• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.243-251
• /
• 2008

A subgingival crown-root fracture presents a restorative problem to the clinician because restoration is complicated by the need to maintain the sound tooth structures. Forced eruption offers a method of treatment of teeth fractured close to the alveolar crest. Extrusion of such teeth allows elevating the fracture line above the epitherial attachment and so the proper finishing margins can be prepared. The purpose of this case is to report successful tooth restoration using forced eruption in case of crown-root fractures.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.503-511
• /
• 1998

In this study, the stress distribution for different tibial components was observed In order to Investigate the load transfer and potential failure mechanism of the tibial components subjected to dynamic impact loading and also to evacuate the effect of bone-implant bonding conditions on the implant system. The 3-dimensional finite element models included an intact tibia, cemented metal-backed tibial component, uncemented metal-blocked tibial component, cemented all-polyethylene tibial component, and metal-backed component with a debonded bone/stem interface. The results showed that the cemented metal-hocked component Induced slightly higher peak stress at stem tip than the uncemented component. The peak stress of the all-polyethylene tibia1 component at stem trip showed about half thats of metal-backed tibial components. The all-polyethylene component showed a similar dynamic response to intact tibia. In case of debonded bone/stem interface, the peak stress below the metal tray was three times Higher than that of the fully bonded interface and unstable stress distribution at the stem tip was observed with time, which causes another adverse bone apposition and implant loosening. Thus, the all-polyethylene tibial component bonded fully to the surrounding bone might be most desirable system under an impact loading.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.88-94
• /
• 2020

Purpose: The purpose of this study was to analyze the sagittal root position of maxillary anterior teeth and report the frequency of each classification in Korean for immediate implant placement. Materials and Methods: A retrospective review of cone-beam computed tomography (cone-beam CT) images was conducted on 120 patients (60 male and 60 female) who fulfilled the inclusion criteria. After reorientation of the axis, cone-beam CT images were evaluated and the relationship of the sagittal root position (SRP) of the maxillary anterior teeth to its associated osseous housing was recorded. Class I, II, and III were classified respectively when the root was positioned on the labial, central, and palatal aspect of the alveolar bone. Class IV was the position that at least two thirds of the root is engaging both the labial and palatal cortical plates. Then, the angulation of the root axis and the alveolar bone axis was measured. Descriptive statistics and Kruskal-Wallis test were used to compare the angulation according to the root position and SRP class. Results: The frequency distribution of sagittal root position of maxillary anterior teeth indicated that 81.1%, 10.3%, 1.9%, and 6.7% were classified as Class I, II, III, and IV, respectively. The sagittal angulation at approximately 77.5% of central incisor, lateral incisor, and canine was < 20 degrees, but the angle at more than 42.7% of canine was ≥ 20 degrees. Within the class, the angulation was statistically significantly greater in Class I (16.19) compared to Class II (8.72) and Class III (9.93), and smaller in Class IV (3.79). Conclusion: Within the limitation of this study, a majority of the maxillary anterior roots were positioned close to the buccal cortical plate. However, some roots have very thin alveolar bone and sagittal angulation larger than 30 degrees. Therefore, cone-beam CT analyses of the sagittal root position and the sagittal angulation are recommended for the selection of the appropriate dental implant treatment approach.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.415-421
• /
• 2021

The biomechanical prognosis of conventional removable partial denture is questionable in case of patient with few remaining teeth or periodontally compromised teeth. In this case, hybrid telescopic double crown RPD may be a successful treatment alternative. Hybrid telescopic double crown RPD has following advantages over conventional RPD: secondary splinting effect between abutments, more vertical stress direction and more convenient in repairing the denture after extraction of abutment tooth. In this clinical case, patient had deep overbite in anteriors and partially edentulous. The maxilla was restored with hybrid telescopic double crown RPD and the mandible was restored with implants and fixed prostheses. Long-term follow-up and supportive periodontal treatment were performed, and satisfactory results were achieved in terms of function and aesthetics.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.273-285
• /
• 2000

