• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.92-99
• /
• 2011

In Japan, bang machine has been considered to have problems about not only the impact force and frequency response which are different from the real impact sources such as children's jumping and running, but also damage in the wooden structure housing. Therefore, a new impactor for lower impact force to prevent demage in wooden structure housing was developed. The impact ball was adopted as the second standard impact source in JIS A 1418-2 and ISO 140-11. In the present study, floor impact sounds generated by impact ball with drop heights in four floors of mock-up building of Building Research Institute (BRI) similar to typical Japanese wooden structure housing were investigated and also compared to jumping sound. The results show that Impact ball sound dropped at 10 cm to 30 cm was most similar to jumping sound. And The impact sound levels at 250 and 500 Hz were more sensitive to drop height than other lower frequencies. The error that may occur from the difference of height of 10 cm up and down based on the standard drop height caused by the impact ball operated by human hands was approx. 1 dB or less only in its value of characteristic, but it must be carefully taken into Impact ball in the Korea Standard.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.129-138
• /
• 2008

The characteristics of beneficiating kaolin mineral by liberation (selective grinding) and air classification have been investigated, comparing the grinding rates of ball mill and impact mill. The ore was ground using a ball mill and a impact mill to evaluate the grindability of the two grinding methods based on the constant production amount of fine particles in size less than 325 mesh. Then, the fine product was further separated into two fractions using an air-classifier and each fraction was chemically analyzed to compare the beneficiation efficiency of the two grinding methods. The chemical grade of kaolin mineral decreased as increasing the grinding rate of both the mills. particularly in the case of ball mill because of overgrinding impurities such as quartz and feldspar. In the case of the ball milling, the fine fraction less than 325 mesh was air-classified at a cutting point of $43\;{\mu}m$. The production rate of the air-classified concentrate was found to be 66.2 wt%, removing 5.3% of $Fe_2O_3$ and 34.6% of CaO. Under the same conditions mentioned above with the impact mill, the production rate of the air-classified concentrate was 64.4 wt%, removing 34.2% of $Fe_2O_3$, 67.6% of CaO and 25.0% of $TiO_2$. Therefore, our results indicate that impact mill is superior to ball mill in terms of impurity removal.

• Fire Protection Technology
• /
• s.45
• /
• pp.28-36
• /
• 2008

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.207-214
• /
• 2002

The purpose of this study was to examine the putter head movement during the putting strokes. Highly skilled 5 golfers(less than 3 handicaps) and 5 novice golfers(having no golf experience) participated in this study. A target distance was 3 m. Movements of the putter head were recorded at 60 Hz with two video cameras(1/500 shutter speed). The results showed that the angle of the clubface of expert golfers was almost 1 degree, but the novice golfers were more than 6 degrees. Expert golfers moved their hands faster than the head movement, therefore the clubface was not opened during impact. However, the novice golfers moved their hands slower than the head movement, therefore the clubface was opened during impact. The ratio of input and output angles of total movement was 1:3-4, however, the ratio of input and output angles of impact zone was 1:2. The angle of normal vector of expert golfers was less than the angle of normal vector of novice golfers.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.197-206
• /
• 2002

The purpose of this study was to investigate the putter head movement during the putting strokes. Highly skilled 5 golfers(less than 3 handicaps) and 5 novice golfers(having no golf experience) participated in this study. A target distance was 3 m. Movements of the putter head were recorded at 60 Hz with two video cameras. The results showed that the novice golfers moved the club significantly longer than the expert golfers(p<.0001). Accoring to a movement time, novice golfers moved their club significantly faster than the expert golfers(p<0.001). Novice golfers could not control the club head effectively, and could not hit the ball correctly. Based on the impact zone movement, sweet spot of novice golfers moved faster(along the line of putt), higher(along the vertical line), and wider(along the side to side line) than that of expert golfers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.671-674
• /
• 2006

Heavy-weight impact sounds generated by impact ball were classified according to the frequency characteristics on the equal loudness contours. Sound quality metrics such as Zwicker's loudness, sharpness, roughness of each classified impact sound were also measured. Loudness spectrum has been regarded as an indication of the characteristics difference of each classified impact sound. The adjectives in Korean expressing the sound quality characteristics of floor impact sounds were also investigated by adoptability and similarity tests. The group of the adjectives was used to evaluate the sound quality of floor impact sound by semantic differential test method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.631-635
• /
• 2006

In this study, simplified methods on measurement and evaluation of heavy-wight impact sound was proposed due to provide easy quality control method to construction engineers. The simplified methods include using of rubber impact ball instead of bang machine, reduced number of measuring and impact positions which is prescribed as over 4 points, using of hand-held sound level meter as a frequency analyser and prediction equation for $L_{i.Fmax.AW}$, single number rating, using $L_{Amax}$, and $L_{Lmax}$ at each frequency band. The results showed that a method of boundary driving and boundary measuring is the most similar to the current rating method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.10 s.103
• /
• pp.1160-1168
• /
• 2005

Floor impact noise isolation performance of reinforced concrete floors was investigated through new measurement method using impact bail. Strong impact force in Bow frequency band below 63 Hz of bang machine is not similar to human impact source and causes some problem in evaluating heavy-weight Impact noise but heavy-weight impact noise measurement and evaluation using impact ball which is very similar to human impact is more reliable than bang machine. Correction value on the background noise and sensitivity of residents should be considered on the floor impact noise evaluation classes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.808-811
• /
• 2005

To use the impact ball as a new standard floor impact source, the objective and subjective properties of the impact bali were investigated. The results showed that not only the objective properties of the impact ball such as the Impact force exposure level, mechanical impedance but also the psychological parameters were more similar to those of the human impact than the bang machine. In addition, most of the subjects chose the impact bail sound as the most similar sound to the human impact sound in the auditory experiment.

• Management & Information Systems Review
• /
• v.34 no.2
• /
• pp.151-169
• /
• 2015

Social enterprises that are solving pressing global issues and providing services such as micro-finance, affordable housing, appropriate technology and education for the 'bottom of the pyramid' as well as cultural and community-related businesses that improve the 'quality of life' within a society are the target of impact investments. Among them, a capital financing is one of the most important factor in founding and fostering of social enterprise. However, the capital market for social enterprises in South Korea are not yet sufficiently developed. The Britain and U.S.A. attempted to solve the social problem by the introduction of the social innovation credit model, for example, social impact bonds(SIB), Big Society Capital, DBLIF, and ACCION International, which are considered as an innovative new financing instrument for social program. Instruments are being attempted for the first time in Britain and America. This study have two purposes. The first purpose is abstracting the institutional mechanism for introduction of impact investment such as SIB and DBLIF case in Britain and U.S.A.. Second, analyzing type and mix of policy instrument on impact investment from the perspective of policy instrument.