• Title/Summary/Keyword: 입상형

Search Result 67, Processing Time 0.027 seconds

Effect of Dolomite Levels in Various Root Media Containing Micronutrient Mixes on Growth of Marigold Plug Seedlings (미량원소복합제가 혼합된 각종 상토에서 고토석회의 시비수준이 매리골드 플러그 묘의 생육에 미치는 영향)

  • Choi Jong-Myung
    • Journal of Bio-Environment Control
    • /
    • v.15 no.3
    • /
    • pp.217-224
    • /
    • 2006
  • Objective of this research was to determine the effect of application rate of dolomite in root media containing micronutrient mixes on growth of marigold 'Orange boy' in plug trays. To achieve this, three granular micronutrient mixes such as HF 1, MF 2, and MF 3 were produced and incorporated into three root media, peatmoss+composted pine bark (1:1, v/v, PB), peatmoss+composted rice-hull (1:1, v/v, PR), and peatmoss+composted saw-dust (1:1, v/v, PS), with a rate of $0.3g{\cdot}L^{-1}$. Elevated application rate of dolomite in PB medium containing MF 1 decreased crop growth at 35 days after sowing with the highest fresh and dry weight in the control treatment of dolomite. The treatments of 3.0 and $6.0g{\cdot}L^{-1}$ of dolomite in PB medium containing MF 2 produced 0.133g of dry weight and 0.686g of fresh weight, respectively, which were the highest among treatments of dolomite. But the treatments of 3.0 and $6.0g{\cdot}L^{-1}$ of dolomite in PB medium containing MF 3 produced the highest fresh and dry weight, respectively. Elevated application rate of dolomite in PR medium containing MF 1, 2, and 3 resulted in decrease of fresh an dry weight. The relative growth suppression induced by elevated application rate of dolomite was more severe when MF 3 were incorporated than MF 1 and 2. The treatments of 3.0 and $6.0g{\cdot}L^{-1}$ of dolomite in PS medium containing MF 1 and 3 showed good growth, but elevated application rate of dolomite in PS medium containing MF 2 and control resulted in increase of dry and fresh weight. These results indicated that the application rate of dolomite should be adjusted by kinds of root media and micronutrient mixes.

Effect of Fused Superphosphate Levels in Various Root Media Containing Micronutrient Mixes on Growth of Marigold Plug Seedlings (미량원소복합제가 혼합된 각종 상토에서 용과린의 시비수준이 매리골드 플러그 묘의 생육에 미치는 영향)

  • Choi Jong-Myung
    • Journal of Bio-Environment Control
    • /
    • v.15 no.2
    • /
    • pp.196-203
    • /
    • 2006
  • Objective of this research was to determine the effect of application level of fused superphosphate (FSPP) in root media containing granular micronutrient fertilizers (MF) on growth of marigold 'Orange boy' in plug culture. To achieve this, three granular micronutrient mixes such as MF 1, MF 2, and MF 3 were produced and incorporated into three root media, peatmoss+composted pine bark (1:1, v/v, PB), peatmoss+composted rice-hull (1:1, v/v, PR), and peatmoss+composted saw-dust (1:1, v/v, PS), at a rate of $0.3g{\cdot}L^{-1}$. Elevated application level of FSPP in PS medium containing each of MF resulted in increase of plant growth such as plant height, plant width, stem diameter, fresh weight and dry weight at 35days after sowing. The dry weight in the treatment of MF 1, MF 2, MF 3, and control fertilized with $9.0g{\cdot}L^{-1}$ of FSPP were 0.066g, 0.103g, 0.077g, and 0.095g per plant, respectively. These results indicated that each of MF affected marigold plug seedlings differently. The application level of FSPP resulted in the heaviest fresh and dry weight in PR medium were $9.0g{\cdot}L^{-1}$ in MF 1, $3.0g{\cdot}L^{-1}$ in MF 2, $9.0g{\cdot}L^{-1}$ in MF 3, and $6.0g{\cdot}L^{-1}$ in control. Elevated application level of FSPP in PB medium containing each of the micronutrient mix increased fresh and dry weight. The general trends in response of plant growth to elevated FSPP were linear and quadratic. The dry weight in the treatment of MF 1, MF 2, MF 3, and control fertilized with $9.0g{\cdot}L^{-1}$ of FSPP in PB medium were 0.131g, 0.104g, 0.137g, and 0.111g per plant at 35days after sowing. These results indicated that MF 1 and MF 3 performed better than MF 2 and control treatments in growth of marigold plug seedlings.