The aim of this investigation was to evaluate the differences of two canti-leyer springs by using a new simulation system. This was done using a Calorific machine that compared iron uprighting spring and root uprighting spring. The Calorific machine was designed to allow observation of the whole process of tooth moving, and is composed of three parts(a temperature regulating system, electro-thermodynamic teeth, and an artificial alveolar bone component). The experiment of both mechanics were repeated five times and measured two times. The intra-examiner agreement and inlet-examiner agreement were $96.54\%\;and\;95.73\%$ and these data were statistically tested by paired t-test. The obtained results were as follows. 1. Distal and buccal movement of the anchor teeth were observed greater in the root uprighting spring than the crown uprighting spring. 2. Crown uprighting spring showed distal movement of the crown of lower second molar for 3.29mm but root uprighting spring showed only 1.68mm. 3. Crown uprighting spring exhibited forward movement of mesial and distal root of the lower second molar for 3.91mm, 3.60mm but the root uprighting spring showed 6.76mm, 6.26mm.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.280-287
• /
• 2010

Objective: In spite of increasing dental treatment for the disabled, there was a few collected data on dental treatment status and dentists' perception in Korea. The purpose of this' study is to research the current dental treatment status for the disabled in Korea and to suggest public health policies for the disabled. Material and methods: Total of 68 dentists who have treated the disabled regularly were asked to fill questionnaires regarding dental treatments for the disabled. Results: 1. It is necessary to set up public dental center for the disabled in rural area. 2. In case of dental treatments relating to cerebral palsy, ADHD, autism, the compensation for treatment time and extra investment is needed. 3. Only 39.7% of dentists charged treatment fees to the disabled as same as normal patients. Moreover 38.2% of dentists answered that they didn't charge treatment fees at all when their patient are disabled. 4.23.5% of dentists provided all of dental treatments including dental implant and orthodontic appliances in Korea. However, 54.3% of dentists reported the improvement of access to dental implant, orthodontic and esthetic treatment is needed. 5. It is imperative for the government to improve the support system for the disabled. Conclusions: Through this research only 26.5% of dentists answered that they had received the fund from the government and 11.1% of them were satisfied with the support for the disabled in Korea. This indicated the improvement of government financial support system for the disabled is needed.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.379-388
• /
• 2002

For the success of dental implant, accurate radiographic evaluation is prerequisite for planning the location of the osseointegrated implants and avoiding injury to vital structures. CT/MPR(computed tomography/multiplanar reformation) shows improved visualization of inferior alveolar canal. In order to obtain cross-sectional images parallel to the teeth, the occlusal plane is used to orientate for the axial plane. If the direction of axial plane is not parallel to the occlusal plane, the reformatted cross-sectional scans will be oblique to the planned fixture direction and will not show the actual dimension of the planned fixture's location. If the available bone height which measured in the cross-sectional view is much greater than the actual available bone height, penetration of canal may occur. The aim of this study is to assess the effect of the axial plane to measurement of available bone height for dental implant in computed tomography of the mandible. 40 patients who had made radiographic stents and had taken CT were selected. The sites that were included in the study were 45 molar regions. In the central panoramic scan, the length from alveolar crest to superior border of inferior alveolar canal(available bone height, ABH) was measured in direction of reformatted cross-sectional plane(uncorrected ABH). Then, length from alveolar crest to superior border of canal was measured in direction of stent(corrected ABH). The angle between uncorrected ABH and corrected ABH was measured. From each ABH, available fixture length was decided by $Br{{\aa}}nemark$ system. The results were following ; the difference between two ABHs was statistically significant in both first and second molar(p< 0.01). The percentage of difference more than 1 mm was 8.7% in first molar and 15.5% in second molar. The percentage of difference more than 2 mm was 2.0% in first molar and 6.6% in second molar. The maximum value of difference was 2.5 mm in first molar and 2.2 mm in second molar. The correlations between difference of 2 ABHs and angle was positive correlations in both first and second molar. The correlation coefficient was 0.534 in first molar and 0.728 in second molar. The second molar has a stronger positive correlation. The percentage of disagreement between 2 fixture lengths from two ABHs was 24.4% in first molar and 28.9% in second molar.

