• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.655-660
• /
• 2013

In this review, I present the configuration behaviors of various Janus particles at fluid-fluid interfaces. As a model system, Janus spheres, Janus ellipsoids, and Janus dumbbells are selected to investigate the effect of shape, size, and wettability on their configurations. In particular cases, Janus ellipsoids can adopt two distinct configurations (i.e., upright and tilted configurations) due to the presence of two energy minima in the attachment energy profile. On the contrary, a single energy minimum is found in the case of Janus dumbbells such that they adopt either the upright or tilted configuration. Interestingly, the geometric and chemical asymmetry and anisotropy in the characteristic properties of Janus dumbbells lead to an intermediate state in which the particles can rotate freely in a certain range of orientation angles.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.314-315
• /
• 2002

대기중에는 다양한 크기와 모양, 그리고 화학성분을 가진 입자들이 존재한다. 이러한 입자들은 발생원이 다양하고 대기중에 존재하면서 광화학적인 변화를 거쳐 형성되기도 한다. 입자의 화학조성과 크기는 발생원을 구분하기 위한 일반적인 척도로 쓰이고 있다. 대기 에어러솔의 크기분포특성은 에어러솔의 변화 요소인 발생원과 제거 그리고 동역학적인 과정을 이해하는데 중요한 역할을 한다. (중략)

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2106-2109
• /
• 2008

Nanofluids have been studied as possible alternatives for heat transfer fluids to improve the efficiency of heat exchangers. There are deviations of measured effective thermal conductivities between research-groups, and the mechanisms of the effective thermal conductivity enhancement of nanofluids are not confirmed yet. In this study, the effects of particle shape on the effective thermal conductivity enhancement are discussed and presented as a possible explanation of the deviations. The particle motion effect is found to be negligible for nanofluids of high aspect ratio cylindrical particles, which is believed to be important for nanofluids of spherical particles, while the percolation network formation and contact resistance play dominant roles in determining the effective thermal conductivity.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.480-485
• /
• 2020

The extended Maxwell-Wagner polarization model is employed to describe the ER behavior of the conducting particle ER suspensions, and solutions to the equation of motion are obtained by dynamic simulation. The simulation results show the nonlinear ER behavior (Δτ∝Eⁿ, n≈1.5) of the conducting particle ER suspensions. The response point, where shear stress reaches steady-state, is the point where stable break-up and rebuild of the chain-like structure of particles reaches. Also, it shows the minimum of shear stress, which corresponds the start-up of random particle configuration. The shear stress reaches plateau as particle volume fraction increases.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.259-263
• /
• 1992

한국 마늘에 감염되어 있는 주된 바이러스 중의 하나로 알려진 마늘 잠복 바이러스 (GMV)의 분자 구조와 병 발생 메카니즘을 이해하기 위하여, 국부 감염 숙주 식물인 Vicia faba에 연속적으로 감염시킴으로써 마늘 잠복 바이러스를 정제하였고, GMV에 대한 전신 감염성 숙주 식물로 생각되는 leek에서 GLV를 대량으로 증식시켰다. 투과전자현미경을 이용하여 바이러스 입자를 관찰한 결과, 마늘 바이러스들의 입자의 길이는 200-2000 nm의 분포를 보였으나 입자의 대부분은 600-900 nm의 범위 안에 존재하였다. 반면 순수 분리된 GLV 입자는 평균 690 nm의 길이를 보여주었고, 유연한 실 모양이었다. SDS-PAGE 분석으로 혼합 감염된 마늘 잎으로부터 분리된 마늘 바이러스의 구조 단백질은 분자량 24,500-38,000 Da의 분포를 나타내었으나, GLV 껍질 단백질의 분자량은 34,000 Da으로 나타났다.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2014

Phosphate rock, phosphogypsum, and products in phosphate processing facility contain naturally occurring radioactive materials (NORM). Therefore, they may give rise to enhanced radiation dose to workers due to inhalation of airborne particulates. Internal dose due to particle inhalation varies depending on particle properties. The objective of the present study was to characterize particle properties at the largest phosphate processing facility in Korea. A cascade impactor was employed to sample airborne particulates at various processing areas in the plant. The collected samples were used for characterization of particle size distribution, particle concentration in the air, and shape analysis. Aerodynamic diameters of airborne particulates ranged 0.03-100 ${\mu}m$ with the highest concentration at the particle size range of 4.7-5.8 ${\mu}m$ (geometric mean = 5.22 ${\mu}m$) or 5.8-9.0 ${\mu}m$ (geometric mean = 7.22 ${\mu}m$). Particle concentrations in the air varied widely by sampling area up to more than two orders of magnitude. The large variation resulted from the variability of mechanical operations and building ventilations. The airborne particulates appeared as spheroids or rough spherical fragments across all sampling areas and sampled size intervals. Average mass densities of phosphate rocks, phosphogypsums, and fertilizers were 3.1-3.4, 2.1-2.6, and 1.7 $gcm^{-3}$, respectively. Radioactivity concentration of uranium series in phosphate rocks varied with country of origin, ranging 94-866 $Bqkg^{-1}$. Among the uranium series, uranium was mostly concentrated on products, including phosphoric acid or fertilizers whereas radium was concentrated on byproducts or phosphogypsum. No significant radioactivity of $^{226}Ra$ and $^{228}Ra$ were found in fertilizer. However, $^{40}K$ concentration in fertilizer was up to 5,000 Bq $g^{-1}$. The database established in this study can be used for the accurate risk assessment of workers due to inhalation of airborne particles containing NORM. In addition, the findings can be used as a basic data for development of safety standard and guide and for practical radiation safety management at the facility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.417.2-417.2
• /
• 2014

