• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.249-249
• /
• 2019

하천에서 하상과의 접촉 없이 부유 상태로 이동하는 유사는 부유사로 정의된다. 부유사의 이동은 유사 입자의 침강 속도와 난류의 섭동 성분에 따라 결정된다. 실제 하천에서 부유사는 단일 크기가 아닌 여러 크기의 유사 입자가 혼재된 상태로 존재하는데, 유사의 이동을 보다 정확히 이해하기 위해서는 침강 속도를 결정하는 유사 입자 크기의 분포에 대한 이해가 요구된다. 진흙과 같은 점착성 유사의 경우에는 모래와 같은 비점착성 유사와는 달리 입도 분포를 구성하는 유사 입자의 크기가 끊임없이 변화한다. 이러한 유사의 특성 변화는 유사 알갱이 표면의 전자기적 점착력으로 인한 응집 현상(Flocculation Process)에서 기인한다. 응집 현상으로 인해 점착성 유사는 물과 유사 입자의 덩어리인 플럭(Floc)을 형성하며, 플럭의 특성은 지속적으로 변화한다. 따라서 점착성 유사의 이동을 이해하기 위해서는 흐름 특성 및 입도 분포뿐만 아니라 플럭의 응집 현상에 관한 이해가 함께 이루어져야함을 알 수 있다. 본 연구에서는 플럭의 응집 현상으로 인한 크기 변화와 입도 분포를 이해하기 위한 모형 개발의 방법론을 제시하고자 한다. 입도 분포 모형의 개발을 위해 추계학적 접근법이 이용되며, 추계학적 접근법을 이용하여 수치 실험을 수행하기 위해 몬테-카를로 방법이 적용되었다. 입도 분포 모형과 유사 이동 모형의 결합을 통해 흐름 내 부유 상태로 이동하는 점착성 유사 입도 분포에 관한 수치 모형 개발이 가능하다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.307-307
• /
• 2020

하천에서 하상과의 접촉 없이 부유 상태로 이동하는 유사는 부유사로 정의된다. 부유사의 이동은 유사 입자의 침강 속도와 난류의 섭동 성분에 따라 결정된다. 실제 하천에서 부유사는 단일 크기가 아닌 여러 크기의 유사 입자가 혼재된 상태로 존재하는데, 유사의 이동을 보다 정확히 이해하기 위해서는 침강 속도를 결정하는 유사 입자 크기의 분포에 대한 이해가 요구된다. 진흙과 같은 점착성 유사의 경우에는 모래와 같은 비점착성 유사와는 달리 입도 분포를 구성하는 유사 입자의 크기가 끊임없이 변화한다. 이러한 유사의 특성 변화는 유사 알갱이 표면의 전자기적 점착력으로 인한 응집 현상(Flocculation Process)에서 기인한다. 응집 현상으로 인해 점착성 유사는 물과 유사 입자의 덩어리인 플럭(Floc)을 형성하며, 플럭의 특성은 지속적으로 변화한다. 따라서 점착성 유사의 이동을 이해하기 위해서는 흐름 특성 및 입도 분포뿐만 아니라 플럭의 응집 현상에 관한 이해가 함께 이루어져야함을 알 수 있다. 본 연구에서는 플럭의 응집 현상으로 인한 크기 변화와 입도 분포를 이해하기 위한 모형 개발의 방법론을 제시하고자 한다. 입도 분포 모형의 개발을 위해 추계학적 접근법이 이용되며, 추계학적 접근법을 이용하여 수치 실험을 수행하기 위해 몬테-카를로 방법이 적용되었다. 입도 분포 모형과 유사 이동 모형의 결합을 통해 흐름 내 부유 상태로 이동하는 점착성 유사 입도 분포에 관한 수치 모형 개발이 가능하다.

