• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.3
• /
• pp.71-78
• /
• 1999

This paper presents an integrated and automated inspection system using image processing technology for the automotive engine assembly process. The system make it possible for the inspected data to be entered directly from the machine vision into the statistical process control system. Such direct entry enables the prompt preparation of corrective actions against process problems. An IVP-150 machine vision board is installed within the PC for image processing, and a template matching technology is implemented to precisely verify quality factors. The developed system showed robustness to the problems of noise, distortion, and orientation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.101-102
• /
• 2013

CAN통신은 자동차 내부 전자제어장치 간의 통신을 위하여 개발되었으며, CAN통신은 UART 방식과는 달리 전송속도와 안정성 측면에서도 뛰어나고 배선 결선에서도 간편한 버스타입으로 구성할 수 있어서 배선량을 줄일 수 있어 생산시간의 단축과 신뢰성을 높일 수 있다. 최근에는 자동제동장치, 선박의 엔진제어 등 다양한 분야에서 사용되고 있다. 본 논문에서는 CAN통신을 기반으로 하여 3개의 리니어 액추에이터(Linear Actuator)를 통하여 수평 플랜트에 대한 수평제어를 구현하였다. 또한 본 논문의 수평제어시스템은 수평조절을 하는 액추에이터와 CAN통신을 내장한 AT90CAN128로 구성되어 있다. CAN통신을 기반의 수평제어를 통해 선박이나 자동차의 액추에이터를 조절하여 수평을 제어하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.816-817
• /
• 2013

본 논문은 전기자동차를 이용한 관광에 있어서 사용자가 선택한 목적지 집합에 대해 전기자동차 충전까지 고려하여 방문 순서를 결정하고 그 결과를 사용자 단말기 App을 통하여 보여주는 관광 스케줄러를 구현하였다. 스케줄링 엔진은 방문총거리가 짧으면서 충전대기시간을 최소화하기 위해 $A^*$ 알고리즘과 유전자 알고리즘으로 구현되었고 웹서비스 방식으로 단말기와 상호작용함으로써 서비스의 확장성과 편의성을 기한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.281-284
• /
• 2011

Recently, many drivers was the damage caused by similar oil product sales and gas station by not using quantitative gas. so, these damages is expected to rise damages by increasing these problem. By using similar oil products, caused damage in the fuel lines' working of lubrication and self-cleaning function for the occurred trouble in the part of the early obsolescence and the accumulation of impurities in the fuel lines, combustion rate due to the difference between retail gasoline engine, the burden of weight, Toxic substances in exhaust emissions, engine oil and unresolved issue is the chemical reaction can occur. to prevent these damages, using the system use in-vehicle state data with OBD-II protocol and measure quantitative gas and similar oil. In this paper, there implement similar oil identification and quantitative gas system through OBD-II scanner to provide WiFi communcation by using WinCe development Board.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.830-833
• /
• 2016

자동차 번호판 인식은 대중적인 감시 기술 중의 한 종류로서, 주어진 비디오나 영상 내 광학문자 인식을 수반한다. 고속도로나 국도 상에 과속 단속 시스템, 재형 건물이나 유통센서 및 주차장 등에서 주차 정산 시스템, 고속도로 톨 게이트에서 hi-pass 에러 및 불법 도주 차량 잔속 시스템, 전국 주요 도로 불법 주 정차 단속 시스템, 공공기관, 기업 출퇴근 시간 확인 및 외부 차양 안내 시스템 등의 지능형 교통 시스템(ITS)이나 국도 상에 범위 차량 검거 시스템, 사건 발생 시 주요 도로상에 설치된 CCTV를 통해 용의 차량 이동 추적 시스템, 이동식 범죄 차량 조회, 버스에 탑재된 버스 전용차선 위반 단속들의 지능형 방범 시스템 등에 활용하고 있다. 번호판 인식은 자동차 번호판 국부화, 번호판의 크기, 차원, 명암대비, 밝기를 조정하는 정규화, 개별문자를 얻어내는 문자 분할, 문자를 인식하는 광학 문자 인식, 번호판의 형태, 크기, 위치 들이 연도별, 지역별로 차이가 있는 번호판들의 데이터베이스를 비교하여 구문 분석을 하는 절차를 거친다. 본 논문에서는 EmguCV를 이용하여 구현한 번호판 감지를 수행하여 위치를 찾아내고, 오픈 소스 광학 문자 인식 엔진으로 잘 알려져 있는 테서렉트 OCR을 이용하여 번호판의 문자를 인식하는 자동 인식 프로그램을 구현하고 기술하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2446-2452
• /
• 2012

