• The KSFM Journal of Fluid Machinery
• /
• v.14 no.1
• /
• pp.5-10
• /
• 2011

MTG(Micro turbine generator) operating at 400,000 rpm is under development and the impact test rig to measure the dynamic stiffness and damping coefficient of air foil bearing for high speed rotor is presented in this study. The stiffness and damping coefficient of air foil bearing depending on the rotational speed can be measured easily and effectively by using the simple configuration of impact test rig which is composed of air gun, gap sensors and high speed motor. The estimation results of stiffness and dampling coefficient using least square estimation method is presented as well.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.10 s.103
• /
• pp.1160-1168
• /
• 2005

Floor impact noise isolation performance of reinforced concrete floors was investigated through new measurement method using impact bail. Strong impact force in Bow frequency band below 63 Hz of bang machine is not similar to human impact source and causes some problem in evaluating heavy-weight Impact noise but heavy-weight impact noise measurement and evaluation using impact ball which is very similar to human impact is more reliable than bang machine. Correction value on the background noise and sensitivity of residents should be considered on the floor impact noise evaluation classes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.297-297
• /
• 2004

선진국 및 국내에서도 붐이 일고 있는 스포츠 중에서 골프는 빼놓을 수 없는 위치의 스포츠이다. 그러나 골프는 필드에서 클럽만을 가지고 즉시 경기를 할 수 있는 운동이 아니다. 필드에 나가기 전 많은 연습과정을 통해 충분한 자세의 습득과 정확한 샷을 할 수 있는 운동의 선행 과정을 먼저 거쳐야 한다. 그러나 골프의 자세를 교습하기 위해서는 지도자의 직접적인 교정이 필수적 이였으나 이는 교습비의 부담 증가로 이어져 골프를 대중화하기 어렵게 하는 한 가지 요인 이였으며, 또한 타격 연습을 위한 기존의 골프 연습기는 단순히 공을 타격위치에 가져다 놓기만 할 뿐이기 때문에 연습자 자신의 자세를 확인할 수 없어 잘못된 자세를 익히게 되는 경우가 발생한다.(중략)

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.179-186
• /
• 2004

본 연구의 목적은 숙련된 골프선수들의 골프 스윙동작 시 상이한 무게중심 변환 형태가 존재하는지 그리고 만약 이 상이한 무게중심 변환 형태가 존재한다면 어떤 형태로 나타나는지를 알아보고자 하였다. 본 실험을 위해 13명의 남자 대학 엘리트 골프 선수들을 대상으로 드라이버를 이용한 스윙을 실시하게 하였다. 수직 지면 반력과 압력중심 이동 패턴을 측정하기 위해 지면반력기 2대와 스윙 동작 시 critical event 설정을 위해 1대의 고감도 비디오 카메라를 사용하였다. 또한 스윙 결과로 나타나는 비거리, 클럽헤드 속도를 측정하기 위해 스윙 분석기를 이용하였다. 피험자 간 상호 비교를 위해 측정된 수직 지면반력 성분은 몸무게를 이용하여 표준화하였고 압력중심은 어드레스시의 압력중심을 원점으로 재 계산하였다. 또한 임팩트 시 측정된 좌우 수직 지면반력 성분을 이용하여 두 가지의 상이한 스윙 스타일로 구분하였다. 연구결과 8명(62%)의 피험자에게서 좌측 수직력 성분이 상대적으로 높은 전족(FFS) 스타일임이 밝혀졌고 5명(38%)은 그 반대인 리버스(RFS) 스타일임이 밝혀졌다. 이 전족 스타일은 대부분의 골퍼들이 선호하고 또 그렇게 하여야만 한다고 믿고 있는 스윙방식이다. 이와 반대인 리버스 스타일은 코치들이 금기시 하는 스윙의 형태로서 초보자, 즉 비숙련 자에게만 나타나는 전형적인 스윙형태라고 인지되고 있다. 하지만 이 두 가지 스윙 스타일이 초보자가 아닌 숙련된 골프 선수들에게서도 실제 존재한다는 것이 본 실험 결과로 나타났다. 평균 압력중심 이동 패턴은 전후축 방향의 경우 RFS 스타일 그룹이 RFS 스타일 그룹에 비해 압력중심 이동이 크게 나타났고 좌우축의 경우에도 RFS 그룹이 FFS 그룹에 비해 압력중심 이동이 크게 나타났다. 특히 임팩트 시 압력중심의 위치가 FFS 그룹은 전족 근처에 있는 반면 RFS 그룹은 후족(rear foot)에 위치하여 두 스윙 스타일의 차이점을 분명하게 보여주었다. 따라서 비록 이 RFS 스타일이 대부분의 코칭 이론과는 상반되는 무게중심 이동 패턴을 보여주었지만 이 스윙 스타일이 잘못된 것이 아닌 실제 존재하는 하나의 스윙 스타일로 인식하여 스윙 지도 시 이에 알맞은 적절한 교습법을 마련해야 할 것이다.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.91-107
• /
• 2002

