• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.191-196
• /
• 2022

Unlike an international combustion engine car, a battery-powered electric vehicle requires an additional heat source for its heating system. A high-voltage coolant heater has the advantages of high efficiency and a wide operating temperature range. In its development, the geometry design of the coolant flow path is essential. This paper presents the thermal flow simulations of a 7kW high-voltage heater with symmetric serpentine flow channels arranged parallelly. The heater performance was evaluated from the simulation results in terms of the pressure and temperature differences and the flow uniformity. The proposed design showed a greater flow resistance and similar heat exchanging capability than the existing parallel serpentine design. It has the advantage of a relatively wide low-temperature surface area, where the control circuit board susceptible to high temperatures can be located.

• Journal of Veterinary Clinics
• /
• v.32 no.5
• /
• pp.399-403
• /
• 2015

Peritoneal dialysis (PD) is a treatment for renal failure and acute poisoning, and uses the patient's peritoneum in the abdomen as a membrane across which fluids and dissolved substances are exchanged from the blood. In this study, we evaluated the therapeutic efficacy and complications of automated peritoneal dialyzer (APD) in dogs with renal failure. PD was performed in 10 dogs using a swan neck catheter (Neonatal, Coviden) and automatic APD. The efficacy for each dog was assessed by calculating urea reduction ratio (URR) and creatinine reduction ratio (CRR). Mean concentrations of pre-dialysis creatinine and blood urea (BUN) were $7.09{\pm}3.84$ and $145.8{\pm}48.5$, respectively. The mean number of peritoneal dialysis cycles applied was $6{\pm}1$ cycles. Peritoneal dialysis resulted in a significant decrease in BUN concentration in 7/10 dogs, while a significant decrease in creatinine concentration in 9/10 dogs. The mean of URR was higher than that of CRR ($0.39{\pm}0.16$ vs $0.38{\pm}0.13$). The mean CRR and URR per dialysis cycles were $0.064{\pm}0.023$ and $0.065{\pm}0.023$, respectively. Complications found in this study were catheter occlusion, subcutaneous dialysate leakage, septic peritonitis, hypoalbuminemia and overhydration. This study found PD using a swan neck catheter and APD machine showed acceptable efficacy for successful peritoneal dialysis in dogs. However, close monitoring is required to minimize the risk of complication.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.6
• /
• pp.433-442
• /
• 2013

A set of bilingual terms is one of the most important factors in building language-related applications such as a machine translation system and a cross-lingual information system. In this paper, we introduce a new approach that automatically extracts candidates of English-Korean bilingual terms by using a bilingual parallel corpus and a basic English-Korean lexicon. This approach can be useful even though the size of the parallel corpus is small. A sentence alignment is achieved first for the document-level parallel corpus. We can align words between a pair of aligned sentences by referencing a basic bilingual lexicon. For unaligned words between a pair of aligned sentences, several assumptions are applied in order to align bilingual term candidates of two languages. A location of a sentence, a relation between words, and linguistic information between two languages are examples of the assumptions. An experimental result shows approximately 71.7% accuracy for the English-Korean bilingual term candidates which are automatically extracted from 1,000 bilingual parallel corpus.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1343-1352
• /
• 2019

To manage the Internet of Things(IoT) Network, which consists of a large number of various devices, a secure and automatic method of strengthening the IoT network is being proposed. Blockchain has a 'smart contract' element of autonomous execution method, which is emerging as a way to not only exchange data quickly without mediators but also securely and automatically manage processes between IoT devices. In this paper, we implement a prototype of the entire IoT device management system based on the EOSIO with DPoS(Distributed Proof of Stake)-based blockchain structure, proposed as a prior study, including the user application DApp(Decentralized Application) and the actual IoT devices (Raspberry Pi-based device, and smart lamp) that interact with the blockchain platform. We analyze the benefits of the system and measure the time overhead to show the feasibility of the system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.209-214
• /
• 2016

In an environment of IoT services, sensors to track things and human activities are included as an essential element and smart phone is actively used as a means of collecting and processing information from sensors. Especially, wireless communication and NFC provided by the smart phone are key technologies for exchanging information between participants of IoT service. In this paper, we propose and implement the smart attendance checking system based on BLE using a beacon for improving the quality of a university lecture by processing attendance information automatically. Proposed system uses the beacon sensor for being aware of attendance information and the smart phone for receiving and processing this information. The implemented system has the benefit to improve the lecture quality because a professor can minimize attendance checking time and spend a lot of time on the lecture.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.425-431
• /
• 2011

