs access of legitimate users to share communication lines beyond the boundary a domain. Especially, the DDoS attacks with spoofed source address or with bogus packets that the destination addresses are changed randomly but has the valid source address does not allow us to identify access of legitimate users. We propose a scheme of distributed network security management to protect access of legitimate users from the DDoS attacks exploiting randomly spoofed source IP addresses and sending the bogus packets. We assume that Internet is divided into multiple domains and there exists one or more domain security manager in each domain, which is responsible for identifying hosts within the domain. The domain security manager forwards information regarding identified suspicious attack flows to neighboring managers and then verifies the attack upon receiving return messages from the neighboring managers. Through the experiment on a test-bed, the proposed scheme was verified to be able to maintain high detection accuracy and to enhance the. normal packet survival rate.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.1
• /
• pp.59-73
• /
• 2003

As a means of overcoming the linguistic barrier between different languages in the Internet, a new sign-language communication system with CG animation techniques has been developed and proposed. In the system, the joint angles of the arms and the hands corresponding to the gesture as a non-verbal communication tool have been considered. The emotional expression, however, could as play also an important role in communicating each other. Especially, a comic expression is more efficient than real facial expression, and the movements of the cheeks and the jaws are more important AU's than those of the eyebrow, eye, mouth etc. Therefore, in this paper, we designed a 3D emotion editor using 2D model, and we extract AU's (called as PAU, here) which play a principal function in expressing emotions. We also proposed a method of generating the universal emotional expression with Avatar models which have different vertex structures. Here, we employed a method of dynamically adjusting the AU movements according to emotional intensities. The proposed system is implemented with Visual C＋＋ and Open Inventor on windows platforms. Experimental results show a possibility that the system could be used as a non-verbal communication means to overcome the linguistic barrier.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.116-123
• /
• 2007

Despite the number of backlight manufacturer is increased as the market of flat panel display equipments and related development devices is enlarged, the inspection based on the human eye is still used in many backlight production lines. The defects such as particle, spot and scratch on the light emitting surface of the backlight prevent the LCD device from displaying the colors correctly. From that manual inspection it is difficult to maintain the quality of backlight consistently because the accuracy and the speed of the inspection may change with the physical condition of the operater. In this paper we studied on the development of automatic backlight surface defect inspection system. For this, we made up of the computer vision system and we developed the main program with various user interfaces to operate the inspection system effectively. And we developed the image processing module to extract the defect information. Furthermore, we presented the labeling process to reconstruct defect regions using the labeling table and the defect index. From the experimental results, we found that our system can detect all defect regions identified from human eye and it is sufficient to substitute for the conventional surface inspection.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.133-142
• /
• 2014

Landsat is one of the popular satellites for observing land surface that is used in various areas including monitoring, detecting and classifying changes in land surface. However, shades, which cloud itself and its shadow, interrupted often clear observation and analysis of ground surface. For this reason, the process of removing shades and restoring original ground surfaces are critical for geospatial users. This study is planned to recommend a methodology for more accurate and clear images of Landsat-8 sensor, which provided two additional bands of costal/aerosol and cirrus. In fact, those bands are known as functioned effectively in detecting and restoring shades. Otsu's thresholding technique to detect clouds, we replaced those detective shades by using experimental and reference images. In accurate assessment, the overall accuracy and kappa coefficients were about 85% and 0.7128, respectively. This indicates that the proposed technique is effective for recovering the original land surface.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.119-125
• /
• 2015

A concentration meter is widely used at purification plants, sewage treatment plants and waste water treatment plants to sort and transfer high concentration sludge and to control the amount of chemical dosage. When the strange substance is contained in the sludge, however, the attenuation of ultrasonic wave could be increased or not be transmitted to the receiver. At that case, the value of concentration meter is higher than the actual density value or vibrated up and down. It has also been difficult to automate the residuals treatment process according to the problems as sludge attachment or damage of a sensor. Multi-beam ultrasonic concentration meter has been developed to solve these problems, but the failure of the ultrasonic beam of a specific concentration measurement value degrade the performance of the entire system. This paper proposes the method to improve the accuracy of sludge concentration rate by choosing reliable sensor values and learning them by proposed algorithm. The prediction algorithm is chosen as neuro-fuzzy model, which is tested by the various experiments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.238-240
• /
• 2006

