• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.104-110
• /
• 2006

Growth in population and urbanization has progressively increased the loadings of pollutants from non-point sources as well as point sources. Accordingly, release of contaminants from non-point sources, released with surface runoff of rainwater, is influenced by atmospheric phenomena, geology, and topography. This makes the control of non-point source difficult. Therefore, this study intends to reveal the characteristics of runoff and particle size distribution to observe the fundamental characteristics of runoff. Experiments were carried out at inner road of research center. Average concentration of runoff ranged from 26.8 to 126.4 mg/L for SS and $COD_{Cr}\;15.3{\sim}117.7mg/L,\;TN\;0.07{\sim}5.16mg/L,\;TP\;0.06{\sim}0.49mg/L$ and heavy metals $0.00{\sim}0.29mg/L$. First flush, indicated wash off of pollutant at first rain, was observed for all types of pollutants. Most pollutants revealed a very close correlation with SS ($R^2=0.93{\sim}0.99$). After analyzing characteristics of particle, particle was finer than that from previously examined data.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.381-393
• /
• 2011

This study focus on the surface deterioration diagnosis based on the material characteristics of Taean Dongmunri Maaesamjonbulipsang(rock-carved standing triad Buddha Statue) and the weathering environment analysis. Rock materials of the triad Buddha is coarse-grained biotite granite which is composed mainly of quartz, K-feldspar, plagioclase, biotite and muscovite. The triad Buddha was serious surface irregularity(13.5%), exfoliation(12.3%) and discoloration(46.6%), and the physical characteristics using ultrasonic velocity appeared fourth grade (0.59, highly weathered). Korean style wooden shelter of the triad Buddha(closed type) maintained high humidity environment (daily mean; 86.6%) than exterior environment, and appeared the possibility of deterioration by freezing-thawing because the temperature showed below zero temperatures in winter. The shelter was changed from closed-type to open-type to relieve the moisture problem recently. But the moisture problem is yet to be solved because surface water flowing along northern wayside is flowed into triad Buddha. Therefore, environmental control will need to stop inflow of water into triad Buddha.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.257-262
• /
• 2009

The unified power flow controller(UPFC) is one of the most effective devices in the FACTS family. This paper concerns about a filtering technique for reducing the computer calculation to determine the optimal location of UPFC in a power system. The sensitivities of the power generation cost for UPFC control parameters are evaluated. This technique requires that only one optimal power flow is run to get UPFC sensitivities for all possible transmission lines. To find out a optimal locating of a single UPFC in power system, an ideal transformer model which consists of a complex turns ratio and a variable shunt admittance was used. In this model, the UPFC control variables do not depend on UPFC input and output currents and voltages. The sensitivity method was tested on a 5-bus system derived from the IEEE 14-bus system and IEEE 14-bus system to establish its effectiveness.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.4
• /
• pp.457-466
• /
• 2005

In this paper, we propose a wavelet neural network(WNN) based predictive control method for path tracking of mobile robots with multi-input and multi-output. In our control method, we use a WNN as a state predictor which combines the capability of artificial neural networks in learning processes and the capability of wavelet decomposition. A WNN predictor is tuned to minimize errors between the WNN outputs and the states of mobile robot using the gradient descent rule. And control signals, linear velocity and angular velocity, are calculated to minimize the predefined cost function using errors between the reference states and the predicted states. Through a computer simulation for the tracking performance according to varied track, we demonstrate the efficiency and the feasibility of our predictive control system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.32-40
• /
• 2007

A mobile device accesses large-sized data in object-based IP storage as an object unit over IP network. It relies heavily on a WLAN device, which has been known as one of the major power consumers. This paper designs and implements low-power object-based IP storage for mobile devices using an efficient WLAN power control. The proposed WLAN power control exploits prefetch buffer to maximize the idleness for incoming network traffic and controls available WLAN power modes to minimize the power consumption. Our experimental results reveal that the proposed WLAN control can save the total power consumption in a PXA270-based mobile device about 9% while playing the multimedia contents through an object-based IP storage device

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.547-550
• /
• 2009

This paper presents a digital based input/output interface circuit for controlling and monitoring the Diesel Engine Generator for Emergency. In order to monitor and control of the Emergency Diesel Engine Generator, controlling and monitoring circuits need 5 analog input channels, 2 pick-up coil measuring circuits, 10 digital input channels containing Broken Wire Detect function, and 7 relay control signal output channels. This system performs signal processing of input signal taking advantage of simple filter circuit, photo-coupler and comparator circuit at analog input parts, and output signals for main relay is designed acting by double control, so it prevents malfunction completely. And it improves accuracy of speed input signal by applying digital circuit that processes pick-up coil signal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.26-33
• /
• 2016