Thermal energy generated because of the friction between the disc and pad is transferred to both sides and causes thermal expansion of the material, which affects the contact pressure distribution. This phenomenon, which is called thermoelastic instability (TEI), is affected by the natural mode of a disc. TEI results in the formation of a hot spot and causes hot judder vibrations. In this study, three-dimensional analysis of the hot judder of a ventilated disc for automotives was performed by using the commercial finite element analysis program, SAMCEF. The intermediate processor based on a staggered approach was used to exchange the result data of the mechanical and thermal model. The hot spot was formed on the surface of the disc, and the number of hot spots was compared with the natural mode of the disc.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.100-109
• /
• 2005

A Mobile Ad-Hoc Network (MANET) supports a multi-hop wireless network without any prepared base station (BS). The MANET is capable of building a mobile network automatically without any help from DHCP servers for address allocation or routers to forward or route messages. Many routing protocols have been proposed for the MANET, but these specify the most optimized or shortest path from a source to a destination, and they assume that nodes are pre-configured before communication. To make up for this, address allocation algorithms, such as MANETConf [1] and prophet address allocation algorithm [2], have been proposed. Especially, MANETConf proposes address allocation algorithm with duplication address check. In this paper, we present a dynamic node configuration protocol based on 2-tierd hierarchical network architecture for mobile ad-hoc network, modified from [1]. Especially, it reduces the number of broadcast message exchange between nodes when a new node somes into a network, which lessens network overhead, remarkably. This protocol is based on two-tired structure, and it ensures address allocation with simple duplication address defection mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.505-511
• /
• 2005

Autonomic machines interacting with human should have capability to perceive the states of emotion and attitude through implicit messages for obtaining voluntary cooperation from their clients. Voice is the easiest and most natural way to exchange human messages. The automatic systems capable to understanding the states of emotion and attitude have utilized features based on pitch and energy of uttered sentences. Performance of the existing emotion recognition systems can be further improved withthe support of linguistic knowledge that specific tonal section in a sentence is related with the states of emotion and attitude. In this paper, we attempt to improve recognition rate of emotion by adopting such linguistic knowledge for Korean ending boundary tones into anautomatic system implemented using pitch-related features and multilayer perceptrons. From the results of an experiment over a Korean emotional speech database, the improvement of $4\%$ is confirmed.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.203-208
• /
• 2019

Medical color graphic research will serve as the basis for globally expanding and disseminating the design quality of the company's products through the era of production of medical robots. This study was based on technologies and contents suitable for the era of medical robot bed expansion, universal medical color application, ergonomic color, etc. In addition, the medical bed robot's color research direction was presented from the perspective of universal design. Accordingly, a universal color design was proposed, taking the functions of a medical robot under development by a domestic company as an example. The characteristics of this robot bed can be divided into three types of functions: first, treatment characteristics for prevention of pressure ulcers with curative, second, automatic seat exchange with cleanliness for medical environment, and third, Convenient, which can implement patient transport. The main idea is to present a combination of functional colors appropriate for this. The resulting color analysis and universal color design techniques could be a useful methodology for illustrating the appearance and function of a modern medical robot bed.

• Journal of Space Technology and Applications
• /
• v.2 no.2
• /
• pp.121-136
• /
• 2022

Automatic Identification System used in ship communication is required for marine control way, including monitoring of vessel operation in coastal and exchanging of information for safety navigation between them. But, it uses a very high frequency band of approximately 160 MHz, and at the same time, due to the curvature of Earth, there is a limit to the communication distance. Several demonstrations were made successfully over satellite, but not much work has been done yet through cube-satellite which has low-orbit at 500 km altitude. Here, we demonstrate a reception test of AIS (automatic identification system) receiver for a cube-satellites using software-defined radio (SDR). We collected AIS data from ship at port of Busan, Korea, using R8202T2 SDR and established to transmit them using Adam-Pluto and Matlab Simulink. The process of weakening the signal strength to a satellite was constructed using attenuator. Through above process, we demonstrated whether AIS data was successfully received from the AIS payload.