• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.39-48
• /
• 1994

An equivalent homogeneous 3-D linear composite analysis and accomponying finite element program is presented for elastomeric bearings. This study is limited to the 3-D layered system with linear, elastic, isoparametric small deformation. And we used method of multiscale to model the 3-dimensional configurations and overall response of the layered elastomeric bearings with global and local coordinates. The primary dependent variables for the theory have been selected that require only $C_o$ continuity of the finite element analysis. As a result, it is very simple and computationally economical. The presented theory can also be applied easily to the analysis of nonlinear behavior of layered systems. And those of past are not applicable to nonlinear analysis, because it uses superposition theory. Numerical examples are presented to verify the theory and to illustrate potential applications of the analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.29-38
• /
• 1994

Linear composite theory as well as a finite element program is developed for axisymmetric elastomeric bearings. This study is limited to axisymmetrically loaded horizontal layered systems with linear, elastic, small' deformation conditions. A multiscale method is used in the development of the composite theory which enables us to model inhomogeneous layered composites as equivalent homogeneous, orthotropic material. Only continuity of the prime variables is required for the finite element analysis, allowing the use of simple $C_o$ elements whereas rather complicated theories presented in the past need more requirements. Four node isoparametric elements are used in the study. The developed theory of this paper is limited to linear conditions, however, the analysis can be extended to nonlinear behavior of flexible material in elastomeric bearing by using multiscale method presented here. Two numerical examples are examined and compared to the results of discrete and previously obtained composite analysis to verify the theory.

• Current Research on Agriculture and Life Sciences
• /
• v.18
• /
• pp.43-51
• /
• 2000

Eleven inbred lines of silkworm, Bombyx mori L. were exposed to two main different temperature (23C and 25C) during the larval period in order to elucidate the effect of the temperature differences on their main characters under the, prevailing in Egyptial agro-climactic conditions. The results show that the temperature differences did not affect significantly the pupation ratio and cocoon shell ratio. However, they affected their larval duration to become shorter with the high temperature treatment ($27^{\circ}C$) and their cocoon shell weight and cocoon yield per box of silkworm eggs to be higher in the lower temperature($23^{\circ}C$). It was recommended that some inbred lines should be bred at the 23C throughout the whole larval period, particularly in being reared with high nutritional leaves in order to maximize the hybridization of cocoon yields.

• The Journal of Society for e-Business Studies
• /
• v.20 no.4
• /
• pp.127-150
• /
• 2015

Since 9/11 attack, internet has become a major space for terrorist activities and also emerged as the most important spot of lone wolf terrorists for acquiring tools and radicalization. The accident of student Kim's defection to IS (Islamic state) in January 2015 told us that Korea is not any more "terrorism clearance area" and leaded us to look closely into the possibility of lone wolf terrorist. In this paper, I developed a "lone wolf cyber evolution model" using various materials collected by preceding papers and interviewing investigators and terrorism experts in Korea. I analyze Kim's radicalization process using this model. And I picked and closely looked over some facilitating factors of lone wolf such as multi-cultural socialization, increase of international migrants, expansion alienation hierarchy and ideological conflicts deepening and predicted the possibility of lone wolf. Finally, this paper presents some effective policy measurements against lone wolf terrorism in Korea.

• The Journal of the Korea Contents Association
• /
• v.15 no.7
• /
• pp.30-42
• /
• 2015

In this paper, we propose a new skyline query processing scheme to enhance accuracy of query processing and communication cost in mobile P2P environments. The proposed scheme consists of three stages such as the pre-skyline processing, the query transmission range extension policy, and the continuous skyline query processing. In the pre-skyline processing, a peer selects the candidate filtering objects who have the potential to be selected. By doing so, the proposed scheme reduces the filtering cost when processing the query. In the query transmission range extension policy, we have improved the accuracy by extending the query transmission range. In addition, it can handle continuous skyline query by performing the monitoring after the first skyline query processing. In order to show the superiority of the proposed method, we compare it with the existing schemes through performance evaluation. As a result, it was shown that the proposed scheme outperforms the existing schemes.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.430-436
• /
• 2009