• Journal of Korea Water Resources Association
• /
• v.40 no.9
• /
• pp.723-734
• /
• 2007

This study was to investigate the settling velocity which is an important factor for the prediction of cohesive deposition under the various densities of particle and dissolved ion addition$(Na^+,\;Cl^-,\;OH^-,\;H^+)$ in rivers, ports, reservoirs and lakes. Settling velocity of suspended fine particles in still water was measured with a pressure sensor (maximum 10 mbar). At the initial concentration of 20g/l of alumina and quartz the average settling velocities were high due to the aggregation behaviour of particles. At this point it was 0.185 mm/s (alumina) and 0.022 mm/s (quartz). Above this initial concentration it was on the decrease owing to the hindered settling. The higher the salinity is, the faster the settling velocity of alumina and quartz is. Furthermore, in an acid condition the average settling velocity of alumina was on the decrease. In an alkaline water, which causes strong flocculation, the average settling velocity of alumina it was observed on the increase. However, in an alkaline medium the low average settling velocity of quartz powder was measured.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.476-482
• /
• 2012

Asian dust particles are known to have sizes ranging from a few nanometers up to about a few micrometers. The environmental and health effects depend on the size of the dust particles. The smaller, the farther they are transported, and the deeper they penetrate into the human respiratory system. Sedimentation field-flow fractionation (SdFFF) provides separation of nano to microparticles using a combination of centrifugal force and parabolic laminar flow in a channel. In this study, the steric mode of SdFFF (Sd/StFFF) was tested for size-based separation and characterization of Asian dust particles. Various SdFFF experimental parameters including flow rate, stop-flow time and field strength of the centrifugal field were optimized for the size analysis of Asian dust. The Sd/StFFF calibration curve showed a good linearity with $R^2$ value of 0.9983, and results showed an excellent capability of Sd/StFFF for a size-based separation of micron-sized particles.The optical microscopy (OM) was also used to study the size and the shape of the dust particles. The size distributions of the samples collected during a thick dust period were shifted towards larger sizes than those of the samples collected during thin dust periods. It was also observed that size distribution of the sample collected during dry period shifts further towards larger sizes than that of the samples collected during raining period, suggesting the sizes of the dust particle decrease during raining periods as the components adsorbed on the surface of the dust particles were removed by the rain water. Results show Sd/StFFFis a useful tool for size characterization of environmental particles such as the Asian dust.

• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.35-42
• /
• 2007

The paved areas such as parking lots and roads are stormwater intensive landuses since they are impervious and have high pollutant mass emissions from vehicular activity. Vehicle emissions include different pollutants such as heavy metals, oil and grease, particulates from sources such as fuels, brake pad wear and tire wear. Especially, the released heavy metals can be easily absorbed on the surface area of small particulate materials because of its ionic strength. Therefore, by constructing the sedimental tank in structural BMPs as a pre-treatment facility, the particles and heavy metals both can be removed from the runoff at an instant. To understand the physico-chemical characteristics of sediments from sedimentation tank, one-year study at an infiltration trench and filtration system was conducted to quantify the metal mass absorbed on sediments with various particle sizes. The structural BMPs for this study are located in Yongin City, Kyunggido. The research results show that Cu, Zn and Pb are dominant metal compounds in the sediments. Also the metal concentrations are highest at the ranges of $425-850{\mu}m$ particle sizes. The results will provide the basic physico-chemical information of sediments to treat it as solid wastes and to determine the design criteria of sedimentation tank in structural BMPs.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2009

