• Title/Summary/Keyword: 임피던스특성

Search Result 1,640, Processing Time 0.028 seconds

A Study on Improving Impedance Characteristics of Planar Monopole Antenna with Vertical Ground Plane (수직 접지면을 갖는 평판형 모노폴 안테나의 임피던스 특성 개선에 관한 연구)

  • Jung, Jin-Woo;Lee, Hyeon-Jin;Lim, Yeong-Seog
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.48 no.5
    • /
    • pp.54-63
    • /
    • 2011
  • This paper presents the improving impedance charactersitics of a planar monopole antenna with a vertical ground plane. For improving impedance characteristics, we used the effect of a vertical ground plane. To analyze the effect of vertical ground plane, we proposed the dipole antenna mode. the impedance characteristics of planar monopole antenna are improved by correlation between monopole antenna and vertical ground plane, based on each operating mode. Our analysis indicates can improve the impedance characteristics of varying planae monopole antennas.

Microstrip Line Sensor of Partial Discharge for Rotating Machine (회전기내 부분방전 검출을 위한 마이크로스트립 라인 센서)

  • Heo, Chang-Keun;Kim, Yong-Joo;Kang, No-Weon;Kang, Dong-Sik;Chae, Soo-Jeong;Jung, Hyun-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2003.07c
    • /
    • pp.1855-1857
    • /
    • 2003
  • 부분방전시험은 고전압 고정자 권선의 절연상태를 검사, 평가 할 수 있는 중요한 수단이다. 전동기와 발전기에서 일어나는 절연 악화의 징후로써 부분방전이 발생되며, 이러한 부분방전 신호를 검출하기 위한 센서로 SSC(Stator Slot Couple)를 사용한다. 하지만 현재 사용되고 있는 대부분의 SSC의 경우 설계에 있어 특성 임피던스가 실제구조에서 정확히 고려되지 않는 경향이 있다. 실제로 고정자 슬롯에 부착된 마이크로스트립 센서의 특성 임피던스는 정확히 50옴으로 정합 되지 않으며 이것은 센서의 성능에 중요한 영향을 미치게 된다. 그러므로 본 논문에서는 부분방전 센서의 성능을 개선시키기 위해 결합 전송선로(Coupled transmission line)를 이용한 임피던스 정합회로를 제안하고자 한다. 제안된 센서의 성능을 입증하기 위하여 고정자 슬롯에 설치된 기존의 SSC와 임피던스 정합회로를 부착한 센서를 시뮬레이션 한 후 비교 분석하였다. 결과적으로 제안된 정합 회로는 광대역 임피던스 정합 특성을 가지며 임피던스 부정합 때문에 일어나는 기존 SSC의 성능 악화를 개선할 수 있었다.

  • PDF

Analysis of Multi-stage Stepped Impedance Resonator for Application of Multi-band Devices (다중 대역 소자 응용을 위한 다단 계단형 임피던스 공진기의 해석)

  • Yun, Tae-Soon
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.11 no.5
    • /
    • pp.97-102
    • /
    • 2012
  • In this paper, each electrical length and harmonics of the multi-stage SIR are calculated by using the input impedance for the variable application of SIR in the microwave systems. The size reduced ratio of the SIR is slightly reduced as increasing of the number of stage. The impedance ratio between lower and higher impedance of the SIR has the dominant effect on the size reduced ratio and harmonic characteristics. Also the equivalent impedance of the SIR is a geometric mean between lower and higher impedance and the quality factor of the SIR is similar to the half-wavelength resonator's.

an Analysis of the Variation on the Impedance Characteristic according to Effective Area of Globe Control Valve at Low Frequency Perturbation (저주파 압력섭동에서 글로브 제어밸브의 유효 단면적에 따른 임피던스 특성 변화 해석)

  • Park, Seungsoo;Yoon, Woongsup;ohm, Wonsuk
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2017.05a
    • /
    • pp.718-723
    • /
    • 2017
  • In this paper, Analytical study is carried out on the impedance characteristics of the globe control valve, which is mainly used for thrust control in liquid rockets, according to the effective area at low frequency perturbation. The impedance tends to increase according to effective area and the cause of impedance characteristic change through flow field visualization is investigated. In the future, the information on the change in the impedance characteristics of the control valve can be used to obtain the impedance of the supply system and it can be utilized to predict pogo phenomenon as well as design accumulator and orifice to reduce the pogo phenomenon.

  • PDF

Analysis of Electro-Mechanical Impedance Characteristics according to the change in stress of beam-type structures (보 구조물의 응력 변화에 따른 구조역학적 임피던스의 특성 분석)

  • Lee, Po-Young;Park, Jae-Hyung;Nguyen, Khac-Duy;Kim, Jeong-Tae
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2011.04a
    • /
    • pp.299-302
    • /
    • 2011
  • 본 논문에서는 보 구조물의 응력 변화에 따른 구조역학적 임피던스의 특성을 분석하였다. 이를 위해 다음과 같은 연구가 수행되었다. 먼저 외팔보 형식의 알루미늄 보에 PZT센서와 strain gage를 부착하고, 하중을 단계적으로 증가시키면서 임피던스를 계측하였다. 다음으로 strain gage에서 계측된 변형률과 PZT로 부터 계측된 임피던스 사이의 관계를 분석하였다. 마지막으로 수치해석을 통해 변형률과 임피던스의 관계를 분석하여, 실험결과와 비교하였다.

