• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.638-646
• /
• 2018

The purpose of this study was to investigate the long-term habitat morphological alteration resulting from a large dam and weirs in the Tamjin River. To achieve this, we carried out a hydrograph analysis and a substrate size distribution analysis. We also estimated the channel width, bar area and vegetation encroachment using aerial photographs taken before and after the construction of the dam and weirs. The result of the hydrological analysis showed that flooding downstream was greatly reduced with small peaks occurrence after the dam construction. Interestingly, normal hydrographs in the main channel appeared just after tributary conjunction. There was a similar pattern in the substrate size analysis. Despite coarsened substrate just downstream of the dam site, more sand appeared again after introduction of the tributary. However, there was an increase in the bar area downstream of the dam's channels with most bars covered with vegetation. The channel width increased at the upper area of weirs through impoundment, but decreased downstream because of vegetation encroachment. This study indicate that unregulated tributary plays an important role in restoring hydro-physical habitat conditions in mainstream channels below a large dam. However, numerous weirs could be a causal factor to accelerate habitat deterioration in the dam downstream channels.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.23-35
• /
• 2019

Landslides occur due to heavy rainfall in the summer season. Some of water may infiltrate into the ground; it causes a high saturation condition capable of causing a landslide. Soil properties are crucial in estimating slope stability and debris flow occurrence. The main study areas are Gwanaksan, Suraksan and Bukhansan (Mountain) in Seoul. A total of 44 soil samples were taken from the study area; and a series of geotechnical tests were performed. Physical and mechanical properties were obtained and compared based on region. As a result, among well-graded soils, they are classified as a clayey sand. Coarse-grained and fine-grained contents are approximately 95% and 5%, respectively, with very low amount of clay content. Density, liquid limit and dry unit weight are ranged in $2.62{\sim}2.67g/cm^3$, 27.93~38.15% and $1.092{\sim}1.814g/cm^3$. Cohesion and internal friction angle are 4 kPa and $35^{\circ}$ regardless of mountain area. Coefficient of permeability is varied between $3.07{\times}10^{-3}{\sim}4.61{\times}10^{-2}cm/sec$; it means that it results in great seepage. Permeability is inversely proportional to the uniformity coefficient and is proportional to the effective particle size. In the formal case, there was a difference by mountain area, while in the latter, the tendency was almost similar.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1367-1377
• /
• 2020

The purpose of this study is to assess the seismic vulnerability of buildings in Gyeongju city starting with the earthquake that occurred in the city on September 12, 2016, and produce a seismic vulnerability map. 11 influence factors related to geotechnical, physical, and structural indicators were selected to assess the seismic vulnerability, and these were applied as independent variables. For a dependent variable, location data of the buildings that were actually damaged in the 9.12 Gyeongju Earthquake was used. The assessment model was constructed based on random forest (RF) as a mechanic study method and support vector machine (SVM), and the training and test dataset were randomly selected with a ratio of 70:30. For accuracy verification, the receiver operating characteristic (ROC) curve was used to select an optimum model, and the accuracy of each model appeared to be 1.000 for RF and 0.998 for SVM, respectively. In addition, the prediction accuracy was shown as 0.947 and 0.926 for RF and SVM, respectively. The prediction values of the entire buildings in Gyeongju were derived on the basis of the RF model, and these were graded and used to produce the seismic vulnerability map. As a result of reviewing the distribution of building classes as an administrative unit, Hwangnam, Wolseong, Seondo, and Naenam turned out to be highly vulnerable regions, and Yangbuk, Gangdong, Yangnam, and Gampo turned out to be relatively safer regions.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.43-57
• /
• 2022

Advances in measurement techniques have reduced measurement costs and enhanced safety resulting in less uncertainty. For example, an acoustic doppler current profiler (ADCP) based suspended sediment concentration (SSC) measurement technique is being accepted as an alternative to the conventional data collection method. In Korean rivers, horizontal ADCPs (H-ADCPs) are mounted on the automatic discharge monitoring stations, where SSC can be measured using the backscatter of ADCPs. However, automatic discharge monitoring stations and sediment monitoring stations do not always coincide which hinders the application of the new techniques that are not feasible to some stations. This work presents and analyzes H-ADCP-SSC models for 9 discharge monitoring stations in Korean rivers. In application of the Gaussian mixture model (GMM) to sediment-related variables (catchment area, particle size distributions of suspended sediment and bed material, water discharge-sediment discharge curves) from 44 sediment monitoring stations, it is revealed that those characteristics can distinguish sediment monitoring stations regionally. Linking the two results, we propose a protocol determining the H-ADCP-SSC model where no H-ADCP-SSC model is available.

• Ecology and Resilient Infrastructure
• /
• v.9 no.2
• /
• pp.83-92
• /
• 2022

The 2020 summer extreme flood severely disturbed the riparian ecosystem of the Seomjin River. Some trees were killed by the flood impact, whereas others have recovered through epicormic regeneration after the disturbance. At the same time, several tree individuals newly germinated. This research aimed to explain the recovery of the riparian ecosystem by spatial proximity between each tree individual of different characteristics, such as "dead", "recovered", and "newly germinated". A spatial point pattern analysis based on K and g-functions revealed that the newly germinated trees and the existing trees were distributed in the spatially clumping patterns. However, further detailed analysis revealed that the new trees were statistically less attracted to the recovered trees than the dead trees, implying competitive interactions hidden in the facilitative interactions. Habitat amelioration by the existing trees positively affected the growth of the new trees, while "living" existing trees were competing with the new trees for resources. This research is expected to provide new knowledge in this era of rapid climate change, which likely induces stronger and more frequent natural disturbance than before. Environmental factors have been widely used for ecosystem modeling, but species interactions, represented by the relative spatial distribution of plant individuals, are also valuable factors explaining ecosystem dynamics.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.685-696
• /
• 2022

