• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.201-205
• /
• 2003

The optimum autolysis conditions were investigated to prepare yeast autolyzate (extract) using yeast slurry collected from brewery plants. Brewers yeast slurry was washed with caustic soda to eliminate bitter hof substances attached to yeast cell walks. The pH of brewers yeast slurry was adjusted to 9.8 with caustic soda, and centrifuged at 3,000 rpm for 5 min. The supernatant was discarded, and the bottom cake was rehydrated and collected. Bitterness unit (BU) of washed yeast slurry was 24.1 BU, below the threshold value of 25.0. Yeast extract could be obtained from washed brewers yeast slurry at maximum yield up to 38% by autolyzing at pH 6.8 and $53^{\circ}C$ for 20 h.

• 대한관절경학회:학술대회논문집
• /
• 2009.10a
• /
• pp.165-169
• /
• 2009

연골 결손은 자체 치유 능력이 적어 그 크기가 1 cm 이상인 경우 골관절염이 발생할 수 있다. 최근에는 3-tesla MRI 등의 발전으로 인해 수술 전에 미리 연골 손상을 정확히 진단할 수 있어 연골 손상의 치료를 더욱 적극적으로 할 수 있다. 이제까지 연골 손상에 대한 수술적 치료는 세척술(lavage) 및 변연 절제술(debridement), 미세 천공술(microfracture), 자가 골연골 이식술(autologous osteochondral graft), 자가 연골 세포 이식술(autologous chondrocyte implantation, ACI), 동종 골연골 이식술(osteochondral allograft)이 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.1-8
• /
• 2023

Marine and hydraulic structures are subject to durability damage not only due to the penetration of sea water but also due to the attachment of marine organisms. Therefore, in this study, we tried to develop an antifouling coating agent with self-cleaning function for marine concrete. It was confirmed that the antifouling coating agent mixed with AKD, cellulose nanofibers and BADGE had sufficient antifouling performance at a well hydrophobicity of around 140° in contact angle and an inclination angle of 15°. In the abrasion resistance test of the surface, only a maximum loss of 0.015 g occurred. In the durability test, as a result of the chloride ion permeation test, almost no chloride ion permeation occurred in the variable where the coating agent was applied, and carbonation and freeze-thaw damage also rarely occurred, so it was analyzed that it was effective in securing durability of concrete.

• Electronics and Telecommunications Trends
• /
• v.4 no.4
• /
• pp.3-16
• /
• 1989

전파는 통신, 방송, 고주파 가열 및 세척, 의료진단 및 치료, 원격검침, 방향탐지 등의 다양한 부문에서 널리 활용되고 있다. 전파가 지닌 이러한 경제적 가치에도 불구하고 전파이용자가 부담하는 제비용은 그가 전파이용으로부터 얻는 경제적, 문화적 편익과는 무관하게 책정되어 있다. 따라서 본고에서는 전파자원의 합리적 이용을 위한 방안으로서 전파이용자가 전파관리에 드는 비용을 적절히 부담할 수 있도록 하는 방안에 대해 논의하였다. 이를 위하여 본고에서는 우선 전파가 지닌 개념 및 특성을 검토하고 국내의 다른 부문에 대한 부과사례 및 외국의 전파관련 부과사례 등을 조사분석한 후 전파에 대한 경제적 부과의 타당성 및 부과명목 등을 논의하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.2
• /
• pp.120-129
• /
• 2023

Marine structures are subject to damage not only from sea salt but also from the adhesion of marine microorganisms and suspended particles, which cause additional damages. In order to prevent this, periodic coating is employed in the case of vessels to maintain the necessary performance. However, it is true that periodic coating is difficult for concrete or steel support structures, and there is a risk of marine environmental pollution. In this study, authors developed an anti-fouling coating agent using eco-friendly materials that possess hydrophilic cellulose nanofibers and AKD(alkyl ketene dimer). To achieve a homogeneous mixture, the content of cellulose nanofibers was fixed at 1 %, and AKD, distilled water, and waste glass were mixed using a digital mixer and homogenizer. The contact angle of the prepared coated surface was observed to be over 130°, indicating sufficient performance even in a water droplet flow test with a 15° slope, suggesting self-cleaning capability. Furthermore, through the analysis of viscosity characteristics at different temperatures, it was confirmed that the application is feasible at room temperature. Microstructure analysis also verified that the coating agent is uniformly applied to the concrete surface.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.4
• /
• pp.441-451
• /
• 2014

The flushing is important to maintain good water quality in water main. It is a technique of using water velocity to remove sediments in water distribution system. The variety of water quality problems can occur in a distribution system, so too can a variety of benefits be gained by system flushing. In order to effectively perform the flushing, the contaminants to be removed to set up and it can be solved, it is necessary to ensure the proper flow rate. In this study, the removal of contaminants present in the inner water pipe attached loose deposits such as fine particles of granular activated carbon, sand and iron corrosion product sought to derive flow rates. Thus, the constant observation of using pilot plant scale water distribution plant for the movement of floating characteristics of particles were assessed.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.123-129
• /
• 2021