Four Heavenly Kings Statues of Hoeamsa in the Early Joseon Dynasty: Seen Through Clay-Fragments Excavated From the Yangju Hoeamsa Site (양주 회암사지(楊州 檜巖寺址) 4단지 문지 출토 소조편(塑造片)을 통해 본 회암사 사천왕상)

  • SHIM, Yeoungshin
    • Korean Journal of Heritage: History & Science
    • /
    • v.54 no.3
    • /
    • pp.168-191
    • /
    • 2021
  • This article examines the shape, iconography, and creation date of the Four Buddhist Heavenly Kings (Sacheonwang 四天王) enshrined in the Heavenly Kings' Gate (Cheonwangmun 天王門) of Hoeamsa in Yangju, Gyeonggi Province during the early Joseon Dynasty. First, small fragments of clay decoration excavated from a fourth-platform gate site of the Hoeamsa Temple Site in Yangju Gyeonggi Province were analyzed and compared to other Four Heavenly Kings enshrined in the (Cheonwangmun gates) during the Joseon Dynasty. In addition, the size and shape of the gate were compared to other Cheonwangmun gates constructed during the Joseon Dynasty. Results revealed that the excavated fragments were part of the armor of Sacheonwang, and the clay-standing statues enshrined in the fourth-platform gate of Hoeamsa Temple would be proportional in size to those of Beopjusa Temple in Boeum, South Chungcheong Province. The flame-type pieces, which decorated the Heavenly King's crown in the Joseon Dynasty, and the rectangular-type pieces were not found in artifacts from the Goryeo Dynasty. Therefore, the Sacheonwang sculptures of the Hoeamsa Temple were likely made in the late 15th century in the early Joseon Dynasty. A detailed iconography of the Sacheonwang of Hoeamsa is presumedly based on the Buddhist paintings and illustrations of Buddhist scriptures (Gyeongbyeonsangdo 經變相圖)from the late Goryeo and early Joseon. During the late Goryeo Dynasty and early Joseon Dynasty, Traditional iconography from Goryeo and new iconography from Ming coexisted. However, in the late 15th century, the Sacheonwang statues of the early Joseon Dynasty had many different elements from those of the Goryeo Dynasty and were similar to those enshrined in Cheonwangmun Gate during the Joseon Dynasty. The Four Heavenly Kings of Hoeamsa Temple, believed to have been produced in the late 15th century, has historical significance in the following points. They were the first Joseon Sacheonwang statues example enshrined in the Cheonwangmun gate. In addition, they were established as a new tradition that influenced the iconography of the Four Heavenly Kings during the Joseon Dynasty.

The Prognostic Factors in Progression of Pneumoconiosis (진폐증의 예후에 영향을 미치는 인자)

  • Kim, Hyung-Ju;Jang, An-Soo;Kim, Sang-Guk;Choi, Soo-In;Park, Sang-Hoo;Yang, Seung-Won;Seo, Jeong-Pyeong;Lee, Soong;Park, Hong-Bae;Son, Myung-Ho
    • Tuberculosis and Respiratory Diseases
    • /
    • v.47 no.1
    • /
    • pp.57-65
    • /
    • 1999
  • Backround : Pneumoconiosis is the parenchymal lung disease that results from the inhalation and deposition of dust, usually mineral dust of occupational or environmental origin. Most of the pneumoconiosis can be categorized to coal workers' pneumoconiosis (CWP) in Korea. No effective treatement is currently available, and the therapy for symptomatic CWP is limited to treatment of complication. Therefore authors analyzed and reviewed clinical features and radiological findings of 95 patients with pneumoconiosis for assessing the prognostic factors in disease progression. Method: We reviewed medical records of 95 cases with pneumoconiosis including history, chest X-ray, pulmonary function test, electrocardiography, AFB stain and culture of sputum, and routine blood examination between June 1995 and June 1997 in Seonam University Namkwang Hospital. Results: All of cases are male(mean age, 57.4 years), 91 cases out of them are miners. The mean duration of exposure to dust is 18.8 years. Major clinical symptoms are dyspnea (100%), sputum (71.6%), chest pain (55.8%), cough (23.2%), and hemoptysis (6.3%). 82 % of cases are over Morgan-Seaton Grade 2 in the degree of dyspnea. Small opacity on chest x-ray is 82.1 % and large opacity is 17.9%. Small opacity has tit type (37.2%), q/q type (25.6%) and r/r type (11.5%). B type is 42.2% in large opacity. For the pulmonary function test, restrictive type is 40.3%, mixed type 19.5% and obstructive type 8.3%. The more increasing chest Xray density, the more decreasing $FEV_1$ (p<0.01). 38% of patients show tuberculosis in chest X-ray, 15.8% positive smear of acid fast bacilli in sputum. The prevalence of pulmonary tuberculosis is high in patients with poor clinical condition. The cases with the active pulmonary tuberculosis have severe dyspnea. Expired cases show 100% and 75% of positive pulmonary tuberculosis in chest X-ray and sputum examination, respectively. 75% of expired cases show the chronic cor pulmonale, who died of acute respiratory failure. Conclusion: These findings indicate that tuberculoois infection has a decisive influence on the progress and prognoois of pneumoconioois.

