• Title/Summary/Keyword: 입자성장

Search Result 989, Processing Time 0.028 seconds

에어로졸 반응기 내에서 철 초미립자의 성장 특성

  • 박균영;장희동;최청송
    • Proceedings of the Korea Association of Crystal Growth Conference
    • /
    • 1997.10a
    • /
    • pp.7-11
    • /
    • 1997
  • 직경 3.5 cm, 길이 1.5 m 의 석영관 내에서 염화제1철 증기를 수소로 환원하여 철 초미립자를 제조하였다. 염화제1철의 증발조건, 염화제1철 증기와 수소의 혼합방법, 반응물의 예비가열온도, 반응온도, 염하제1철의 농도, 반응기내 체류시간이 생성된 철 입자의 크기 및 크기분포에 미치는 영향을 조사하였다. 철 입자의 평균직경은 40-88 cm 이고, 기하표준편차는 1.4 정도로 나타났다. 철 입자들은 자기적 성질에 의해 서로 연결되어 체인을 형성하였으며, 전자회절분석 결과 단결정이었다. 평균입경 55nm 철 입자들의 항자력은 900 Oe, 포화자화값은 130 emu/g 이었다.

  • PDF

Crystal growth of nanosized α-Fe2O3 particles in frit (Frit에서의 나노사이즈 α-Fe2O3 입자의 결정 성장)

  • Hiroaki-Katsuki, Hiroaki-Katsuki;Choi, Eun-Kyoung;Lee, Won-Jun;Moon, Won-Jin;Kim, Ung-Soo;Hwang, Kwang-Taek;Cho, Woo-Seok
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.28 no.2
    • /
    • pp.69-73
    • /
    • 2018
  • Crystal growth of ${\alpha}-Fe_2O_3$ nanosized particles of 80~90 nm in size, which were hydrothermally prepared from 0.03 M $FeCl_3$ solution at $100^{\circ}C$, was investigated in Pb-containing and Pb-free frit. By heating ${\alpha}-Fe_2O_3$ nanosized particles in two frits at $800^{\circ}C$, the average diameter of particles in frits was increased to 200~210 nm and 150~160 nm, respectively, and the crystal growth due to the aggregation and sintering of several ${\alpha}-Fe_2O_3$ particles was observed. Formation ratios of larger particles over 100 nm in diameter were 54 % in Pb-free frit and 85 % in Pb-containing frit. After heating ${\alpha}-Fe_2O_3$ particles in frits at $800^{\circ}C$, 7~9 nm in average diameter of pores were formed in particles. Theses pores were derived from the porous structure of original ${\alpha}-Fe_2O_3$ particles and confined in particles during sintering.

A Study on the Growth and Characteristics of Diamond Thin Films by RF Plasma CVD (고주파플라즈마CVD법에 의한 Diamond 박막의 성장과 특성)

  • 박상현;장재덕;최종규;이취중
    • Journal of the Korean Vacuum Society
    • /
    • v.2 no.3
    • /
    • pp.346-354
    • /
    • 1993
  • The diamond particles and films were deposited on Si and qurtz substrate for $CH_4-H_2$ mixed gas by using RF plasma CVD. The temperature of substrate and the thinkness of films deposited on Si substrate were uniformly kept up by inserting metal plate between substrate and substrate holder. On increasing the reaction pressure in the same discharge power, the morphologies of films were changed from well-defind films to micro-crystal or ball-like. When diamond films were deposited on Si substrate from $CH_4-H_2$ mixed gas, we obtained well-defined diamond films at lower concentration than 0.5 vol% of $CH_4/H_2$. The deposited diamond films were indentified by SEM, XRD and Raman spectroscopy.

  • PDF

Hydrotheraml Preparation of Crystallin Fine Powders (수열합성을 이용한 단결정 미세분말의 제조)

  • 서경원
    • Proceedings of the Korea Association of Crystal Growth Conference
    • /
    • 1997.10a
    • /
    • pp.21-25
    • /
    • 1997
  • 우수한 세라믹스 제조를 위해서는 작은 입자지름, 좁은 입도분포, 구형의 입자형태, dopant와 matrix가 균일한 고용체를 갖고, 응집입자가 없으며 고순도인 원료 분말의 제조가 선행되어야 한다. 이를 위하여 본 연구에서는 수열 합성법을 이용하여$\alpha$-Al$_2$O$_3$, $\alpha$-SiO$_2$, PZT, PSZT, BTO등의 미세분말을 제조하는 공정에서 반응온도, 광화제의 양과 종류, 반응시간, 출발물질의 양과 종류, 전처리공정, 교반공정 등이 평균입자지름과 결정성 및 입도분포에 미치는 영향을 조사하였다. 그결과 미세분말의 종류에 관계없이 반응온도, 반응시간, 성장기질의 농도, 종자결정의 농도 등이 증가할수록 평균입경은 커지며, 광화제의 농도가 증가할수록 평균 입자지름이 작아지고, 광화제의 농도가 종자결정의 농도가 증가할수록 입도분포가 좁아짐을 알 수 있었다. 특히 $\alpha$-SiO$_2$에 대해 수열합성실험으로부터 평균입자지름과 수열합성의 조업변수간의 특성방정식을 얻었다.