Many plants and animals in nature have superhydrophobic surfaces. This superhydrophobic surface has various properties such as self-cleaning, moisture collection, and anti-icing. In this study, the superhydrophobic properties of PTFE surface were treated by plasma etching. There were four important factors that changed the surface properties. Micro-sized protrusions were formed by plasma etching. The most influential parameter was RF Power. The contact angle of the pristine PTFE surface was about 113.8°. The maximum contact angle of the surface after plasma treatment with optimized parameters was about 168.1°. In this case, the sliding angle was quite small about 1°. These properties made it possible to remove droplets easily from the surface. To verify the self-cleaning effect of the surface, graphite was used to contaminate the surface and remove it with water droplets. Graphite particles were easily removed from the optimized surface compared to the pristine surface. As a result, a surface having water repellency and self-cleaning effects could be produced with optimized plasma etching parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.9-11
• /
• 2009

열전박막은 유비쿼터스 센서 네트워크에서 사용될 초소형 자가발전 장치로 각광받고 있다. 본 실험에서 는 상온에서 주로 사용되는 $BiSbTe_3$ 열전물질을 유기 금속화학 증착법(MOCVD)을 이용하여 (0001) Sapphire기판 위에 성장하였다. 일반적으로 사용되는 기판의 세척 및 에칭과정을 거쳐 성장된 $BiSbTe_3$ 박막의 표면형상은 부분적으로 성장되지 않으며 불규칙한 결정립을 포함하는 박막의 형상을 나타내었으나 성장 전 기판의 표면처리 통하여 성장된 박막의 표면 형상을 크게 개선시킬 수 있었다. 이는 표면처리를 통하여 기판표면에 미세 결함을 형성 시켜 초기 박막성장 시 핵생성이 용이하도록 하였기 때문으로 해석되었다. 이러한 표면 처리기법은 성장된 박막의 열전 특성에 크게 영향을 끼치지 않았다. 따라서 다양하고 저가의 박막형 열전소자의 제작에 응용될 수 있을 것으로 기대된다.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.183-190
• /
• 2020

This study was designed to investigate the current state of lens wearing and care, and to investigate eye discomfort according to the care method. Data of 209 female college students wearing lenses for more than 1 year were analyzed using the SPSS / WIN 22.0 program. 40.2% of female students wear lenses every day and 97.1% wear all day. However, only 45.4% of students washed it daily, and only 17.7 % used protein remover during wash, which resulted in poor management. 98.1% of students complained of discomfort due to the lens, and the Ocular Surface Index (OSDI) scored 42.88 ± 15.25, which was classified as a severe dry eye and threatened eye health. Therefore, it is necessary to improve students' awareness of lens management, and periodical lens inspection and management education are needed.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.198-206
• /
• 2000

Background : Pulmonary complications following bonemarrow transplantation (BMT) are common and associated with a high mortality rate. We investigated the yield, safety, and impact of fiberoptic bronchoscopy (FOB) for diagnosis of postBMT pneumoniae. Methods : From May 1997 to April 2000, 56 FOBs were performed in 52 post BMT patients for clinical pneumoniae. BMT patients with respiratory symptoms and/or pulmonary infiltrates had a thoracic HRCT(high resolution computed tomography) and bronchoscopic examination including BAL (bronchoalveolar lavage), TBLB (transbronchial lung biopsy), PSB (protected specimen brush). Results : The characteristics of the subjects were as follows : 37 males, 15 females, mean age of 31.3 years(l7-45), 35 sibling donor allogenic BMTs, 15 nonrelated donor allogenic BMTs, and 2 autologous BMTs. Fiftynine percent of FOBs (33 FOBs, 31 patients) were diagnostic. Isolated pathogens included the following : 12 cytomegalovirus (CMV) (21.4 %), 7 pneumocystis carinii (PC) (12.5 %), 11 CMV with PC (19.6 %), 2 Mycobacaterium tuberculosis (3.6%), and 1 streptococcus (1.8%). Most of the radiographic findings were diffuse interstitial lesions. CMV pneumoniae had mainly diffuse interstitial nodular lesion, and PC pneumoniae had diffuse, interstitial ground glass opacity(GGO). When CMV was accompanied by PC, a combined pattern of nodular and GGO was present. Of the 56 cases (23.2%), 13 died of CMV pneumoniae (n=2), PCP (n=2),mixed infection with CMV and PC (n=3), underlying GVHD (n=1), underlying leukemia progression (n=1), or respiratory failure of unknown origin (n=4). There was no major complication by bronchoscopy. Only 3 cases developed minor bleeding and 1 episode temporary hypoxemia. Conclusion : Based on our findings, CMV and PC are the major causes of postBMT pneumoniae. In addition, BAL can be considered a safe and accurate procedure for the evaluation of pulmonary complications after BMT.