In order to meet the recently enhanced emission standards at home and abroad, it is necessary to develop the CRDI ECU control algorithm that users can adjust fuel injection timing and amount in response to their needs. Therefore, this study developed the simulator for knocking analysis that enables knocking discrimination and engine balance correction applicable to the ECU exclusive to the industrial CRDI engine. The purpose of this study is to provide the driver-oriented diagnostic service that enable drivers to diagnose vehicles directly by developing diagnostic devices for vehicles with ths use of the results of the developed simulator for knocing analysis according to the OBD-II standards. For this purpose, this study aims to improve the fuel efficiency of vehicles by proposing the S/W design method of the OBD-II diagnosis device that can provide real-time communcations with the use of wired system and bluetooth module as a wireless system to send and recevice automobile fault diagnosis signal and sensor output signal, and to suggest an improvement for engine efficiency by minimizing the generation of harmful exhaust gas.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.264-270
• /
• 2012

e-Training focusing on the experience and practice accelerates actual-active learning and enforces the learning effects against the existing theory based education. The most typical hans-on training system is augmented reality. Especially, in the training field installed augmented reality system, the automobile maintenance trainee experiences effective training with the immediate information, which is indicating the location of parts and the procedure of repairing. The tracking is the core technology of the augmented reality system. The performance of augmented reality system depends on the tracking technology. Therefore, this paper suggests the tracking technology which is proper to the e-Training augmented reality service technology for the car mechanics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.404-407
• /
• 2018

- A car is a means of transporting passengers or cargo on the ground by transmitting power from the engine to the wheels. In the past, automobiles started from internal combustion engines have recently been introduced with hybrid electric vehicles and pure electric vehicles. As a result, the deployment of high-tech electrical and electronic products is inevitably increased due to the development of technology and stability of various parts, resulting in a more complicated and diversified electromagnetic environment. CISPR 25 is conducting research on the test method for electromagnetic noise. In order to analyze the noise pattern according to the GND condition required in the radiation emission test, various conditions are applied for comparison. 2 Page - General characteristics of EMI chambers, techniques for testing and measuring equipmen 3 Page - RE test : Analysis of Noise due to Ground Strap Change when Sample is in Center, Analysis of Noise due to Ground Strap Changes when the Sample is not in the Center.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.861-865
• /
• 2009

Technical development in car has utilized electronic controls (ECU, Electronic Control Unit) recently if was achieved machine such as engine performance in priority and electronic side technical development that improve safety, convenience, expense etc. is proceeded vigorously. Also, preference of consumers for car is various model's number according to change at the fast speed and complexity of software required from vanguard service development was increased greatly. Software development expense dominated considerable weight in car manufacture expense by such change and automakers established OSEK/VDX that is standard of automobile embeded system to reuse application software by module to respond this and transplant easily to other control device. Do when search about all item that is necessary in real-time OS structure that examines OSEK/VDX standard that is presented as the alternative to respond environment that change rapidly that refer in dignified mien after it is original, and uses actuality OSEK/VDX.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.657-661
• /
• 2019

The automobile industry is representative industry of complex characteristics, which employing 10 million people, the largest manufacturing industry over $1 trillion in sales and assembling with 20,000 parts to make complete automobile and automobile assembly processes have a lower automation rate than other processes, which is labor intensive processes of assembling to painted body with 3,000 components such as seats, built-in, instrument panel, glass, engine, transmission units. However, the current assembly process does not have real-time monitoring. If a tool position tracking system is adapted to assembly process for directing consistent work order and checking for missing work, the productivity and quality improvement of the assembly process can be achieved by preemptively preventing possible defects in the assembly process. So, this paper aims to develop a Tool Position tracking system using UWB(Ultra Wide Band) with trilateration and proves their effectiveness for real-time monitoring of automotive assembly process.