금 나노입자의 특성은 그 크기와 모양 그리고 균일한 정도에 의해 결정되므로, 균일한 크기의 금 나노입자를 사용하는 것이 매우 중요하다. Citrate 환원법으로 금 나노입자 합성 시 입자의 크기 분포에 가장 큰 영향을 주는 요인은 pH 이고, 반응용액의 pH를 높이면 크기가 균일한 금 나노입자의 합성이 가능함을 선행연구를 통해 확인한 바 있다[1]. 본 연구는 금 나노입자 형성 반응이 진행됨에 따라 나타나는 pH 변화를 실시간으로 추적하여 pH 변화가 금 나노입자의 균일도에 미치는 영향을 관찰한 것이다. 반응용액의 pH는 반응이 진행됨에 따라 지속적으로 변하는데, 반응초기에 pH가 감소하다가 (Stage I) 전환점 이후 pH가 증가하는 (Stage I) 양상을 보인다. 이러한 현상은 Au 이온의 리간드가 Cl-에서 OH-로 변화하기 때문으로 생각되고, 이로 인해 Stage I의 핵 형성반응과 Stage II의 성장반응에 영향을 주게 되어 결과적으로 입자의 크기 균일성에 영향을 주는 것으로 판단된다.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.128-134
• /
• 1999

Rheological characterization was examined for two different types of magenetic particle (rod-like $\gamma$-$Fe_{2}O_{3}$, $CrO_2$ )suspension in this study. The measured suspension viscosity (viscosity vs. concentration or shear rate) is used to obtain the dependence of viscous energy dissipation on the microstructural states of magnetic particle dispersions as well as the microstructural shape effects which are related to magnetic particle orientation. The empirical formulas from mean field theory and the Mooney equation are used to relate suspension viscosity to particle concentration. Intrinsic viscosities of these two different types of rod-like magnetic particle suspensions are found to exceed the prediction of hydrodynamic theory for dilute suspensions and support the existence of flocs containing significant amounts of immobilized suspending medium due to native attraction forces among particles in the microstructures.

• Clean Technology
• /
• v.18 no.3
• /
• pp.295-300
• /
• 2012

Synthesis of well-defined particle with tunable size, shape, and functionalities is strongly emphasized for various applications such as chemistry, biology, material science, chemical engineering, medicine, and biotechnology. This study presents micromolding method for the fabrication of anisotropic particles with elegant control of curvature of covex roof. For the demostration of rapid fabrication of the particles, we have applied polydimethylsiloxane (PDMS) micromold as structure guiding template and wetting fluid to control curvature of roof of the particles. Based on this approach, we can control the radius of curvature from $20{\mu}m$ to $70{\mu}m$ with different aspect ratio of mold. In addition, wetting fluids with different wetting properties can also modulate the height and radius of curvature of the particles. We envision that this methodology is promising tool for precise control of particle shape in 3-dimensional space and new synthetic route for anisotropic particles with cost effective, simple, easy, and fast procedure.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.156-162
• /
• 2015

나노입자의 특성과 기능은 bulk 물질과 달리, 나노 입자를 이루는 원소의 종류 뿐만아니라 크기와 모양에도 밀접한 연관이 있다. 이를 계산화학적으로 예측할 수 있다면 나노입자의 합성과 응용에 큰 도움이 될 것이다. 본 연구에서는 일정한 크기의 은 나노입자의 구조를 계산한 뒤, 바깥쪽의 두 원자 층을 무작위로 섞은 뒤 다시 구조최적화 계산을 거쳐 다양한 나노입자들의 구조를 찾았다. 이렇게 구해진 구조들의 에너지를 계산하고 원자를 하나 떼어낼 때의 에너지를 계산하여 응집 에너지를 구해 경향성을 분석해 보았다. 더 나아가, 나노입자를 이루는 각 원자 층의 개수가 하나 더 커질 때 필요한 에너지를 계산하여, 원자 하나당 평균을 내어 분석해보았다. 본 연구에서는 병렬화 된 밀도범함수이론 계산 프로그램을 이용해 100개가 넘는 입자의 계산이 가능하다는 것을 확인했고, 은 나노입자의 크기가 증가함에 따라 원자 하나가 추가되는 경우와, 원자 층 하나가 추가되는 경우의 그래프를 보고 경향성을 분석하였다. 이는 다른 화학적 환경에 있는 은 원자의 에너지를 계산하여 각각의 환경에서의 은 나노 입자의 크기를 예측하는 계산하는 데 초석이 될 것이다.