• Journal of the Korea Society for Simulation
• /
• v.30 no.1
• /
• pp.55-63
• /
• 2021

As a study on ballistic protection performance of a weapon system that is used in combat simulation, this paper aims to propose an improvement effect of the ballistic protection performance varying with incident angle of a bullet. For this, live-fire ballistic tests were performed to determine either complete penetration(CP) and partial penetration(PP) of three types of general armor plates made of uniformly rolled steel plates against a small caliber threat using 5.45 mm bullets with various speed. The major test parameter was the material of the weapon system and incident angle of the bullet with the target. Further, to quantitatively analyze the ballistic protection performance, three existing measurement methods were used for ballistic limit velocity. The test results showed that the ballistic protection performance with the incident angle of 30 degrees was 4% to 14% varying with the material of the armor plates greater than that of 0 degrees, which was approximately 1.1 times the performance improvement on average when compared to the conventional angle of incidence of the 0 degree. Those test results are expected to contribute to developing a more realistic combat simulation addressing the parameter improving the ballistic protection performance of an armor plate.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.239-242
• /
• 1998

본 논문에서는 횡파를 이용한 STAM 시스템을 이용하여 다층구조물에 대한 토모그라픽 영상을 복원함으로써 토모그라픽 영상의 분해능을 개선시키는 방법에 관하여 연구하였다. 먼저, STAM 시스템의 수조에서 초음파가 시료로 입사될 때 입사각도에 따라 발생되는 종파와 횡파에 대한 모드변환에 관하여 고찰하였다. 실험을 위하여 시료로 각 층이 서로 다른 패턴을 갖는 2층의 알루미늄을 가공하여 다층구조물을 제작하였으며, 시료에 횡파를 여기시키기 위하여 초음파변환기의 입사각을 18$^{\circ}$로 사각 입사시킬 수 있는 웨지를 가공하여 수조를 제작하였다. 본 실험에서는 동작주파수가 10MHz인 STAM 시스템을 이용하여 4중 프로젝션에 대한 토모그라픽 데이터를 영상처리하여 토모그라픽 영상을 복원하였으며 이를 기존의 종파를 이용한 토모그라픽 영상과 비교분석한 결과, 콘트라스트와 축방향 분해능이 향상되고 토모그라픽 영상을 복원할 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.529-534
• /
• 2002

유도초음파는 얇은 판재와 다층재료를 평가하는데 널리 사용되는데, 이를 정량적으로 이용하기 위해서는 위상 및 군속도의 분산선도는 필수적이다. 본 연구에서는 후방복사 리키 램파를 이용하여 위상속도 분산곡선과 군속도를 측정하였다. 물에 잠긴 판재에 입사각을 변화 시키면서 판재에서 발생하는 후방복사 초음파 신호를 측정하였고, 후방복사된 초음파 신호는 유도초음파의 분산특성을 지님을 보였다. 입사각도와 수신된 파형의 주파수 분석을 통하여 램파의 위상속도 분산선도를 구하였다. 또한, 특정한 입사각에서 입사점을 변화시키면 서 론 파형의 시간대역 이동으로부터 군속도를 측정하였다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.81-89
• /
• 2008

Atomic behavior during ion beam sputtering was investigated by using classical molecular dynamics simulation. When Ar ion bombards on Au and Pd(001) surface with various incidence energies and angles, some atoms which gained substantial energy by impacting Ar ion were sputtered out and, simultaneously, others were landed on the surface as if surface atoms were redeposited. It was observed that the redeposited atoms are five times for Au and three times for Pd as many as sputtered atoms irrespective of both incidence energy and angle. From sequential ion bombarding calculations, contrary to the conventional concepts which have described the mechanism of surface pattern formation based only on the erosion theory, the redeposition atoms were turned out to play a significant role in forming the surface patterns.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1077-1081
• /
• 2019

Lights that enter the surface of a solar cell cannot be absorbed inside all of the solar cells, and some of it is reflected off the surface of the substrate, resulting in loss. Because of this, many studies are underway to reduce reflective losses on the surface of substrates or to steam the generated charge inside the solar cell. In this paper, surface treatment for forming a rough surface by wet etching the surface of a glass substrate is advanced, and structural characteristics of the rough surface are analyzed. Then, spectral characteristics by changing the angle of the glass substrate to which light enters the company are analyzed. When the light entering the company is investigated on a etched surface, it is confirmed that the probability of re-absorbing the light inside the glass substrate by multiple reflection is increased. When entering the light while changing the angle of the glass substrate, the transmission and reflection performance of the light are not changed.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.107-110
• /
• 2009

