• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1003-1009
• /
• 2009

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. This As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents and database design. Also, I suggested that U-city using railway modeling about matching methods of high density elevation value using 3-D aerial photo with laser data are best approach for detail stereo modeling and simulation.

• Economic and Environmental Geology
• /
• v.38 no.4 s.173
• /
• pp.369-380
• /
• 2005

This study describes image-based approach for efficient and objective evaluation method of the rock slope stability. Three-dimensional rock slope model was reconstructed by processing stereo digital images. The model provided fundamental information for geospatial analysis of the rock slope. Methods to extract three-dimensional information about discontinuity on the rock slope and to estimate roughness of the rock surfaces were suggested. The results show that stereo digital images have potential to provide information for both quantitative and qualitative analysis of rock slope. In addition, visualization of the results increases efficiency and benefit in evaluating rock slope stability.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.3
• /
• pp.59-67
• /
• 2019

In this study, the UAV (Unmammed Aerial Vehicle) was applied for the photogrammetry of the construction site and the safety management of steel pipe scaffold. The research site is a temporary facility for building reinforcement on Samcheok Campus of Kangwon National University. The installation condition of the steel pipe scaffold was investigated, and the pillar distance, the beam distance and the wale distance were surveyed. As a result, it was found that the beam distance of the scaffold in the longitudinal direction was in good agreement with the standard, but the pillar distance and the wale distance were found to be less than the standard. Three-dimensional data can be used in drone shooting to enable three-dimensional measurement, so that it is possible to measure facilities hidden or located inside other facilities. Through the drone shooting, the condition of the site can be quickly recorded and the surveying can be carried out without interfering with the work of the field personnel. Although the installation of the temporary structure must be strictly observed to ensure the safety of the workers, it is found that the installation standards are still neglected in the field. In order to prevent this practice, it was thought that the legal system should be supplemented so that it could be checked periodically by using UAV in the field process management.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1139-1149
• /
• 2017

Measuring tree's volume is very important input data of various environmental analysis modeling However, It's difficult to use economical and equipment to measure a fragmented small green space in the city. In addition, Trees are sensitive to seasons, so we need new and easier equipment and quantification methods for measuring trees than lidar for high frequency monitoring. In particular, the tree's size in a city affect management costs, ecosystem services, safety, and so need to be managed and informed on the individual tree-based. In this study, we aim to acquire image data with UAV(Unmanned Aerial Vehicle), which can be operated at low cost and frequently, and quickly and easily quantify a single tree using SfM-MVS(Structure from Motion-Multi View Stereo), and we evaluate the impact of reducing number of images on the point density of point clouds generated from SfM-MVS and the quantification of single trees. Also, We used the Watertight model to estimate the volume of a single tree and to shape it into a 3D structure and compare it with the quantification results of 3 different type of 3D models. The results of the analysis show that UAV, SfM-MVS and solid model can quantify and shape a single tree with low cost and high time resolution easily. This study is only for a single tree, Therefore, in order to apply it to a larger scale, it is necessary to follow up research to develop it, such as convergence with various spatial information data, improvement of quantification technique and flight plan for enlarging green space.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.511-516
• /
• 2004

수치표고모델, 정사영상과 같은 공간영상정보를 구축하기 위해서는 입체영상을 이동한 영상정합(image matching)의 과정이 필수적이며, 단영상 또는 스테레오 영상을 이용하여 대상물의 3차원 정보를 재구성하고 복원하는 기술은 사진측량 및 컴퓨터 비전 분야의 주요 연구 중의 하나이다. 본 연구에서는 화소값의 유사성과 상호관계성을 고려하는 MRF 모델을 이용하여 영상정합을 수행하였다. MRF 모델은 공간분석이나 물리적 현상의 전후관계(contextural dependencies)의 분석을 위한 확률이론의 한 분야로 다양한 공간정보를 통합할 수 있는 방법을 제공한다. 본 연구에서는 기준영상의 화소에 시차를 할당하는 접근 방법으로 확률모델의 일종인 마르코프 랜덤필드(MRF)모델에 기반한 영상정합기법을 제안하였고, 공간내 화소의 상호관계를 고려해주므로 대상물의 경계부분에서의 매칭 정확도를 향상시켰다. 영상정합문제에서의 MRF 기본가정은 영상 내 특정화소의 시차는 그 주위화소의 시차에 의한 부분정보에 따라 결정이 가능하다는 것이다. 깁스분포(gibbs distribution)를 사용하여 사후(posteriori) 확률값을 유도해내고, 이를 최대사후확률(MAP: Maximum a Posteriori)추정법을 이용하여 에너지함수를 생성하였다. 생성된 에너지함수의 최적화(Optimization)를 위하여 본 연구에서는 전역최적화기법인 multiway cut 기법을 사용하여 영상정합에 있어 에너지함수를 최소로 하는 이미지화소에 대한 시차레이블을 구하여 영상정합을 수행하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.97-104
• /
• 1999

