• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.264-269
• /
• 2008

For the synthesis of lead chromate pigments, we investigated the characteristics of particle growth with reacting conditions in the synthetic process, the effect of additives, and its micro-capsulation. The more tiny and uniform dispersion particles could be obtained at a lower pH and diluter intial concentration. The variation range of average pigment size was increased with the agitating speed. The pigment size could be controlled by adding aluminum sulfate as an additive, which maintained the optimum particle dispersion. It was found that the optimum micro-capsulation conditions were pH 9~10 and above $90^{\circ}C$ during the micro-capsulation of lead chromate pigment, and below 0.5% humidity after micro-capsulation.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.125-126
• /
• 2008

본 연구에서는 금속 나노입자 함량에 따른 유기나노복합체에서의 광학 및 전기전도도 특성변화를 분석하였다. 유기나노복합체 전극은 전기전도성을 가리고 있는 PEDOT : PSS(poly(3,4-ethylenedioxythio- phone):poly(styrenesulfonate))나노 입자를 기반으로 하며 이 복합제에 미량의 Ag nano-particle을 첨가하여 전기전도도 특성을 향상시키는 연구를 진행하였다. Ag nano-particle은 전체 중량 대비 01 - 0.4%의 범위에서 첨가하였으며 실험결과 0.1%의 첨가 비율에서 약 5% 정도의 전기전도도 특성 향상이 확인되었다. 또한 광투과도 변화를 분석해본 결과 0.4%까지의 Ag nano-particle 첨가 비율에서는 광투과도의 비율이 크게 감소되지 않는 것으로 파악되었다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.59-63
• /
• 2002

Zinc-Magnesium borosilicate 유리에 CaF$_2$입자를 충진재로 첨가하여 혼합체의 소결거동, 결정화 거동 및 최종 소결체의 마이크로파 유전특성을 측정하였다. CaF$_2$첨가는 유리의 점도를 감소 시켜 결정화 및 수축개시온도를 감소시켰다. 이러한 CaF$_2$의 최대 첨가량은 주어진 유리조성에 있어서 15 vol. % 이었다. 이러한 소결성 및 결정화 개시온도의 변화는 모 유리와 CaF$_2$의 반응에 의한 결과로 보여지며 이 반응은 결정상의 변화나 이차상의 형성에는 영향을 미치지 않았다. 따라서 유전율 6.1에 품질계수가 40000GHz 인 CaF$_2$입자를 15 vol.% 첨가시 유전상수는 7.1에서 5.6로 품질계수는 2200에서 5000GHz로 유전특성이 향상되었고 소결온도는 75$0^{\circ}C$이었다.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.98-102
• /
• 2014

Nowadays, silk fibroin receives a lot of attention as novel natural biomaterials due to its excellent biocompatibility and biodegradability. Electrohydrodynamic spraying (EHDS) is one of the method for the preparation of micro or nanoparticles by applying high voltage to the polymer solution. In this research, we fabricated silk fibroin porous microparticles by electrohydrodynamic spraying. Poly(ethylene glycol) (PEG) was added to the fibroin solution to give pores to silk fibroin microparticles. By the addition of PEG, the microparticle size was decreased despite of the decrease in conductivity and the increase of viscosity of the spraying solution. It seems that the immiscibility of silk fibroin and PEG affected much more to the microparticle size than the conductivity and viscosity. Immersing the as-sprayed microparticles into the water removed the phase-separated PEG, and finally, porous silk fibroin microparticles were prepared. The porous silk fibroin microparticles are expected to be applied as drug carriers in drug delivery or cell carriers in tissue engineering.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.343-350
• /
• 2001

본 연구에서는 탄산화법으로 침강성 CaCO$_3$분말을 제조하고 제조된 CaCO$_3$현탁액의 분산안정성을 연구하였다. CaCO$_3$현탁액의 pH 변화와 고분자전해질 PMAA와 PAA의 첨가에 따른 입자크기, 유동학적 특성(점도), zeta potential 및 현탁액의 침강속도 등을 측정하였다. 탄산화법에 의해 약 0.1$\mu\textrm{m}$ 크기와 비표면적이 23.57$m^2$/g인 단분단 calcite형 CaCO$_3$분말을 제조하였다. pH가 11인 CaCO$_3$현탁액에 0.01 wt% PMAA가 첨가된 경우에 우수한 분산안정성을 나타내었는데 이는 CaCO$_3$입자표면에 PMAA의 흡착에 의한 electrosteric 안정화기구와 CaCO$_3$입자들 사이의 정전기적 반발력에 의한 것으로 판단된다. PMAA와 PAA 첨가량 변화에 따른 pH 6, 9, 11의 CaCO$_3$현탁액의 침전높이를 측정한 결과 PMAA와 PAA의 농도가 0.15 wt% 부근에서 분산안정성을 보였는데 이는 CaCO$_3$입자들 사이간의 분산제에 의한 뚜렷한 경계를 갖는 흡착층이 형성되었기 때문으로 생각되며 따라서 CaCO$_3$현탁액의 최적 분산안정성을 위해서는 적절한 pH 조절과 PMAA 및 PAA의 첨가가 필요함을 알 수 있다.