  • PDF

Computer simulation of titania particle agglomeration (티타니아 입자의 응집에 대한 컴퓨터 시뮬레이션)

  • Kim, Jong-Cheol;Auh, Keun-Ho
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.10 no.1
    • /
    • pp.23-29
    • /
    • 2000
  • The agglomeration of titania particles with 30 nm in radii was simulated based on the colloidal stability. For surface potential increase from 4.5 to 16.8 mV the height of energy barrier increased. This tendency may explain the experimentally observed aggregation behavior where particles with smaller size and higher potential exhibited higher stability but form bigger and harder agglomerates with irregular shapes after drying.

  • PDF

Control of Electromagnetic Properties of High Initial Permeability Mn-Zn Ferrite with the Microstructure Control (미세구조 조절에 의한 고투자율 Mn-Zn Ferrite의 특성제어)

  • 도세욱;류지태;김정희;강태현;허원도
    • Resources Recycling
    • /
    • v.7 no.4
    • /
    • pp.50-54
    • /
    • 1998
  • In order to obtain desired electromagnetic propertieι high initial permeability and good frequency dependance of initial p permeability, the adding effects of sevral seeds were experimented in Mn-Zn ferrite system. As adding seed grams, calcined at sintering temperature, abnormal grains were disappeared clearly but the density and the initial permcability of sintered Mn-Zn ferrite body were decreased. On the contrary, in case of adding seed rains which were calcined below the calcination temperatnre of matrix particle, abnormal grains remained but the initial permeability was increas$\xi$d with proper s$\xi$ed content. W With proper seed content, the initial permeability was increased by 10-20% but tbe $\alpha$ltoff frequency was not changed.

  • PDF

Effects of composition of preannealed Y-Ba-Cu-0 thin films deposited by sputtering on the superconducting properties and microstructure of post-annealed thin films (스퍼터링 증착된 Y-Ba-Cu-O계 박막의 열처리 전 조성이 열처리 후 박막의 초전도특성 및 미세구조에 미치는 영향)

  • Cho, Hae-Seok;Kim, Hyeong-Jun
    • Korean Journal of Materials Research
    • /
    • v.1 no.1
    • /
    • pp.54-61
    • /
    • 1991
  • YBCO films deposited on MgO(100) and Si(100) by rf-magnetron sputtering using stoichiometric single target were annealed under oxygen atmosphere at $880^{\circ}C$ for 1 hr. The microstructure and superconducting properties of YBCO thin films depended on the composition of pre-annealed thin films. Basal planesuperconducting particles grown on MgO(100) substrate had small and rod-like shade due to preferred orientation, while superconducting film grown on the basal plane-superconducting particles showed round-shape particles. If pre-annealed thin film had nonstoichiometric composition, liquid phase was formed during the heat treatment, which made it easy for particles to grow in the preferred orientation and thus to form textured structure. But the thin films with the textured structure did not show good superconducting properties, especially $T_c$, since the liquid phase transformed into second phase in the grain boundary during the cooling. The effect of the second phase on $T_{c, \;zero}$ was greater than that on $T_{c, \;on}$.

  • PDF

Kinetics of Seed Growth of α-Ferric Oxyhydroxide (α-Ferric oxyhydroxide 입자의 핵성장 반응에 관한 연구)

  • Seul, Soo-Duk;Shin, Dong-Ock
    • Applied Chemistry for Engineering
    • /
    • v.8 no.4
    • /
    • pp.602-609
    • /
    • 1997
  • The seed formation and growth of $\alpha$-ferric oxyhydroxide with aerial oxidative precipitation from aqueous solution of ferrous sulfate with KOH, NaOH, $Na_2CO_3$ and $K_2CO_3$ as precipitants have been studied by free pH drift experiment. It has been shown that all precipitants give same particle formation and growth path, and average particle length from KOH and NaOH as precipitants was about 1.5 times shorter than that of $K_2CO_3$ and $Na_2CO_3$. When initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$ of KOH was decreased the particle was grown oxyhydroxide seed growth from aqueous solution of ferrous sulfate with KOH has been studied. The influence of the air flow rate, reaction temperature and initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$, on the kinetics of seed growth are investigated by static pH experiment. The oxidation rate of seed growth increased with increase in the air low rate, reaction temperature and initial mole patio. The activation energy of seed growth is 16.16 KJ/mol and the rate equation of seed growth can be written as follows: $-\frac{d[Fe^{2+}]}{dt}=1.46{\times}10^4[P_{o2}]^{0.66}[OH^-]^{2.19}exp(-\frac{16.16}{dt})$.

  • PDF