• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.29-36
• /
• 2009

In this paper, we proposed auto exposure(AE) algorithm and hardware implementation for apply to mobile phone camera. AE is a function that control camera exposure automatically for appropriate to object. Existing AE is using micro controller unit and there are some problems about high expense and slow processing speed. For improve these problems, we proposed AE algorithm for hardware implementation without micro controller unit therefor we can expect improvement about the content of a production and operation speed. We proposed the algorithm that is considered efficiency of hardware resource and the results of hardware implementation of proposed AE algorithm apply to mobile phone camera sensor, we verified proposed AE function.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.303-306
• /
• 2009

자동노출(auto exposure)는 피사체나 광원의 밝기에 변화에 대응하여 카메라로부터 취득된 영상의 노출치를 일정하게 유지시켜주는 기능을 나타내며, 모바일 카메라의 핵심 구성 요소 중의 하나이다. 일반적으로 자동노출 알고리즘은 소프트웨어로 구현되기 때문에, 모바일 카메라 시스템에는 CPU와 소프트웨어를 저장하기 위한 ROM을 내장하는 형태를 가지는데, 이는 유연성을 확보하는 대신 CPU와 메모리라는 비용증가로 이어지게 된다. 본 논문에서는 모바일 카메라를 위하여 임의의 프레임 레이트 가변기능과 아날로그 게인 조정이 가능한 자동 노출 알고리즘을 제안하고, 이에 대한 하드웨어 구조를 제안한다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.13-16
• /
• 2006

사진을 찍을 때 카메라는 보기 좋은 사진을 얻을 수 있도록 많은 기능을 제공하고 있다. 대표적인 기능으로 자동 초점거리 조정(Auto Focus), 자동 색온도 보정(Auto White Balance), 자동 노출 조정(Auto Exposure)이 있다. 본 논문에서는 편리한 기능들 중 하나로써 자동 노출제어 시스템을 구현하였다. 본 논문에서 제안하는 자동 노출제어 시스템은 가변 시상수(Variable Time Constant)를 가지는 IIR 필터를 이용한다. Zone System에서 보여주는 사물의 휘도정보를 바탕으로 하여 이상적인 영상의 휘도 특성 그래프를 얻어내고, 이와 현재의 노출설정에서 휘도와 비교하여 적정 노출을 찾는다. 제안하는 자동 노출제어 시스템은 적정 노출을 얻을 수 있는 위치로 이동하기 위하여 기존의 마이크로 콘트롤러 등을 이용하여 구현하는 방법과 달리 간단한 구성을 가지는 IIR 필터를 이용한다. 제안하는 자동 노출제어 시스템은 간단한 구성을 가지므로 콤팩트 이미지 센서를 구성하기 위하여 사용 할 수 있다.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.1-13
• /
• 2020

There are many factors that influence the image quality of CMOS camera images, among which the image exposure time is an important factor. If the image exposure time is long, the entire image on the screen becomes brighter. If the exposure time is shorter, the entire image becomes darker. When photographing a still image, real time is not required because the automatic exposure system is given sufficient time to obtain an appropriate exposure time. However, if the surroundings and environment change rapidly like the black box of a driving car, the exposure time should be applied in response to real time. To this end, a robust automatic exposure system for real-time performance and ambient light environment is required. An automatic exposure system that has real-time capability and is robust against the ambient light environment is required. we designed a real-time control sysem capable of parallel operation processing through the design of an embedded system using zynq's logic and ARM core, and developed a real-time CMOS automatic exposure system that is robust to noise and converges to a desired target value within 66 ms through PID control.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.293-298
• /
• 2012

In digital mammography, Exposure factor were automatically chosen using by measurement breast thickness and the density of mammary gland. It may cause a increase glandular dose. The purpose of this study was to investigate optimal image quality in digital magnification mammography to decrease radiation exposure of patient dose. Auto mode gives the best image quality however, AGD showed better image quality. Image quality of manual mode passed phantom test and SNR at 55% mAs of auto mode commonly used in the digital magnification mammography. Also it could reduce AGD. According to result, manual mode may reduce the unnecessary radiation exposure in digital magnification mammography.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.276-283
• /
• 2019