  • PDF

Measurement of Crack Depth and Weathering Degree Using Ultrasonic Velocity and Deterioration Evaluation of the Unhyungung Stone Water Container (운현궁수조의 손상평가와 초음파 속도를 이용한 풍화도 및 균열심도 측정)

  • Chun, Yu-Gun;Lee, Chan-Hee;Jo, Seung-Nam;Jo, Yeong-Hoon;Park, Gi-Jung;Yang, Pil-Seung
    • Journal of Conservation Science
    • /
    • v.24
    • /
    • pp.1-11
    • /
    • 2008
  • The Unhyungung Water Container in the possession of the Seoul Museum of History in Korea is consisted of a calcareous marble developed laminated bedding and numerous argillaceous veinlets. This monument should need to conservation treatment because of black discoloration and seriously numerous cracks. Vertical and horizontal cracks in the monument are developed following stratification and argillaceous veinlets that are relatively low coherence between the rock materials. We have proved that the material inducing discoloration on the surface is carbon which is formed by deposited organic matters. As the result of the ultrasonic measurements, although highly surface weathering degree, the physical properties of the Unhyungung Water Container is confirmed slightly weathered state. The depths of cracks in the monument are calculated at maximum 60mm in some cracks completely penetrating into the wall and at minimum 9mm in the other crack. The cracks, developed following veinlet, are revealed that there penetrate from an outer wall to an inside wall for the monument. And most depths of cracks, developed following stratification, are calculated 20 to 30mm. This result will offer a significant data for conservation of the Unhyungung Water Container.

  • PDF

Gilt-bronze Standing Avalokiteshvara from Gyuam-ri, Buyeo: The Structure and Production Technique (부여 규암리 출토 금동관음보살 입상의 형상과 제작기법)

  • Shin, Yongbi;Kim, Jiho
    • Conservation Science in Museum
    • /
    • v.23
    • /
    • pp.1-16
    • /
    • 2020
  • In this paper, Gilt-bronze Standing Avaolkiteshvara (National Treasure No. 293, M355) excavated at Gyuam-ri in Buyeo was observed with a microscope to identify the production technique applied to it. It was also analyzed with XRF and hard X-ray to identify the composition and the surface treatment techniques and casting method applied. In this statue, Avalokiteshvara is standing upright on a lotus pedestal. The lotus designs on the pedestal and those on the shawl flowing down on both sides of the statue are characteristic of Buddhist statues from the seventh century or later. The use of supports to affix the outer and inner molds and traces of injected cast were observed in the interior of the pedestal. The blisters on the arms and pedestal created during the bronze casting indicate the use of lost-wax casting, which was popularly employed for the production of mid- or small-sized gilt-bronze Buddhist statues in ancient times. The composition analysis identified a copper-tin-lead ternary alloy in the interior of the statue that was conventional used in the sixth and seventh centuries. It is likely that this simple alloy was used to facilitate casting and produce clearer expressions of designs and ornaments on the statue. Mercury (Hg) was detected on the surface of the statue, indicating the use of amalgam-plating with gold (Au) dissolved in mercury. This plating method is a common surface treatment technique used for small gilt-bronze statutes in ancient Korea.

