• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.57-62
• /
• 2009

This paper deals with the optimal design of a shield plate in order to minimize Extremely-Low-Frequency(ELF) magnetic fields generated from three-phase bus bars. Combining an evolutionary strategy with a 3D finite element analysis tool, the main dimensions of the shield plate are sought out. The optimization procedure consists of two separated design stages to take into account all foreseen structures of the plate. In the first stage, the basic dimensions of the plate are optimized including the distance between the plate and the bus bars. Then the usefulness of the additional structures such as a slit and fillet is investigated in the second stage. Finally the optimum design of the shield plate is suggested from the viewpoint of the shielding effectiveness and manufacturing cost.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.430-438
• /
• 1992

본 논문은 단로기의 조작 또는 전력기기의 고장시에 흐르는 급준성 대전류에 의하여 발생하는 자계의 측정이 가능한 새로운 센서의 개발에 대하여 기술한다. 동축케이블을 이용한 자기적분형 자계센서의 동작원리 및 설계방법 등에 대하여 이론적으로 해석하고 인가된 자계에 대한 센서응답을 정확하게 결정할 수 있는 교정실험을 수행하였다. 또한 센서의 동작원리에 상응하는 이론적 모델을 제안하였다. 시제작된 자계센서는 적분저항의 증가와 더불어 감지전압이 상승하고 감쇠시간은 줄어드는 특성을 나타내었다. 과도대전류에 의하여 유발되는 방사자계는 거리의 제곱에 반비례하는 특성을 보였으며 전자기기의 보호를 위한 전자차폐장치의 설계시 방사자계성분에 대한 영향을 고려하여야 됨을 확인하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.179-180
• /
• 2018

자계 검출 센서는 여러 가지 종류가 있으나 벽면에 흐르는 미소 자계 및 차폐 전선에서 검출이 가능한 구조는 초전도 양자 간섭 소자(SQUID)가 주로 사용되지만 가격 및 물성 재료 특성으로 인하여 특수 용도로 사용되고 있다. 이에 본 연구에서는 전선으로부터 발생되는 저주파 자장을 검출할 수 있고 휴대성 및 가격이 저렴한 구조인 코일형 자계측정기를 개발하기 위해 자기 코어 및 코일 Turn수 변화에 따른 자계 검출 감도를 조사하여 최적의 구조를 설정하였다.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.45-48
• /
• 1993

High-order field gradients are useful for spatial localization of a volume of interest and dynamic range improvement of signal detection in NMR (Nuclear Magnetic Resonance) spectroscopy and imaging. This paper proposes a design method of shielded high-order gradient coils to reduce tile effect of eddy current on tile spectroscopy and imaging results. According to the experimental results, the shielded gradient coils produce less than 2 % eddy current compared to non-shielded coils. Two shielded $z^2$ gradient coils have been designed and constructed for 1.5 T whole-body and 3.0 T animal NMR imaging systems. Experimental results are in good agreement with the theoretically expected behavior and show the utility of the shielded high-order gradient coils.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.124-128
• /
• 2010

In this paper, the shielding effectiveness of aluminum shielded room with using eddy-current is calculated and measured after fabricated. The size and thickness of shielded room are decided as $2.4{\times}2.4{\times}2.4[m^3]$ and 12[mm] after AC shielding characteristics by eddy-current of conductive materials is analyzed. To verify the shielding effectiveness, a rectangular helmholtz coil is fabricated to generate magnetic field of 1.37[${\mu}T$] and measured magnetic field inside shielding room for 0.01~10[Hz]. According to calculations and measurements, AC Shielding effectiveness by eddy-current in aluminum is very small for 0.01~2[Hz] and 5 times to 11 times for 5~10[Hz].