Export fluxes of particulate organic carbon were estimated for the first time by using $^{234}Th/^{238}U$ disequilibrium in the southwestern East Sea during August 2007. They were calculated by multiplying POC/$^{234}Th_p$ ratios of sinking particles (larger than 0.7 ${\mu}m$) obtained from 150-200 m water depths to $^{234}Th$ fluxes that were estimated by integrating $^{234}Th/^{238}U$ disequilibrium from surface to 100 m water depth. Export fluxes ranged from 14 to 505 mg C $m^{-2}$ $day^{-1}$, with the highest value at station A2 and the lowest value at station D4. Primary production was well correlated with export flux, indicating that it was a major factor controlling export flux. Export flux in the East Sea was generally higher than those estimated in the open ocean and similar to or somewhat higher than those in the continental marginal seas. Export flux/primary production (EF/PP) ratios varied from 0.29 to 0.62, with an average of 0.43 and were somewhat higher in the basin area than in the coastal area. EF/PP ratio in the East Sea was rather similar to those estimated in the North Sea and Chukchi Sea, but much higher than those in the Labrador Sea, Barents Sea, and Gulf of Lions. Therefore, the East Sea is one of the major areas where a large amount of organic carbon produced in the euphotic zone sinks into the deep layer below 200 m water depth.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.323-324
• /
• 2003

건식 침적은 오염물질의 물리 화학적 특성과 기상상태(온도, 풍속, 대기안정도 등)와 표면 특성의 함수이다. 건식 침적은 크게 가스상 침적과 입자상 침적으로 나뉘어 지며, 입자상 침적은 다시 중력침강에 주로 영향을 받는 조대입자 영역과 브라운 운동에 주로 영향을 받는 미세 입자 영역으로 나뉘어 질 수 있다. 건식 침적량은 일반적으로 이론적인 건식 침적 속도와 실측된 대기 농도로부터 추정되어지거나 혹은 대체 표면 측정과 같은 직접적인 측정방법을 이용하여 산출되어진다. (중략)

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1143-1150
• /
• 2009

This study was carried out to investigate of aerobic granulation by using sequencing batch reactor(SBR). To make aerobic granular sludge in short period of time, we used polymer. In case of SBR, we have studied on physicochemical characteristics of particle size, settling velocity, surface charge, and specific oxygen utilization rate(SOUR) depending on aerobic particle's formation. The results of running SBR with $5.4kg{\cdot}COD/m^3{\cdot}d$ of COD loading rate and 20 days reaction time showed that aerobic particle size, settling velocity, SOUR, surface charge, polysaccharide/protein(PS/PN) ratio were 2.6 mm, 1.7 cm/s, $346mg{\cdot}O_2/g{\cdot}MLVSS{\cdot}hr,\;(-)0.26{\cdot}meq/g{\cdot}MLVSS$, and 2.06 mg/mg respectively.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.609-616
• /
• 2008

The present study is concerned with a simple numerical method for estimating the hindered settling velocity of noncolloidal suspensions with bidisperse size distribution of particles. The method is based on an effective-medium theory which uses the conditional ensemble averages for describing the velocity fields or other physical quantities of interest in the suspension system with the particles randomly placed. The effective-medium theory originally developed by Acrivos and Chang[1] for monodisperse suspensions is modified for the bidisperse case. Using the radial distribution functions and stream functions the hindered settling velocity of the suspended particles is calculated numerically. The predictions by the present method are compared with the previous experimental results by Davis and Birdsell[2] and Cheung et al.[3]. It is shown that the estimations by the effective-medium model of the present study reasonably agree with the experimental results.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.26-33
• /
• 1999

Coastal sediments in polluted areas adsorb many hydrophobic pollutants such as PCBs. During environmental remediation projects like dredging, they can be resuspended and transported to less polluted areas. To assess the environmental impact, the author previously developed a mathematical model that can simulate the changes of particle size distribution (PSD) due to sedimentation, vortical dispersion and coagulation. In this research, the simulation results using this model were presented in conjunction with observed PSDs from a 2-m settling column simulating coastal environments. The simulations showed that the model predictions were in fairly good agreement with the observed data (changes of PSDs in terms of depths and times), and that the resuspended sediments coagulated during the vertical transport. So, this study showed that the developed model has a good ability to describe the very complicated phenomena of real aggregation and vortical transport dynamics of coastal sediments with various particle sizes.