Although the use of pottery-making soils has a long history, its use in the pottery industry requires that physical and geotechnical properties of the materials be established to define the suitability for various purposes. The main purpose of this study is to identify the different types of clays and mineral composition and to perform the geotechnical evaluation of the clays for making pottery products. Soils investigated in this study include raw materials used for making Baekja (white porcelains), Chungja (celadons), Buncheong, Sancheong, and Johyung. Pottery-making soils are manufactured by using different types of soils and sold by individual ceramic clay company. This study includes physical tests of soil and chemical analysis of major elements using XRF and XRD instrumentation. Grain size distributions, mineralogical composition, and a range of plasticities of soils for making different types of potteries are presented. Correlations between specific type of pottery clays and geotechnical and mineralogical characteristics are determined by comparing the test results. Since quantitative research using laboratory tests for pottery-making soils are rarely performed in Korea, further research should be done in the future to improve the Korean pottery industry.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.5
• /
• pp.323-332
• /
• 2022

Objectives: This study aims to confirm the educational necessity and utilization of VR media. And it was conducted to prepare basic data necessary for the use of VR in various dental hygiene education in the future and the development of innovative practical training courses. Methods: Before and after using VR in oral radiology practice classes, learning interest (4 items), learning commitment (9 items), learning motivation (5 items), educational media preference (4 items), and satisfaction (10 items) were investigated and analyzed. Friedman two way ANOVA by ran a nonparametric analysis corresponding to repeated measures ANOVA was performed. The statistical significance level was 0.05. Results: It was found that there were statistically significant differences in learning interest, learning immersion, and learning motivation according to the type of oral radiology practice education medium (p<0.05). Conclusions: VR is expected that the use of learning media using VR will lead to students' interest, immersion, and learning motivation in class, and that positive learning effects on VR education media can be sufficiently obtained.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.253-263
• /
• 2022

This study suggests a guideline for designing unit process of wastewater reuse in terms of a maintenance of the process based on critical parameters to draw a high quality performance of RO unit. Defining the parameters was done by applying membrane integrity test (MIT) in pretreatment process utilizing lab-scale MF. SDI is utilized for judging whether permeate is suitable to RO unit. However, result said TOC concentration matching with particle count analysis is better for judging the permeate condition. When membrane test pressure (P_test) was measured to derive log removal value in PDT, virgin state of membrane fiber was used to measure dynamic contact angle utilizing surface tension of the membrane fiber. Actually, foulant affects to the state of membrane surface, and it decreases the P_test value along with time elapsed. Consequently, LRV_DIT is also affected by P_test value. Thus, sensitivity of direct integrity test descends with result of P_test value change, so P_test value should be considered not the virgin state of the membrane but its current state. Overall, this study focuses on defining design parameters suitable to MF pretreatment for RO process in wastewater reuse by assessing its impact. Therefore, utilities can acknowledge that the membrane surface condition must be considered when users conduct the direct integrity test so that P_test and other relative parameter used to calculate LRV_DIT are adequately measured.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.55-62
• /
• 1994

The germplasms of naked barley evaluated for starch content were 137 crossing blacks and progeny lines obtained from the breeding program of the Wheat and Barley Research Institute, 540 Tabdong Kwonsungu Suwon, in the 1988/1989 season. Starch content was distributed between 49.15 and 62.50% with a mean of 57.20%. It was high in the bred lines and the Uz type lines than the imported, uz type or lax type ones. The range observed for seed coat weight was 1.12-3.02mg and the mean seed coat weight was 1.88mg. The seed coat weight ratio to kernel weight was measured between 4.0 and 8.7% with a mean of 6.5%. The varieties differ greatly in the characteristics depending on the plant type and origin of germplasms. The variation observed with protein content ranged from 9.60 to. 15.90% while the average was 12.86%. Starch content was negative relationships with kernel weight, seed coat weight, seed coat weight ratio., kernel width, kernel thickness and protein content, and starch content was higher in smaller kernels within a variety. The weight and weight ratio. of seed coat were positively correlated with the width, thick-ness of kernels, whilst they were negatively correlated with starch content. The heritability of starch content was 30.0%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.731-737
• /
• 1995

This experiment was carried out at National Crop Experiment Station in 1994 to obtain basic information of growth characters and yield of rice under various nitrogen split application methods on different soil textures in direct seeding on dry paddy. Hwaseongbyeo sown on April 27 by flat drill seeding, and irrigation was done at 3 leaf stage after seedling establishment. Number of seedling stand was 159~177 seedlings per $m^2$ regardless of soil texture and nitrogen application method. Number of panicle per unit area in loam was higher than in sandy loam, and it also was higher in top dressing plots, which were 3 times application at rate of 40-30-30% (3rd leaf stage -7th leaf stage -panicle initiation stage) and 4 times application 10-30-30-30%(basal-3rd leaf stage -7th leaf stage -panicle initiation stage), than in conventional method. Leaf colour, leaf area index and dry matter production at heading stage were highest at top dressing plots among the nitrogen application methods in both sandy loam and loam. Lodging index in top dressing plots increased by low breaking weight with long culm. There were field lodging of degree 3 in top dressing plots. Rice yield in sandy loam, loam increased by 7~9%, 6~9% in top dressing of nitrogen, respectively.