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.547-551
• /
• 2003

This paper presents the magnetic fields shielding properties of the light rail transit which are produced by the ripple-shaped currents in the power lines. To analyze these properties, the equivalent circuit model of the DC power supply system at the light rail transit system was induced by MATLAB-SIMULINK, and with the calculated results of the ripple-shaped currents, the magnetic fields shielding properties of the light rail transit were analyzed. The results are as follows. First The frequency of the ripple-shaped currents is 200[Hz] and its magnitude is 1.5[A]. Second the magnetic fields produced by the ripple-shaped currents of the DC power supply systems are well shielded by the aluminum made body of the light rail transit.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.945-947
• /
• 2005

변압기, 케이블, 한류기와 같은 고온초전도 선재의 전력기기의 개발과 응용에 있어서 교류손실은 기기의 운용과 효율에 밀접한 관계가 있기 때문에 중요한 연구 분야가 되고 있다. 또한 현재 전력기기에 응용 하고 있는 고온초전도 선재는 전력기기에 필요한 통전용량을 수용 할 수 없기 때문에 이를 해결하기 위한 방법으로 선재를 적층하여 통전용량을 증대시키는 다양한 방법이 연구되고 있다. 본 논문에서는 고온초전도 선재의 적층배열을 달리 하였을 때, 외부자계에 의한 고온초전도 선재의 자화손실 특성에 대해서 연구하였다. 선재의 적층 배열의 형상은 Edge-to-Edge, Face-to-Face형과 Matrix형이며, 적층배열에 사용한 선재의 개수는 2, 4, 8개이다. 연구결과, 동일한 적층 수의 조건하에서 Face-to-Face형의 적층배열이 다른 종류의 배열보다 자화손실이 낮음을 확인하였고, 이는 Face-to-Face 형태로 적층 될 때 인접선재로 인한 자기차폐효과가 다른 배열의 경우보다 우수하기 때문으로 보인다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.2
• /
• pp.103-107
• /
• 2008

Purpose: This paper describes a electron field presence of magnetic field, intensity and shape surface dose variation to clinical application possibility. Materials and Methods: The using 6 MeV electron and $10{\times}10\;cm^2$ field size, 9 hole to shielding block make the by measure the film, when the magnetic field position inside and outside of the X-Omat film and parallel plate ionization chamber using the surface dose measured. Results: Present of 4 cm to the side at angle about 3 degree from beam center, use of ring type magnetic is 0.9% increase the surface dose, lens block located in the magnetic field the surface dose 1.58% increase, half magnetic field's position on the side of them at the field center of the 3.6% increase of the surface dose. Conclusion: Surface dose variation is with magnetic field about the mean electron beam of progress direction change, orbit region patient's is inconvenient without surface dose increase percentage case goodness will be used as a useful way.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2008

We have manufactured and evaluated reference samples for the use of low magnetic moment measurements. Before the measurements, SQUID magnetometers were magnetically shielded from external magnetic noise. We considered the purity including magnetic impurities, the optimum thickness, the modification method, and the shape in the preparation of the samples. Three paramagnetic polycrystaline metal plates of Ti, W, and Al with the area of $4mm{\times}6mm$ were prepared finally. The magnetic moments of these three samples are measured very linear up to the field of 5 T without magnetic hysteresis. The temperature deviated ratios of the magnetic moments for Ti, Al, and W from 290 K to 310 K are 0.7, 1.5, and 0.1 %, respectively. The measured magnetic moments for Ti and W samples by our research team are very well agreeable with those by two SQUID magnetometers and a VSM at Quantum Design via international round robin test. The results suggest that the prepared reference samples are well suited for the use in the low magnetic moment measurement with SQUID based magnetometers.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.201-209
• /
• 2016

The object of this study was to evaluate the separation distance from a temporary storage facility satisfying the dose criteria. The calculation of ambient dose rates took into account cover soil thickness, facility size, and facility type by using MCNPX code. Shielding effects of cover soil were 68.9%, 96.9% and 99.7% at 10 cm, 30 cm and 50 cm respectively. The on-ground type of storage facility had the highest ambient dose rate, followed by the semi-ground type and the underground type. The ambient dose rate did not vary with facility size (except $5{\times}5{\times}2m\;size$) due to the self-shielding of decontamination waste in temporary storage. The separation distances without cover soil for a $50{\times}50{\times}2m\;size$ facility were evaluated as 14 m (minimum radioactivity concentration), 33 m (most probably radioactivity concentration), and 57 m (maximum radioactivity concentration) for on-ground storage type, 9 m, 24 m, and 45 m for semi-underground storage type, and 6 m, 16 m, and 31 m for underground storage type.