The purpose of this study is to evaluate the usefulness of automatic exposure control (AEC) by analyzing entrance surface dose (ESD) and entropy on using automatic exposure and manual exposure. The experimental method was to measure the dose by placing a semiconductor dosimeter on the Rando Phantom for the Pelvis, Abdomen, Skull, and Chest regions. The DICOM file was simultaneously acquired and then entropy was analyzed by using Matlab. As a result, when using the automatic exposure control, dose of all sites was lower than manual exposure's dose and entropy was high. In addition, paired t-test was performed for each item and p<0.05 was found in each item. In conclusion, the use of automatic exposure control can be a useful method to contribute to the optimization of the exposure dose and the image quality by reducing the amount of unnecessary radiation amount and information loss that can occur in X-ray examination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1497-1502
• /
• 2009

AE(Auto exposure) is a function to maintain the exposure value of a captured image constant, and is one of the crucial functionalities of a CIS-based mobile camera. Generally AE is implemented in software, requiring a CPU and a ROM to store the corresponding software. This approach increases the hardware size at the cost of increased flexibility. In this paper, we propose an AE algorithm featuring variable frame-rate and adaptive analog gain control, as well as a FSM-based hardware architecture for a CIS-based mobile camera.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.257-264
• /
• 2007

In order to obtain a fine picture, a camera has many convenient functions. Its representative functions are Auto Focus(AF), Auto White Balance(AWB) and Auto Exposure(AE). In this paper, we present the new algorithm of Auto Exposure control system, one of its useful functions The proposed algorithm of Auto Exposure control system is based on IIR Filter with Variable Time Constant. First, in order to establish the standards of exposure control, we compare change of the picture luminance with luminance of an object in the Zone system. Second, we make an ideal characteristic graph of luminance by using the results. Finally, we can find the value of the right exposure by comparing an ideal characteristic graph of the luminance with the value of the current expose of a scene. We can find an appropriate exposure as comparing the ideal characteristic graph of the luminance with current exposure of a scene. In order to find a suitable exposure state, we make use of IIR Filter instead of a conventional method using micro-controller. In this paper, the proposed system has therefore simple structure, we use it for compact image sensor module used in the handheld device.

• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.220-224
• /
• 2014

In this study we assessed the efficacy of an automatic dispensing/injection system (ADIS) to reduce the radiation exposure of workers during PET procedures. NMW(Nuclear Medicine Workers) were classified into 2 groups, one of which used conventional method and the other used an ADIS. The radiation dose during injection were also measured in both groups, with another set of experiment. In dispensing step, ADIS imposed significantly less radiation dose than conventional method, both to finger and to whole body. In injection step, ADIS also imposed significantly less dose to finger, while the dose of whole body was somewhat larger in ADIS than in conventional method. Using ADIS, the radiation exposure of NMW during dispensing was markedly reduced. Also, the exposure of finger during injection was markedly reduced, although exposure of whole body was mildly increased.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.56-62
• /
• 2010

Auto-exposure control automatically calculates and adjusts the exposure for consecutive input image. Recently, this is usually controlled by the sensor gain, however, unsuitable control causes oscillation of luminance for sonsecutive input images, called as flickering. Also, in mobile phone cameras, only simple information, such as the average luminance value, can be utilized due to coarse performance. Therefore, this paper presents a new real-time AE control method using a Look Up Table(LUT) based on Scene-Luminance curves to avoid the generation of flickering. Prior to the AE control, a LUT is constructed, which illustrates the characteristic of outputs for input patches corresponding to sensor gains. The AE control is first performed by estimating a current scene as a patch using the proposed LUT. A new sensor gain is then estimated using also LUT with previously estimated patch. The entire estimation process is performed using linear interpolation to achieve real-time execution. Based on experimental results, the proposed AE control is demonstrated with real-time, flicker-free.