Recently, the use of transformer-less UPS has increased to improve the efficiency of UPS. However, transformer-less UPS is required in three-phase four-wire input IGBT PWM rectifier and the existing three-phase three-wire PFC algorithm cannot be applied in the three-phase four-wire system due to the neutral current problem of UPS input. To control the three-phase four-wire input IGBT PWM rectifier, there are two existing algorithms: 3D SVM and single phase control method. These two algorithms have advantages/disadvantages in controlling the rectifier. The single phase control method is unstable for controlling the rectifier and the 3D SVM method has a problem that must increase the L value of the input-side inductor considerably. Therefore, this paper proposes digital single phase control technology and another new algorithm considering the d-q control, to improve the characteristics of the existing control algorithm. In addition, this paper performed a simulation and experiment based on the proposed control algorithm. The simulation results showed that the proposed technology can control three-phase four-wire IGBT PWM rectifier in a stable manner and can also reduce the neutral current. The proposed algorithm is a useful tool for controlling the three-phase four-wire IGBT PWM rectifier.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.605-615
• /
• 2000

Cerebellar model articulation controller (CMAC) is introduced and used for the identification of structural dynamic model. CMAC has fascinating features in learning speed. It can learn structural response within a few seconds. Therefore it is suitable for the real time identification structures. Real time identification is required in the control of structure which may be damaged or undergo severe change in mechanical properties due to shrinkage or relaxation etc. In numerical examples, it is shown that CMAC trained with the dynamic response of three-story building can predict responses under not trained earthquakes with allowable error. Finally, CMAC has great potential in structural and control engineering.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.223-223
• /
• 2016

산업 및 기술의 발전에 의해 많은 신소재들이 개발되고 있다. 그 중에서 금속 나노 분말의 경우, 자성소재, 차세대 MLCC, 전도성 페이스트, 살균 등 여러 산업분야에서 관심을 보이면서, 다양한 재료들이 개발되고 있는 추세이다. 그 중에서 금속 나노 분말은 입자 미세화에 따른 경도, 인성, 연성들의 기계적 특성 향상, 전자기적 기능의 향상 등 기존재료에 비해 우수한 물성, 새로운 기능의 발현이 입증되면서 차세대 소재로서 많은 연구가 진행되고 있다. 또한 최근에는 단순한 나노입자의 제조단계를 뛰어넘어 입경 및 입도의 제어 형상제어를 통한 입자 균일성이 요구되고 있다 DC 열 플라즈마를 이용한 나노입자 합성 방법은 초고온의 온도의 달성이 가능하여, 모든 금속원소에 대한 나노화 및 고순도화가 용이할 뿐만 아니라, 제조공정이 단순한 친환경 공법으로 저비용으로 나노입자를 제조할 수 있는 장점을 갖고 있다. 본 연구에서는 이송식 DC 열 플라즈마를 이용한 Cu 나노분말 제조, 비이송식 DC 열 플라즈마를 이용한 Fe 나노분말 합성 연구를 통해 반응기의 압력과 플라즈마 파워, Gas 유량등의 공정 변수가 나노입자 생성 특성에 미치는 영향을 확인 하였다. 또한 DC 열플라즈마 나노입자 합성 시스템에 대한 장비와 기술도 소개한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.8-8
• /
• 2010

외부전하를 감지할 수 있는 EEPROM 구조를 기반으로 한 센서를 제안하였다. 부유게이트로부터 확장된 큰 면적의 접촉부위 (CCM)는 외부전하를 고정화하도록 설계되었으며, $0.13{\mu}m$ 단일-다결정 CMOS 공정에 적합한 적층의 금속-절연체-금속 (MIM) 제어케이트구조로 구성되었다. N-채널 EEPROM의 CCW 캐패시터 영역에 양의 전압이 인가되면 제어 게이트의 문턱전압이 음의 방향으로 변화하여 드레인 전류는 증가하는 특성을 보였다. 또한 이미 충전된 외부 캐패시터가 CCW의 부유게이트의 금속영역에 직접 연결되면, 외부 캐패시터로부터 유입된 양의 전하는 n-채널 EEPROM의 드레인 전류를 증가시키지만 반면에 음의 전하는 이를 감소시켰다. 외부 전압과 전하에 의해 PMOS의 특성은 NMOS에 비교하여 반대로 나타남이 확인되었다. EEPROM 인버터의 CCW 영역에 외부전하를 연결하면 인버터의 입-출력 특성이 기준 시료에 비해 외부전하의 극성에 따라 변화하였다. 그러므로, EEPROM 인버터는 외부전하를 감지하여 부유게이트에 고정된 전하의 밀도 크기에 따라 출력을 전압으로 표현할 수 있음을 확인하였다.