Effect of the Slow-releasing Fertilizer Applied Directly to Rice Seedling Tray Before Transplanting and Practical Test at Field (이앙직전 벼 육묘상자 살포용 완효성 비료의 처리 효과)

  • Chi, Jeong-Hyun;Choi, Byoung-Rourl;Jo, Gwang-Lae;Kim, Soon-Jae;Park, Kyeong-Yeol;Kwon, O-Youn
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.58 no.1
    • /
    • pp.8-14
    • /
    • 2013
  • The newly developed fertilizer is the slow-releasing fertilizer which can be used as a basal fertilizer without no additional fertilization at tillering stage. It has 30-4-6% of $N-P_2O_5-K_2O$ and was coated with mixture of LDPE (Low density polyethylene), EVA (Ethylene vinyl acetate), BDP (Bio degraded polymer), TALC and nonionic surfactant for the controlled release up to 50 days after application. Coating materials were designed to be decomposed naturally. This fertilizer can be applied directly to the seedling tray mechanically just before transplanting, resulting in significant labor saving effect. The developed slow-release fertilizer, which can replace both basal fertilization and top dressing at tillering stage by single application directly to seedling tray, showed the highest release at 14~21 days after transplanting. Considering the plant growth at different growth stages and yield, the optimal application rate of developed slow-release fertilizer was 300 g per rice nursery tray and the yield of rice at this application rate was 5.25 MT/ha. Rice quality in terms of head rice grain ratio, amylose content, whiteness, and taste value decreased as fertilization rate increased from 200 g to 500 g per nursery tray. Fertilization rate based on quantity of fertilizer ingredients (N, P, K) was reduced by 49.3% compared to the standard application rate and there was 49.2% reduction in labor input for fertilization.

Development of Customizable Fluorescence Detection System using 3D Printer (3D 프린터를 활용한 맞춤형 휴대용 형광측정 장치 개발)

  • Cho, Kyoung-rae;Seo, Jeong-hyeok;Choe, Se-woon
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2019.05a
    • /
    • pp.278-280
    • /
    • 2019
  • Flow cytometer is one of the instrument that can measure various optical properties of a single cell or microparticle. These parameters including size, granularity, and fluorescence intensity are determined by the physical and optical interaction of the cells with excitation light source. However, users have some difficulties such as high cost, size of instrument, and limited fluorescence selectivity. In addition, abundant data is also unintentionally acquired even though user wants to have a single optical parameter. For these reasons, the use of flow cytometer is more challenging for researchers to apply their study. Therefore, the proposed study aims to develop a low-cost portable fluorescence acquisition system using a commercially available light-emitting diode and photodiode. It is designed by a 3D printer, and fluorescence selectivities are increased by changing of the light source / optical filter / detection sensor. Various number sets of fluorescently labeled cells were measured, and its feasibility was evaluated through the proposed system. As a result, acquried fluorescence intensities were proportional to the concentration of the cells and showed high linearity.

  • PDF

Metamorphism of the Buncheon and Hongjeas Granitic Gneisses (분천과 홍제사 화강암질 편마암체의 변성작용)

  • 김형수;이종혁
    • The Journal of the Petrological Society of Korea
    • /
    • v.4 no.1
    • /
    • pp.61-87
    • /
    • 1995
  • On the basis of lithology, the Precambrian Hongjesa Granitic Gneiss can be locally zoned into granoblastic granitic gneiss, porphyroblastic granitic gneiss, migmatitic gneiss from its center to the marginal part. There are no distinct differences in mineral assemblages by lithologic zoning, but it partly shows the change of mineral assemblage in the adjacent with migmatitic gneiss, thus mineral assemblage can be subdivided into Zone I and Zone II. In terms of mineral compositions, the characteristics of Zone I are coexisting K-feldspar+muscovite+sillimanite. The characteristics of Zone II are (1) breakdown of muscovite, (2) coexisting garnetScordierite, (3) coexisting garnet+cordierite + orthoamphibole. The Buncheon Granitic Gneiss is mainly composed of augen gneiss. In the adjacent area with Honjesa Granitic Gneisses, Buncheon Granitic Gneiss has the mineral assemblage of sillimanite+biotite+K-feldspar+(kyanite). Kyanite occurs as relict grains in the Buncheon and Hongjesa Granitic Gneissess. Kyanite shows anhedral to subhedral form and coexists with sillimanite in only one of these samples. Garnet from a migmatitic gneiss (Zone 11) has relatively high $X_{Fe}$ value in core and rim. Garnet from a porphyroblastic granitic gneiss(Zone I) has relatively homogemeous core but compositionally-zoned rim. Biotites show various colour from greenish-brown, brown to reddish brown at maximum adsorption. Also, the Ti, and Mg content in biotites increases from Zone I to Zone II. The plagioclases shows the chemical composition of $Ab_{84}An_{16}$ -$Ab_{70}An_{30}$ (oligoclase) in Zone I and $Ab_{70}An_{30}$ -$Ab_{50}An_{50}$(andesine) in Zone 11. These variations indicate that the gneisses in the study area experienced a upperamphibolite facies. The presence of kyanite as relict grains indicates that the metamorphic rocks in this area exprienced a high-temperature/medium-pressure type metamorphism, followed by high-temperaturellow-pressure metamorphism. Metamorphic P-T conditions for each gneiss estimated from various geothermobarometers and phase equilibria are 698-$729^{\circ}C$/6.3-11.3 kbar in augen gneiss, 621-$667^{\circ}C$/1.0-5.4 kbar in migmatitic gneiss, and 602-$624^{\circ}C$/1.9-3.4 kbar in porphyroblastic granitic gneiss. These data suggest that the study area was subjected to a clockwise P-T path with isothermal decompression (dP/dT=about 60 bar/$^{\circ}C$).