The research was about the relation between the dorsal side dose measured by using the phantom body (Alderson Rando Phantom) and factors like contacted material of the patients, the size of the field, angle of incidence. Compared with mylar (tennis racket), the dose on $10{\times}10\;cm^2$ field size of cotton was increased by 2% and by 8% in the case of breast board. In the case of $15{\times}15\;cm^2$ field size, the dose was increased by 6% compared with $10{\times}10\;cm^2$ size. The field size of $20{\times}20\;cm^2$ resulted in 10% increase of dose, while $5{\times}5\;cm^2$ produced 13% decrease. Compared with incident angle $0^{\circ}$, the cases for the incident angle $5^{\circ}$ had 0.4% less dose for breast board, 0.5% for tennis racket, 1.1% for cotton. The cases for the incident angle $10^{\circ}$ had 1.5% less dose for breast board, 1.9% for tennis racket, 2.6% for cotton. For the incident angle $15^{\circ}$, breast board, tennis racket, cotton caused decrease of dose by 3.9%, 2.6%, 3.86% respectively. Resultantly carbon material can cause more skin dose in treatment field. By the results of this study, we recommend that one should avoid the contact between the carbon material and skin.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.4
• /
• pp.117-126
• /
• 1988

The pressure waves scattered by an infinite cylindrical cavity filled with air in a h0mogeneous medium have been calculated for the incident plane pressure waves. For ka = 1/2, 1, 2, 4, 10 and 20, the scattered pressure waves are plotted., where k is the wave number and a is the radius of the cylindrical hole. As an indicator of the directivity of the scattering pattern, we have defined the angle at which the magnitude of the scattered pressure wave decreases by a half(6 dB) with respect to that of the forward peak scattered pressure wave. This angle depends strongly on the values of ka and the distance r, and the angle can be used for the detection of the location and the size of the cavity in a homogeneous medium.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.496-496
• /
• 2012

Sputtering은 박막의 품질(부착력, 밀도, 균일도등)이 우수하고 대면적 증착이 용이하여 반도체, 디스플레이, MEMS기술등과 같은 첨단산업에서 널리 이용되고 있는 증착방법이다. 일반적인 평판형 스퍼터건은 전계와 자계가 직교하는 Target의 일부영역에서만 스퍼터링 현상이 발생하게 되어 증착물질의 사용효율이 20~30% 정도로 좋지 못하고 스퍼터링 되지않는 부분에서는 재증착 현상에 의한 파티클 발생을 유발하여 Substrate에 손상을 입혀 박막의 질을 떨어뜨리게 된다. 본 연구에서는 이러한 문제점들의 물리적 현상의 진단 및 최적화를 위해 Particle-In-Cell (PIC)시뮬레이션을 이용하여 그 특성들을 알아보았다. 인가전압, 압력, 증착물질과 기판사이의 거리를 변화시켜 자기장이 포함된 Paschen curve를 그렸다. 전기장만이 포함된 시스템에서의 Paschen curve는 이미 공식으로 알려져 있으며 마그네트론 스퍼터링의 시스템에서 Paschen curve와 비교하여 보다 낮은 압력에서 플라즈마가 형성할 수 있는 것을 확인하였다. 또한 Target에 충돌하는 아르곤이온의 양, 에너지 분포, 각도의 분포 등을 관찰하였는데, 대부분의 아르곤이온은 압력이 증가할수록 에너지가 큰 경향성을 가지며 입사각도는 Target에 보다 수직으로 충돌하는 경향을 볼 수 있었다. 증착물질과 기판사이의 거리의 변화에 대해서는 이온 특성의 변화는 없었다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.83-89
• /
• 1999

A Unified model for the alpha-particle-induced charge collection has been developed. By accounting for funneling and diffusion charges separately, new model accurately describes the dependence of collected charge on junction size, junction bias, injection energy, injection angle, injection point, and trench oxide depth.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.379-385
• /
• 1994

The sensitivity vector which depends on geometry of object illumination angles and distances of ESPI was analyzed. And the sensitivities of in-plane and out-of-plane displacements have been investigated. From these results, we have the conclusion that it is useful to use the diverging beam for object illumination. With diverging object illumination, only little errors are occurred when we approximate the sensitivity vector to constant all over the object surface.urface.