네트워크상에서 발생하는 다양한 형태의 대량의 데이터를 정확하고 효율적으로 분석하기 위해 설계되고 있는 마이닝 시스템들은 목표지향적으로 훈련데이터들을 어떻게 구축하여 다룰 것인지에 대한 문제보다는 대부분 얼마나 많은 데이터 마이닝 기법을 지원하고 이를 적용할 수 있는지 등의 기법에 초점을 두고 있다. 따라서, 점점 더 에이전트화, 분산화, 자동화 및 은닉화 되는 최근의 보안공격기법을 정확하게 탐지하기 위한 방법은 미흡한 실정이다. 본 연구에서는 유비쿼터스 환경 내에서 발생 가능한 문제 중 복잡하고 지능화된 침입패턴의 탐지를 위해 데이터 마이닝 기법과 결함허용방법을 이용하는 개선된 학습알고리즘과 후처리 방법에 의한 RTPID(Refinement Training and Post-processing for Intrusion Detection)시스템을 제안한다. 본 논문에서의 RTPID 시스템은 active learning과 post-processing을 이용하여, 네트워크 내에서 발생 가능한 침입형태들을 정확하고 효율적으로 다루어 분석하고 있다. 이는 기법에만 초점을 맞춘 기존의 데이터마이닝 분석을 개선하고 있으며, 특히 제안된 분석 프로세스를 진행하는 동안 능동학습방법의 장점을 수용하여 학습효과는 높이며 비용을 감소시킬 수 있는 자가학습방법(self learning)방법의 효과를 기대할 수 있다. 이는 관리자의 개입을 최소화하는 학습방법이면서 동시에 False Positive와 False Negative 의 오류를 매우 효율적으로 개선하는 방법으로 기대된다. 본 논문의 제안방법은 분석도구나 시스템에 의존하지 않기 때문에, 유사한 문제를 안고 있는 여러 분야의 네트웍 환경에 적용될 수 있다.더욱 높은성능을 가짐을 알 수 있다.의 각 노드의 전력이 위험할 때 에러 패킷을 발생하는 기법을 추가하였다. NS-2 시뮬레이터를 이용하여 실험을 한 결과, 제안한 기법이 AOMDV에 비해 경로 탐색 횟수가 최대 36.57% 까지 감소되었음을 알 수 있었다.의 작용보다 더 강력함을 시사하고 있다.TEX>로 최고값을 나타내었으며 그 후 감소하여 담금 10일에는 $1.61{\sim}2.34%$였다. 시험구간에는 KKR, SKR이 비교적 높은 값을 나타내었다. 무기질 함량은 발효기간이 경과할수록 증하였고 Ca는 $2.95{\sim}36.76$, Cu는 $0.01{\sim}0.14$, Fe는 $0.71{\sim}3.23$, K는 $110.89{\sim}517.33$, Mg는 $34.78{\sim}122.40$, Mn은 $0.56{\sim}5.98$, Na는 $0.19{\sim}14.36$, Zn은 $0.90{\sim}5.71ppm$을 나타내었으며, 시험구별로 보면 WNR, BNR구가 Na만 제외한 다른 무기성분 함량이 가장 높았다.O to reduce I/O cost by reusing data already present in the memory of other nodes. Finally, chunking and on-line compression mechanisms are included in both models. We demonstrate that we can obtain significantly high-performanc

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.124-132
• /
• 2002

In this paper, we present a vision algorithm and method for input image improvement and preprocessing of dented and raised characters on the sidewall of tires. we define optical condition between reflect coefficient and reflectance by the physical vector calculate. On the contrary this work will recognize the engraved characters using the computer vision technique. Tire input images have all most same grey levels between the characters and backgrounds. The reflectance is little from a tire surface. therefore, it's very difficult segment the characters from the background. Moreover, one side of the character string is raised and the other is dented. So, the captured images are varied with the angle of camera and illumination. For optimum Input images, the angle between camera and illumination was found out to be with in 90$^{\circ}$. In addition, We used complex filtering with low-pass and high-pass band filters to improve input images, for clear input images. Finally we define equation reflect coefficient and reflectance. By doing this, we obtained good images of tires for pattern recognition.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.338-344
• /
• 2010

Both ends of welding line are often closed by wall in the welding of ship blocks. In this research, seam tracking sensing system for butt welding in the condition with wall was developed. Seam tracking sensing system measures position of carriage from wall and detects root-pass of welding line. The system consists of the laser displacement sensors and ultrasonic sensors. The laser displacement sensor reciprocal1y rotates by the motor and measures a distance from laser sensor to the welding material. The ultrasonic sensor measures a distance between welding system and walls. The distance measured by the ultrasonic sensor is used to get X(driving) position and to determine initial and end point of the weld line. Y(weaving) and Z(height) of the weld line are obtained by the distance measured by the laser displacement sensor and the orientation of the sensor. The sensing system includes the controller that is independent from the welding carriage. The seam tracking sensing system is attached to both side of welding carriage so that interference between welding torch and sensing system can be avoided during the welding. And both side sensing system minimize dead zone. Finally, developed sensing system was adhered to welding carriage and verified usefulness by experiments.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.133-139
• /
• 2012

For the examination of nuclear medicine, myocardial scan is a good method to evaluate a hemodynamic importance of coronary heart disease. but, the automatized qualitative measurement is additionally necessary to improve the decoding efficiency. we suggests the creation of cardiac three-dimensional model and model of three-dimensional cardiac thickness as a new measurement. For the experiment, cardiac reduced cross section was obtained from SPECT. Next, the pre-process was performed and image segmentation was fulfilled by level set. for the modeling of left cardiac thickness, it was realized by applying difference equation of two-dimensional laplace equation. As the result of experiment, it was successful to measure internal wall and external wall and three-dimensional modeling was realized by coordinate. and, with laplace formula, it was successful to develop the thickness of cardiac wall. through the three-dimensional model, defects were observed easily and position of lesion was grasped rapidly by the revolution of model. The model which was developed as the support index of decoding will provide decoding information to doctor additionally and reduce the rate of false diagnosis as well as play a great role for diagnosing IHD early.