This research got the following conclusion as result that analyzed high clear action kinematically to 4 C girls' junior high school badminton players who are situated in Chungchong-bukdo. 1. Most of the subject didn't rotate their right shoulder and elbow joint at back swing and moved speedy to shuttle cock. And an cooperation action of joint decreases displaying only a good action on both subject`s specification joint part. 2. When the subject S1 and S2 swing slowly and largely the joint of shoulder and elbow and then the speed of right wrist and racket head is fast, the cooperation action of joint is better than other subject. 3. An angle change of right shoulder showed angle that all subjects are great being caused in softness of joint and angular velocity was exposed that load enough Impact force and increase the speed of racket head as angular velocity decreases rapidly in Impact except subject S3. 4. All subjects of right elbow angle change showed similar form and was exposed that subject S2 sees form of impact stage serious bends from back swing and do not use force effectively in angular velocity. 5. Angle of right wrist appeared that the speed of shuttle cock is decelerated because fast bends of wrist is not formed shortly after Impact because all subject do not accomplish big angle shortly after back swing. Angular velocity can assume that the subject S1 and S4 are using and move fast strong snap shot offering angular velocity value of Impact stage sound (-). 6. While size of Impact stage knee angle accomplishes angle that is big both subject, hip joint angles sees small angle and is playing swing that do on upper body and arm without using strong waist force that is composition action with knee and hip joint.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.622-625
• /
• 2006

This study is a fundamental investigation for standardization of the heavy-weight floor impact measuring method by the impact ball. The distribution chrematistics of floor impact sound level and reverberation time in a receiving room of the testing building for floor impact sound were measured with variations of number and arrangement of the sound-absorbing materials. Total 8 cases were investigated. The distribution of the floor impact sound level($L_{i,\;Fmax}$) was measured at 30 points with same intervals. The absorption coefficient of the room is 0.10 in case of installation of 6 absorbing materials and 0.02 in case of non-installation. The distribution shape of the impact sound pressure level was similar to the result of the bang machine driving at the measured frequency range. However, the overall reduction of the impact sound level investigated in the 125 to 500 Hz shows that the sound absorption characteristics of the receiving room actually affects the result of the heavy-weight impact measurement.

• Land and Housing Review
• /
• v.15 no.3
• /
• pp.153-164
• /
• 2024

Structural health monitoring involves performance evaluation based on measurements for maintenance purposes. By back-calculating measured Frequency Response Function (FRF) data, the concept of effective mass was introduced and applied to the performance evaluation of structural members. An identification method was proposed that uses participation factors to estimate the dynamic parameters and the strength of concrete of structural members. The appropriateness of these methods for identifying dynamic parameters and concrete strength of structural members was validated through experimental results, proving their utility in non-destructive testing for concrete strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.141-142
• /
• 2009

This study discusses attempt of utilizing the natural frequencies to evaluate the effective stress of post-tensioned, external tendon in field. This type of structure has distinct advantage of good accessibility of tendon, which is considered to be one of essential elements in entire bridge. Six tendons in single span of PSC bridge were applied. They were excited using an impact hammer and corresponding vibrations were measured using multiple accelerometers. The stiff string model in idealized conditions was used to evaluate the effective stress in tendons.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.43-80
• /
• 2008

The purpose of this research is to analysis the swing of driver used by professional golfers during on-season. In order to collect on-season driver swings of research objects, which are three KPGA(Korean Professional Golfer Association) professional golfers, measurements were carried out right after the last game of a season. The analysis range was set to down-swing point while analysis was conducted to after-impact, release point. As a result, systematic process between leading segments of the previous precise kinematic analysis research seems to turn up the same. However, there were different results compared to the preceding research. All three testers expressed adduction of left hand which could not be described with forming cocking angle, in consequence, adduction of left hand does not have a big effect on formation of cocking. Moreover, chest movement right before the impact; which was emphasized in previous research, the direction was not opposite but the same with the ball.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.129-131
• /
• 2013

In this paper, a golf club head strikes the golf ball moves at a constant speed. Then the head of a golf club moves at a constant speed in the same direction. Then calculate the speed of the golf ball to hit a golf ball flying. It calculate the speed of the golf ball is different for each speed before hitting the golf ball.