Digital elevation models(DEMs) represent an important data base for orthophoto generation The quality of a DEM depends on the geometrical accuracy of the original point or line data. This study analyzes the effects of grid space and scanning resolution in DEM creation with image matching method. The less standard deviation of DEM error was introduced when we adopted small grid space, but no effects in scanning resolution. Based on the bias error analysis of the DEM, we found that the error of a large scale of aerial photograph was bigger than that of a small scale case, and that such error mainly came from the closed area in large scale photographs. In order to reduce the closed area, the experiment has been conducted using multi scale and different overlap of aerial photo images. The result shows that the size of closed area and the shaded area has been dramatically decreased due to the adoption of multi scale aerial images instead of a couple of stereo images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.93-102
• /
• 1991

This study aims to develop techniques for generating Digital Elevation Model(DEM) from SPOT Computer Compatible Tape(CCT) data, so as to present an effective way of generation of DEM for large area. As the first phase of extracting ground heights from SPOT stereo digital data, the bundle adjustment technique was used to determine the satellite exterior orientation parameters. Because SPOT data has the characteristics of multiple perspective projection, exterior orientation Parameters were modelled as a function of scan lines. In the second phase, a normalized cross correlation matching technique was applied to search for the conjugate pixels ill stereo pairs. The preliminary study showed that the matching window size of 13$\times$13 was adequate. After image coordinates of the conjugate pixels were determined by the matching technique, the ground coordinates of the corresponding pixels were calculated by the space intersection method. Then DEM was generated by interpolations. In addtion an algorithm for the elimination of abnormal elevation was developed and applied. The algorithm was very effective to improve the accuracy of the generated DEM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.687-695
• /
• 2011

Many internet portals provide maps with spatial information services. Recently, various images including aerial, satellite, street view, and photo-realistic 3D city models are provided as well as maps. This study suggested a method for geometric correction of the panoramic aerial images in the internet portal and 3D building modeling using information which is available in the internet. The key of this study is to obtain all necessary data easily from internet without restrictions. Practically, the ground control coordinates could be available from geo-referenced internet maps, and stereo pairs of the aerial images and close-range photographs for photo-realistic object modeling are provided by the internet service. However, the ground control points are not suitable for accurate mapping. RMSE of the plotting was about 9 meters and reduced upto 4 meters after coordinate transformation. The proposed methods would be applicable to various applications of photo-realistic object modeling which do not require high accuracy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.42-52
• /
• 2010

The purpose of this study is to produce digital elevation model (DEM) in the Jebu tidal flat, one of the west coast of the Korean Peninsula, by means of photogrammetric techniques from aerial digital stereo-images. Produced DEM would be become the fundamental data for change detection of the sediment and erosion. To do so, epipolar line is established by relative orientation. Area-based matching is then carried out based on this line and matching size according to surface property of tidal flat after a classified image is produced from reflectance and texture of the surface. As the results, DEM generated by the proposed method showed subtle changes in height more precisely than DEM using the fixed matching size and DEM by the commercial S/W in the region, such as tidal flats having few level differences.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.5
• /
• pp.664-675
• /
• 1998

The purpose of this study was to isolate the observational error included in plane photogrammetric data and suggest more accurate and suitable method for body shape measurement. Three experiments were carried out in this study. First of all, the variables which can be obtained from photogrammetric method were selected among the data which can be measured improperly by direct measurement or showing large deviations between the samples. Secondly, the height, the width and the depth of 50 subjects were measured by plane photogrammetry. The result showed that plane photogrammetric data contain significant observational error even for the same variables, as the angle of which photos had been taken changes. Therefore, in order to reduce the observational error and to measure the human body accurately, three-dimensional measurement, stereo photogrammetry was employed in the last experiment. As it is important to isolateonly the observational error by plane photogrammetry and to exclude the accidental error caused by movement of human body subject, body shape model(manikin) was used as subject. The result showed that the average observational error by plane photogrammetry was more than 4 cm in the height, 0.85-1.29cm in the width and 0.49cm in the depth. In conclusion, it is not adequate to use the height obtained from plane photogrammetric data as human body measurement data. And the width and the depth should be used cautiously, even though they are relatively less significant, the error still can make some difference on clothing construction.