• Clean Technology
• /
• v.19 no.3
• /
• pp.249-256
• /
• 2013

The experiments have been performed to obtain zinc complex compound with smaller particle sizes, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation and the triboelectric charge of zinc complex-compound particle with different sizes. Reactants such as zinc chloride and 3,5-di-tert.-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Aluminium(III) chloride has been mixed in the zinc chloride solution beforehand to restrain the particle size from growing. When PEG-300 and aluminium(III) chloride are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from $5.28{\mu}m$ to $2.33{\mu}m$, which was 44.1% of $5.28{\mu}m$.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.8-13
• /
• 2012

The experiments have been performed to obtain zinc complex compound with smaller particle size, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation of different sizes of zinc complex-compound particle. Reactants such as zinc chloride and 3,5-di-tert-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Zirconium (IV) oxychloride octahydrate has been mixed in the zinc chloride solution beforehand to restrain crystals from growing. When PEG-300 and zirconium (IV) oxychloride octahydrate are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from 5.28 to 1.84 ${\mu}m$, which is 34.9% of 5.28 ${\mu}m$.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.694-702
• /
• 2014

The micron-sized ITO(indium tin oxide) particles were prepared by spray pyrolysis from aqueous precursor solutions for indium, and tin and organic additives solution. Organic additives solution with citric acid(CA) and ethylene glycol(EG) were added to aqueous precursor solution for Indium and Tin. The obtained ITO particles prepared by spray pyrolysis from the aqueous solution without organic additives solution had spherical and filled morphologies whereas the obtained ITO particles with organic additives solution had more hollow and porous morphologies with increasing mole of organic additives. The micron-sized ITO particle with organic additives was changed fully to nano-sized ITO particle whereas the micron-sized ITO particle without organic additives was not changed fully to nano-sized ITO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. The size of primary ITO particle by Debye-Scherrer formula and surface resistance of ITO pellet were measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.97-102
• /
• 2004

용액 중에서 나노입자의 전기영동 특성을 이용한 전자종이용 잉크 제조를 위해 $TiO_2$ 나노입자를 저유전율 용매인 cyclohexane에 혼합한 후 용매와 용질의 비중차를 줄이기 위해 분말 상 polyethylen을 첨가하여 high energy milling의 방법으로 입자분쇄와 동시에 입자 표면에 고분자 풍을 코팅하였다. 용액내의 입자 분산성 향상과 용매 착색을 위하여 계면활성제와 oil-blue N을 첨가한 후 전자종이용 잉크를 제조하여 측정한 제타 전위 결과 cyclohexane 내에서 $TiO_2$의 제타전위는 -40mV 정도였으나 polyethylene으로 코팅한 후 계면활성제를 첨가하였을 경우 최대 -110mV 이상의 높은 값을 나타내었다. 실제 디스플레이 특성을 평가하기 위해 포토리소그래피를 이용하여 3인치 크기의 ITO glass 위에 $10{\mu}m$의 크기를 갖는 십자형의 격벽을 $40{\mu}m$의 높이로 균일하게 형성한 후 합성된 전자잉크로 주입하여 상부전극과 하부전극사이에 UV 경화제를 도포하여 UV 접합을 실시하였다. 격벽 내에서 입자의 mobility를 측정하여 환산된 전자잉크의 응답속도는 0.1cm/sec로 측정되었으나, 전기영동시 입자들의 움직임에 따른 반사광의 파형을 측정한 경우 0.07cm/sec의 응답속도를 나타내었다.

• Microbiology and Biotechnology Letters
• /
• v.43 no.4
• /
• pp.343-349
• /
• 2015

In this study, we applied an increased surface area fractional precipitation with hydrophilic polymer for decreasing the particle size of the anticancer agent paclitaxel from plant cell cultures. The addition of polymer resulted in a considerable decrease in the size of the paclitaxel precipitate. Among the polymers (HPMC 2910, PVP-K90, PVA) used, PVP-K90 was the most effective for the inhibition of precipitate growth. When PVP-K90 (0.2%, w/v) was used, the paclitaxel particles were four to five times smaller, having less than a $20{\mu}m$ radius, than those obtained in the absence of the polymer. In addition, the precipitate size was inversely correlated with the absolute value of zeta potential.