• Journal of computational fluids engineering
• /
• v.1 no.1
• /
• pp.9-18
• /
• 1996

This study examines effect of various interpolations of interior control function for analytic methods such as Thomas-Middlecoff and Sorenson methods. Laplace interpolation is developed and compared among linear interpolation and exponential interpolation systematically.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.104-109
• /
• 1995

This study examines effect of various interpolations of interior control function for analytic methods such as Thomas-Middlecoff and Sorenson methods. Laplace interpolation is developed and compared among linear interpolation and exponential interpolation systematically.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.2
• /
• pp.94-104
• /
• 2002

As a part of scientific data visualization automatic generation algorithms for a contour map have been investigated mainly on data which are defined at every lattice point. But in actual situation like weather data measurement. it is impossible to get data defined at every lattice point This is because the exact value on every lattice point can not be obtained due to characteristics in sampling devices or sampling methods. In order to define data on every lattice point where data were not sampled an interpolation method. was applied to the sample data to assign approximate values for some lattice type data but by using the non-lattice type of sample data sets. A triangle data link was defined by using non lattice points directly based on actually sample data set, not by using the pre-processed rectangle lattice points. The suggested algorithm generates a contour map a contour map only by using sample data set which are much smaller than old one without data interpolation and there is no skew on data any more since it does not need any interpolation to get the values of the defined lattice points.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.87-96
• /
• 1993

In this study, the peak stress of a fuillet in elastic structure was optimized to have minimum value by using quadratic isoparametric element. The method of auomatic gridding was also developed along with shape algorithm and design element technique was adopted in selecting design variables. The computer program developed was combined with the Hooke-Jeeves direct algorithm of optimization techniques in order to minimize the peak stress of the fillet. The imployment of design element technique significantly cut down computer time by the reduction in design variables, and the opitmum fillet shape with uniform minimum stress was obtained by varying design variables along x and y directions in improving the shape compared to other results. By using automatic gridding, in which Bezier surfaces and Coons surfaces of cubic interpolation were employed, the irregular boundary was removed resulting in smoother anbd more accurate fillet shape possessing uniform minimum stress.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.210-210
• /
• 2021

Delft Dashboard는 유동모델을 위한 오픈소스 프로그램으로 로컬 및 글로벌 데이터 세트를 사용하여 다수의 입력 매개변수를 신속하게 생성, 편집하고 모델 내 입력을 시각화하도록 설계된 그래픽 사용자 인터페이스(GUI) 이다. 특히 Delft Dashboard에 제공하는 개방경계조건을 이용하면 격자영역을 인식하여 개방경계를 자동으로 분배 및 지정하고, 각 개방경계 위치에서 분조별 조석조화상수 값도 산출되므로 유동 모델의 편의성을 증대시킬 수 있지만 상황에 따라 적합하게 경계를 분배하여 개방경계로 지정하는 것이 중요하다. 본 연구에서는 Delft Dashboard에서 제공하는 개방경계조건 중 TPXO 8.0을 이용한 Delft-3D 해수유동 수치모의를 수행하여 개방경계조건이 결과에 미치는 영향을 분석하였다. TPXO 8.0의 경우 격자영역에서 개방경계조건을 설정할 때 사용자가 경계조건에 포함될 격자 수를 지정하면 전체 격자경계에서 격자 수에 해당하는 만큼 경계를 나누어 개방경계를 지정하고 각 개방경계 위치에서의 분조별 조석조화상수값을 산출한다. 특히 격자 수에 따라 개방경계로 지정되는 정도에 따른 영향을 분석하기 위하여 인위적으로 경계를 다양하게 분배하여 개방경계를 지정한 후 수치모의에 적용하였다. 수치모의는 동해안 고리원전 인근을 대상으로 격자 생성 후 Delft Dashboard TPXO 8.0을 이용하여 전술된대로 다양한 개방경계조건을 생성하였고 이를 Delft-3D내 적용하여 해수유동 모의를 수행하였다. 각 개방경계 조건별 초기 수면 변위 분석 및 인근 조위관측소의 관측값의 비교를 통해 개방경계조건이 모의결과에 미치는 영향을 분석하였다.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2003.05a
• /
• pp.41-44
• /
• 2003

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.68-73
• /
• 2007

Computational Fluid Dynamics (CFD) approach is now playing an important role in the engineering process in these days. Generating proper grid system in time for the region of interest is prerequisite for the efficient numerical calculation of flow physics using CFD approach. Grid generation is, however, usually considered as a major obstacle for a routine and successful application of numerical approaches in the engineering process. CFD approach based on the unstructured grid system is gaining popularity due to its simplicity and efficiency for generating grid system compared to the structured grid approaches, especially for complex geometries. In this paper an automated triangular surface grid generation using CAD(Computer Aided Design) surface data is proposed. According to the present method, the CAD surface data imported in the STL(Stereo-lithography) format is processed to identify feature edges defining the topology and geometry of the surface shape first. When the feature edges are identified, node points along the edges are distributed. The initial fronts which connect those feature edge nodes are constructed and then they are advanced along the CAD surface data inward until the surface is fully covered by triangular surface grid cells using Advancing Front Method. It is found that this approach can be implemented in an automated way successfully saving man-hours and reducing human-errors in generating triangular surface grid system.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.9-15
• /
• 2023

The task of generating a reduced thermal model of a satellite must be performed at least once in a satellite project to shorten the time of orbital thermal analysis and perform thermal analysis coupled to a launch vehicle. Although there are various methods for generating a reduced thermal model, an intuitive and convenient iso-thermal mesh generation method is used the most widely in practice. However, there is still a lack of research on automation of the isothermal mesh generation method. In this paper, we proposed an automated generation method of satellite reduced thermo-mathematical model based on the isothermal mesh generation method considering temperature tolerance and fixed nodes. The proposed method was validated using three different temperature tolerance cases. The average temperature difference satisfied the guidelines of ECSS.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.157-165
• /
• 1994

A general-purpose program for automatic two-dimensional finite-element modelling with quadrilateral elements was developed in this research. The conventional looping method employed in the program was introduced with emphasis on a new splitting criterion and a splitting scheme developed for improving the method. Some application examples were given, which show versatility and applicability of the developed program.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1926-1932
• /
• 2001

In this second part of the paper, the automatic mesh generation and remeshing algorithm using bubble packing method is applied to the nonlinear problem. The remeshing/refinement procedure is necessary in the large deformation process especially because the mesh distortion deteriorates the convergence and accuracy. To perform the nonliear analysis, the transfer of state variables such as displacement and strain is added to the algorithm of Part 1. The equilibrium equation based on total Lagrangian formulation and elasto-viscoplastic model is used. For the numerical experiment, the upsetting process including the contact constraint condition is analyzed by two refinement criteria. And from the result, it is addressed that the present algorithm can generate the refined meshes easily at the largely deformed area with high error.