• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.344-351
• /
• 2015

Braking force inspection of vehicles in service is certainly one of the most important characteristics that affect vehicle safety. Up to now, in domestic country, the regular safety inspection of vehicles in service has been tested with a roller type brake test (a static braking force inspection system). But, in EU and USA etc. in recent years, it has been tested with a plate type brake test (a dynamic braking force inspection system). In this study, to compare the characteristics of above two test systems, the correlations for the results of braking force are evaluated statistically. As the results, in the case of main braking force, the range of the $R^2$ of the deviation for the left and right side is 0.5386 ~ 0.6231 in the rear axle and 0.0032 ~ 0.0052 in the front axle respectively, then the $R^2$ in the front axle is lower than that in the rear axle and the total variation is unexplained by the least-squares regression line statistically. Also, the p-value for the deviation of the left and right in the front axle is 0.4839 ~ 0.5755, then it has nonsignificant in the front axle. Therefore, the static braking force inspection system can not reflect the inertia force that there is a load transfer from the rear axle to the front axle during braking. Accordingly, it is necessary to adopt the dynamic braking force inspection system which can reflect the inertia force on the regular vehicle safety inspection in domestic country.

• The tire
• /
• s.234
• /
• pp.64-65
• /
• 2008

2008년 타이어 안전검사 서비스 행사 계획/"자율안전확인제도" 시행 이후/"자동차관리법" 개정안, 국회 의결

• Proceedings of the KAIS Fall Conference
• /
• 2000.04a
• /
• pp.13-13
• /
• 2000

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.3
• /
• pp.125-130
• /
• 2008

Multivariate analysis is a rapidly expanding approach to data analysis. One specific technique in multivariate analysis is Principal Component Analysis (PCA). PCA is a statistical technique that linearly transform a given set of variables into a new set of composite variables. These new variables are orthogonal to each other and capture most of the information in the original variables. PCA is used to reduce the number of control points to be checked by measurement system. Therefore, the structure of the data set is simplified significantly It is also shown that eigenvectors obtained by conducting principal component analysis on the basis of the covariance matrix can be used to physically interpret the pattern of relative deformation for the points. This case study reveals the twisting deformation pattern of the underbody which is the largest mode of the total variation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.220-222
• /
• 2019

Korean automobile industry has been slow down since 2016. The most fundamental solution for solving this problem is to develop competitive parts. There are two important factors for developing competitive parts. The most important is product design technology, and the second most important is production technology. Production technology is important because it requires lowering the production cost except for the material cost and continuously maintaining the quality. In this paper, an intelligent smart inspection system is proposed and designed to inspect automobile parts of company C. At present, the basic and detailed design of this system has been completed and it is in the development progress stage. If the system is successfully developed, it is expected that the quality inspection stage of company C will be automated and the defect rate will be reduced.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.862-864
• /
• 2005

자동차 전자 부품 중 하나인 정션박스의 자동 시각 검사 시스템은 사랑의 육안 검사를 자동화함으로써, 정확하고 빠른 검사가 가능하다. 또한 검사 결과를 데이터베이스화하여 지속적인 불량 발생요인을 분석할 수 있기 때문에 불량률을 감소시켜 제품 신뢰도를 향상시킬 수 인다. 본 연구에서는 정션박스에 삽입된 퓨즈와 릴레이의 유무 및 오결합을 자동으로 검사하는 자동 시각 검사 시스템을 구현하였고 이를 적용한 결과 신속하고 정확한 검사가 가능함을 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.196-205
• /
• 2016

The exhaust gas discharged by cars not only threatens the health of the human body, but also contributes to global warming, due to the resulting increase in the concentrations of ozone, fine dust and carbon dioxide. Therefore, the government has steadily implemented careful inspection systems for exhaust emissions, in order to efficiently regulate the exhaust gas of cars. Studies on reducing the exhaust emissions of automobiles have been conducted in various fields, including ones designed to reduce the generation of HC, NOx, and $CO_2$ in the exhaust emission of vehicles. However, there have been insufficient studies on the reduction of the exhaust emission for old diesel vehicles. To develop careful inspection systems for the exhaust emissions of old diesel vehicles, studies on the reduction of the exhaust emissions and improvement of power are necessary by cleaning the carbon sediment in both the intake manifold and injector. Therefore, in this study, we analyzed and compared the amounts of gas emitted when simultaneously cleaning or not cleaning the intake manifold and injector of diesel automobiles with mileages over 80,000 km and operating periods over 5 years. The experimental results showed that in the case where the intake manifold and injector were simultaneously cleaned, there was a decline of 75.2% in the gas emission compared to the cases where only the manifold or injector is cleaned. Also, it was found that simultaneously cleansing the intake manifold and injector enabled the exhaust standard to be satisfied for less than 30% within 8.5 sec.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.25-36
• /
• 2017

The purpose of this study is to analyze traffic accident reduction effect of the introduction of motorcycle safety inspection. To analyze the effect of motorcycle inspection, we first estimate the number of defective motorcycles, and calculate the probability of accident occurrences caused by the defect using four year traffic accident data. Finally, we estimate the number of reduced accidents due to the introduction of the inspection and the total reduced accident cost. In this study, we analyzed three scenarios. It is analyzed that when the safety inspection system is applied to all motorcycles, 642 cases of traffic accidents and 325 million won per year of traffic accident costs are reduced. It is approximately 0.1% of 2014 total traffic accident cost of 26.5725 trillion won per year. It suggests that the cost of traffic accidents and traffic accidents due to vehicle factors are reduced when the safety inspection system is introduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.756-760
• /
• 2017

Meeting the growing demand deadlines, reducing the production cost and upgrading the quality control measurements are the reasons why the automotive part manufacturers are venturing into automation. Attaining these objectives is impossible with human inspection for many reasons. Accordingly, the introduction of inspection system purposely for door hinge bracket inspection is presented in this study as an alternative for human inspection. This proposal is designed to meet the demands, features and specifications of door hinge bracket manufacturing companies in striving for increased throughput of better quality. To improve demerits of this manual operation, inspection system is introduced. As the inspection algorithm, template matching algorithm is applied to distinguish the articles of good quality and the poorly made articles. Through the verification test of the inspection process algorithm and the similarity metric matching algorithm, the detection accuracy was 98%, and it was applied to the production site to contribute to the improvement of the productivity due to the decrease of the defective product.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.854-857
• /
• 2012

차량용 Wire Harness 전기 장치가 안전과 편의를 위해 차량에 복잡하게 설치되며 자동차 내 외부에의 정보와 제어신호를 잘못 전달해서 발생하는 돌발 교통사고와 Harness의 가공 잘못으로 정격전류 흐름의 방해로 인한 사고로 부터의 안정성을 검토하는 검사시스템 단계의 최적화를 위함이다. 본 논문은 Wire Harness 검사단계 중 Harness Tester를 통해 전선 부분의 도통검사 및 커넥터 체결시 Harness Tester 에 대한 검사 방법 중 Harness Editor 사용하여 7 개의 파일로 변환하던 것을 XML 파일 시스템으로 바꾸어 검사 함으로써 검사단계에서의 손실을 줄일 수 있다. 또한 모바일 기기와 호환 가능하도록 하여 무선으로 Wire Harness를 Open, Short, Extra, add 테스트 하는 방법을 연구 하였다.