  • PDF

A Study on the Construction Date of the Five-story Stone Pagoda at the Dongsa-ri Temple Site in Buyeo (부여 동사리사지(東寺里寺址) 오층석탑 건립 연대 고찰)

  • Kang, Samhye
    • MISULJARYO - National Museum of Korea Art Journal
    • /
    • v.99
    • /
    • pp.50-71
    • /
    • 2021
  • The Five-story Stone Pagoda from the Dongsa-ri Temple Site in Buyeo, dated to early Goyeo Dynasty, is valuable in that it is the southernmost example of the capital Kaesong pagoda style. This pagoda exhibits characteristics of the central Goryeo style featured in the pagodas built in and around the capital Kaesong, such as the diagonally curved section of the support for the cover stone above the upper stereobate. It also shares stylistic affinities with eleventh-century stone pagodas. The ansangmun (elephant eye patterns) in the lower stereobate of the Dongsa-ri Five-story Stone Pagoda resemble those in the pedestal of the Stone Seated Buddha (which was likely repaired in 1028 during the reign of King Hyeonjong), at the Jeongrimsa Temple site in Buyeo. It also reflects elements found in the flagpole supports from the Cheonheungsa Temple site in Cheonan. The sculpting techniques used in these patterns are also similar. Such congruencies suggest that the Dongsa-ri Five-story Stone Pagoda was built in the eleventh century. The Dongsa-ri Temple Site in Buyeo, located near the Geumgang River, served as a principal route for transporting grain-tax during the Goryeo Dynasty. It was also situated along the way to the Goryeo royal temple, Gaetaesa Temple. The geographical significance of the site and the extensive repairs undertaken at Jeongrimsa Temple during the reign of King Hyeonjong (r. 1009-1031) of the Goryeo Dynasty appear to have impacted the production of the Dongsa-ri Five-story Stone Pagoda. The Dongsa-ri Five-story Stone Pagoda also bears stylistic resemblances to the stone pagoda and flagpole supports found at neighboring Cheonheungsa Temple, which is presumed to be related to the establishment of Honggyeongsa (or Honggyeongwon) Temple in 1021 in Cheonan. This indicates the route of the transmission of the Kaesong pagoda style. The Five-story Stone Pagoda from the Dongsa-ri Temple Site pays testimony to the cultural accomplishments of eleventh-century stone artworks in Buyeo and adjacent regions. This pagoda embodies the majestic and assertive aesthetics that define of the Goryeo Dynasty, as do early Goryeo colossal Buddhist sculptures, including the Stone Standing Maitreya Bodhisattva at Daejosa Temple in Buyeo, the Stone Standing Buddha Triad at Gaetaesa Temple in Nonsan, and the Stone Standing Maitreya Bodhisattva at Gwanchoksa Temple in Nonsan. All of these bear similarities to the massive stone lantern and pagoda at Hyeonhwasa Temple in the capital Kaesong. The production of the light, sleek, sharp, and sophisticated Dongsa-ri Five-story Stone Pagoda is presumed to reflect the maturity of the cultural competence of the people in Dongsa-ri, Buyeo under the influence of Buddhist culture from the capital Kaesong during the eleventh century, a time marked by active cultural exchanges among regions.