Deactivated three-way catalysts which had been exposed to gasoline engine exhaust for a long time were remanufactured by ultra sonic cleaning with distilled water, sulfuric acid solution and impregnation with precious metals (Pt, Pd, Rh). The catalytic properties as well as conversion reactivity of CO, THC and NOx about fresh, aged and remanufactured catalysts were examined. Most of the pollutants deposited on the aged three-way catalysts were removed in the remanufacturing process of those catalysts. At the same time a little amount of precious metals like Pt and Pd were removed in the remanufacturing process. Under the experimental condition used in this study, in the case of the remanufactured catalysts with impregnation of precious metals, the catalytic activities were recovered to almost the same level, or higher level of that of the fresh catalyst.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.747-753
• /
• 2018

In the license-plate recognition systems for automobile black Image, the license-plate image frequently has a shadow due to outdoor environments which are frequently changing. Such a shadow makes unpredictable errors in the segmentation process of individual characters and numbers of the license plate image, and reduces the overall recognition rate. In this paper, to improve the recognition rate in these circumstance, a license-plate image binarization algorithm is proposed removing the shadow effectively. The propose algorithm splits the license-plate image into the regions with the shadow and without. To find out the boundary of two regions, the algorithm estimates the curve for shadow boundary using the least-squares method. The simulation is performed for the license-plate image having its shadow, and the results show much higher recognition rate than the previous algorithm.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.344-353
• /
• 2012

In this paper, we propose a super-resolution algorithm using discrete wavelet transform. In general super-resolution algorithms for single-image, probability based operations have been used for searching high-frequency components. Consequently, the complexity of the algorithm causes the increase of processing time. In the proposed algorithm, we use discrete wavelet transform to find high-frequency sub-bands. We perform inverse discrete wavelet transform using input image and high-frequency sub-bands of the same resolution as the input image which are obtained by performing discrete wavelet transform without down-sampling and then we obtain image with high-resolution. In the proposed algorithm, we use the down-sampled version of the original image ($512{\times}512$) as a test image ($256{\times}256$) to compare the performance of algorithms. Through experimental results, we confirm the improved efficiency of the proposed algorithm comparing with conventional interpolation algorithms and also decreased processing time comparing the probability based operations.

• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.398-405
• /
• 2018

In the HCI, hand gesture recognition is attracting attention as a method for interaction and information exchange between users and devices along with the development of IT devices. In hand gesture recognition through image processing, palm region detection is a key process contributing to improvement of processing speed and recognition rate. In this paper, we propose a new method for image segmentation between the hand and wrist for palm area detection. The anatomical characteristics of the hand are used to calculate the distance between the iliac bones of the thumb and little finger, which have the widest width, by the horizontal projection histogram of the hand image, and then the palm area is detected by drawing a circle having the width as the diameter. In order to verify the superiority of this method, multiple stage template matching is used to compare and evaluate recognition performance against the four conventional methods for 10 hand gestures. Note that the literatures to offer palm area detection performance evaluation are few although there are many studies on hand gesture recognition.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.1-14
• /
• 2009

A currently domestic governmental R&D business is early to 100. And this is each managed individually in 15 professional organizations of research and management by characteristics of a business. For this Reason, A redundant investment issue regarding national R&D occurs, and an issue regarding efficiency of R&D investment by insufficiency of systematic R&D research project and result management is continuously raised. Ministry of Education Science and Technology establishing National Science & Technology Information Service(NTIS) in order to solve these issues. NTIS is the national R&D Portal System which can support efficiency of research and development to result utilization in planning of national research and development. In this paper We consider integrated DB constructions and Information Linking of R&D Participants/Projects/Results information in a NTIS system for data quality Improvement. and then We analyze the cause of the data quality problem, and we propose the improvement plan for data quality elevation of NTIS system.