• Journal of Oral Medicine and Pain
• /
• v.35 no.4
• /
• pp.245-258
• /
• 2010

Smoking has been identified not as a major risk factor for circulatory and respiratory diseases but also as causes of various oral diseases. A number of clinical studies and regional health surveys have found an association between smoking and poor oral health status and between smoking and prognosis of dental treatments. However, there is few studies about status of smoking cessation treatment and policies in dentistry in Korea. The purpose of this study was to investigate the smoking patterns of outpatients and outcomes of short-term smoking cessation treatment in dental hospitals in Korea and, subsequently, to seek further smoking cessation services in dentistry. This study was sponsored by Korean Dental Association (KDA) and department of culture and welfare. 825 dental patients were voluntarily participated in a 4-week smoking cessation program with nicotine patch and 297 participants of them completed on smoking-related questionnaires. All participants were recruited from outpatients of 11 dental university hospitals (primarily in the department of oral medicine, oral surgery and periodontology) in Korea during 3-month period from October 2009 to January 2010. The Questionnaires included demographics, duration of smoking, heavy smoking index (HSI), number of thinking of quit smoking, duration of stop smoking and reasons to smoking, awareness of smoking effects on oral health, and their success rate after 4 weeks of nicotine patch program was investigated. The statistical analysis was carried by SPSS version 18.0 program and Chi-square test. According to the results of this study, male in their 30s to 50s were the most prevalent of all the participants and duration of smoking increased with age. Attempt rate to quit smoking (Quit smoking) was the highest in 30s and 40s with duration of quit smoking ranging 1 to 3 months. Emotional stresswas the most frequently reported reason for smoking, followed by habit and pleasure in order. All age group showed high HIS over 71% and awareness of smoking effects on oral diseases such as oral soft tissue diseases, periodontal diseases and dental caries was found relatively high (50~60%) Periodontal implant was the main reason for participation in the smoking cessation services in dental clinics and the success rate of, 4-week nicotine patch program of all the participants was 29.4%, extremely low compared to that of medical clinics. Systemic education for dentists to be able to provide interventions to quit smoking including counseling with the 5As'and development of available measures for smokers is needed as considered that the low success rate of the smoking cessation services in dentistry could be explained mainly by lack of dentists' strategies, experience and attention. Awareness and attention of dentists should be emphasized and their participation be encouraged by long-term, multidisciplinary policies such as establishment of insurance fee, which would made a considerable progress in preventing smoking-related oral diseases and promoting public oral health.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.167-174
• /
• 2013

Purpose: This study was conducted to evaluate the roughness and surface alternations of three differently blasted titanium discs treated by $Nd:YVO_4$ Laser irradiation in different conditions. Materials and methods: Thirty commercially pure titanium discs were prepared and divided into three groups. Each group was consisted of 10 samples and blasted by $ZrO_2$ (zirconium dioxide), $Al_2O_3$ (aluminum oxide), and RBM (resorbable blasted media). All the samples were degreased by ultrasonic cleaner afterward. Nine different conditions were established by changing scanning speed (100, 300, 500 mm/s) and repetition rate (5, 15, 35 kHz) of $Nd:YVO_4$ Laser (Laser Pro D-20, Laserval $Korea^{(R)}$, Seoul, South Korea). After laser irradiation, a scanning electron microscope, X-ray diffraction analysis, energy dispersive X-ray spectroscopic analysis, and surface roughness analysis were used to assess the roughness and surface alternations of the samples. Results: According to a scanning electron microscope (SEM), titanium discs treated with laser irradiation showed characteristic patterns in contrast to the control which showed irregular patterns. According to the X-ray diffraction analysis, only $Al_2O_3$ group showed its own peak. The oxidation tendency and surface roughness of titanium were similar to the control in the energy dispersive X-ray spectroscopic analysis. The surface roughness was inversely proportional to the scanning speed, whereas proportional to the repetition rate of $Nd:YVO_4$. Conclusion: The surface microstructures and roughness of the test discs were modified by the radiation of $Nd:YVO_4$ laser. Therefore, laser irradiation could be considered one of the methods to modify implant surfaces for the enhancement of osseointegration.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.272-279
• /
• 2015

This study was conducted to provide baseline data which could suggest a direction of role based efficient integrated clinical education by avoiding duplicate of contents through analyzing clinical courses. Among the 7 clinical courses, orthodontics and periodontology were the most published subjects which were published in 5 kinds of books and dental materials was the least published subject which was published in 2 kinds of books on investigation of overlapping contents based on titles that appeared on chapters and verses of all textbooks for clinical courses. Dental implant was covered in 4 subjects such as oral maxillofacial surgery, prosthodontics, periodontology and dental materials which was the most number. Other overlapping contents were restoration treatment, occlusion and malocclusion, temporomandibular joint diseases, anesthesia sedation, tooth trauma, systemic disease and dental treatment, dental casting, isolation techniques, tooth bleaching, pulp protection, gingivitis periodontitis, tooth development, etc. Reviews of textbooks of clinical courses should be conducted in a detailed manner by systematic, various studies in order to improve quality of the textbooks.