  • PDF

Wideband Impedance Transformer Using a Coaxial Cable (동축선을 이용한 광대역 임피던스 트랜스포머)

  • Park, Ung-Hee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.15 no.4
    • /
    • pp.789-794
    • /
    • 2011
  • A coaxial-cable impedance transformer used in wideband frequency range is generally restricted to the fixed impedance transformation ratio as n2:1 or 1:n2(n: the number of coaxial cables). In this paper, we propose a new coaxial-cable impedance transformer to have an arbitrary impedance transformation ratio. We have fabricated three impedance transformers($50-{\Omega}$ to $25-{\Omega}$, $50-{\Omega}$ to $20-{\Omega}$ and $50-{\Omega}$ to $9-{\Omega}$) to confirm the operation characteristic of the suggested impedance transformer. The reflection characteristics (S11) of the fabricated $50-{\Omega}$ to $25-{\Omega}$ and $50-{\Omega}$ to $20-{\Omega}$ impedance transformer were less than -15dB over about 3-octaves frequency range and the reflection characteristic (S11) of the fabricated $50-{\Omega}$ to $9-{\Omega}$ impedance transformer was less than -15dB over about 1-octave frequency range, respectively.

Impedance measurements of solid electrolyte (고체 전해질의 임피던스 측정법)

  • 구할본;김현철
    • Electrical & Electronic Materials
    • /
    • v.7 no.6
    • /
    • pp.543-548
    • /
    • 1994
  • 전기화학반응은 일반적으로 반응속도가 전류에, 반응의 구동력이 과전압에 대응하기 때문에 전류 또는 전위의 경시적 변화로 부터 적극 반응기구나 반응의 과정을 해석하는 법이 널리 이용되고 있다. cyclic voltammetry과 chrono-potentiometry을 비롯한 시간영역에서의 해석에 대해, 전극계의 동적인 특성을 주파수 영역에서 해석하는 것도 가능하며 교류임피던스법이 가장 잘 알려진 방법이다. 여기서는 교류임피던스법의 고찰법, 기본적인 측정법, 몇개의 계에 있어서 임피던스 특성 및 그 방법의 새로운 전개에 대해서 설명한다.

  • PDF

The analysis of the operating characteristic for the wideband coaxial line impedance transformer (광대역 동축선로 임피던스 변환회로의 동작 특성 분석)

  • Park, Ung-hee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.2
    • /
    • pp.165-172
    • /
    • 2019
  • Using two or more coaxial lines, if one port is connected in series and the other port is connected in parallel, it can be implemented the wideband transmission line transformer(TLT). Because the wideband TLT utilizes the outer conductor of the coaxial line, it is difficult to predict the characteristics. In this paper, based on the analysis for the transfer characteristic(S21) according to the loss of the each line in ${\lambda}/4$-microstrip line TLT, the operating characteristic of the fabricated wideband 4:1 TLT using two $25{\Omega}$-coaxial lines is investigated. The fabricated wideband TLT shows the notch characteristic in which the transfer signal sharply decreases at ${\lambda}/4$ frequency of the coaxial line and has a value within -0.2dB of the transfer characteristic(S21) in $0.06{\sim}0.2{\lambda}$ frequency range of the coaxial line. This transfer characteristics(S21) can change the operating frequency range slightly and set the optimum transfer characteristic(S21) at the desired frequency by changing the length of the microstrip line.

A note on the characteristics of acoustic impedance using reflection model including the shear properties of seabed (해저 탄성을 고려한 반사계수 모델을 이용한 음향 임피던스 변화 특성 고찰)

  • Lee Seongwook;Hahn Jooyoung;Na Jungyul
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.161-162
    • /
    • 2004
  • 탄성 매질에서의 음파 반사 특성에 나타나는 임피던스 변화 특성을 고찰하였다. 접지각이 작은 영역에서의 임피던스 값은 접지각에 관계없이 거의 일정한 값을 가지고 해저면 Type 변화에는 민감하게 변화하는 특성을 나타내었다.

  • PDF

Signal Transmission Characteristics Improvement of Serial Advanced Technology Attachment Connector (SATA 커넥터의 신호 전달 특성 개선)

  • Yang, Jeong-Kyu;Kim, Moon-Jung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2012.05b
    • /
    • pp.800-803
    • /
    • 2012
  • 본 논문에서는 SATA(Serial Advanced Technology Attachment) 커넥터의 차동 임피던스를 정합하여 신호 전달 특성을 개선한다. 3차원 FEM(Finite Elements Method) 전자기장 시뮬레이터를 이용하여 SATA 커넥터의 차동 모드 S-파라미터를 추출하고, 신호 전달 특성을 분석한다. SATA 커넥터의 반사 손실 ($S_{dd11}$)은 5 GHz 까지 20 dB 이하의 값을 나타내고, 삽입 손실($S_{dd21}$)은 0.1 dB 이하의 값을 나타낸다. 또한 인덕턴스, 커패시턴스, 상호 인덕턴스, 상호 커패시턴스를 추출하여 차동 임피던스를 계산한다. SATA 커넥터의 차동 임피던스는 107.3 ${\Omega}$으로 부정합이다. 차동 임피던스를 정합하기위해서 커넥터 신호 핀을 dx 방향으로 설계 변경한다. $d_x$ 방향으로 0.04 mm 증가 시켰을 때 차동 임피던스가 99.5 ${\Omega}$으로 최적으로 정합되었다. 또한 반사 손실은 1.5 GHz 에서 11 dB 개선되고, 삽입 손실은 최대 약 0.05 dB 개선되었다.

  • PDF