• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2102-2104
• /
• 2007

본 연구에서는 수치모의을 통하여 최대범람구역을 설정하고, 지역주민들의 실제 피난상황을 모의하여 실제 지진해일이 발생했을 때 인명피해를 예측하는 기법을 개발하였다. 1983년 동해 중부 지진해일의 수치모형실험을 통하여 최대범람구역 및 범람시간을 설정하였고, 임원항 지역을 가상공간에서 재현하여 지역주민의 피난상황을 모의하였다. 최종 피난 지역은 3개로 설정하였으며, 각각 다른 지역을 설정하여 반복해서 실험하여 인명피해를 예측하고 수치모형실험 결과를 토대로 가장 적합한 피난 지역을 선택하였다. 인명 및 재산피해를 최소화하는 방재대책을 수립하는데 본 연구의 결과를 활용할 수 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.496-505
• /
• 2020

In the previous research, the effectiveness of resonator was confirmed through the numerical analysis on two cases with the use of existing resonator at the Mukho and Imwon ports located in the eastern coast of South Korea by discussing the reduction rates of 1983 Central East Sea tsunami, and 1993 Hokkaido Southwest off tsunami, respectively. In this study, the reduction rates of tsunami height with three different resonators, Type I, II-1, and II-2, at the Samcheok port were examined respectively through the numerical analysis using COMCOT model under the same condition as the previous study. It was discussed the spatial distribution of maximum height of tsunami, change of water level, and effectiveness of resonator with the presence of new types of resonator, and change of their sizes. As a result, the effectiveness of resonator was verified through the application of new types of resonator reducing about maximum 40% of tsunami height. In order to design the optimal resonator for the variety of site condition, it is necessary to research about the various cases applying different shape, arrangement, and size of resonator as further study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.2
• /
• pp.161-169
• /
• 1999

이방성체의 평면내 직선균열에 대한 균열선단부근의 응력과 변위의 분포는 어떠한 균열체의 형상 및 하중조건에 대해서도 응력확대계수라는 하나의 매개변수로서 나타낼 수 있다고 하는 것이 파괴역학에서 보편화되어 있다. 그러나 많은 경우에 있어서 급수전개식의 이어지는 항은 정량적으로 중요하다. 따라서 본 연구에서는 이러한 항을 유도하고 이것이 균열진전방향에 미치는 영향에 대하여 검초하였다. 이를 위하여 단축하중을 받는 직방성균열체의 해석을 수행하며 재료는 균질이방성체라고 가정하였다. 급수전개식에서 2차항의 영향을 고려하기 위하여 균열선단에서의 응력의 분포를 재해석하였으며, 2차항의 사용은 정확한 균열진전방향의 결정을 위해서 매우 중요함을 보였다. 초기균열진전각도의 결정을 위해서 수직응력비이론을 적용하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.59-65
• /
• 2004

The stress intensity factors have been widely used in numerical studies of crack growth direction. However in many cases, omissive terms of the series expansion are quantitatively significant, so we consider the computation of such terms. For this purpose, we used the finite element method with isoparametric quadratic quarter-point elements. For examples, infinite square plate with a slant crack subjected to a uniaxial load is analyzed. The numerical analysis were performed for the wide range of crack tip element lengths and inclined angles. The numerical results obtained are compared with the theoretical solutions. Also they were accurate and efficient.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.287-294
• /
• 2010

In this study, a method to construct tsunami inundation map corresponding to the earthquake location and magnitude was proposed for tsunami real-time quantitative response. This proposed procedure can be introduced as in the followings: Potential tsunami source locations expected to cause damage in an interested area was identified. And numerical simulations were performed for various earthquake magnitudes. Based on numerical simulation results, inundation maps were constructed according to each source location and magnitude of tsunami generating earthquake. In this study, inundation maps for Imwon harbor were constructed for the 11 source locations and 7 earthquake magnitudes on a trial basis.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.234-239
• /
• 2001

The stress intensity factors have been widely used in numerical studies of crack growth direction. However in many cases, omissive terms of the series expansion are quantitatively significant, so we consider the computation of such terms. For this purpose, we used the finite element method with isometric quadratic quarter-point elements. For examples, infinite square plate with a slant crack subjected to a uniaxial load is analyzed. The numerical analysis were performed for the wide range of crack tip element lengths and inclined angles. The numerical results obtained are compared with the theoretical solutions. Also they were accurate and efficient.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.194-202
• /
• 2008

In general, forecast tsunami heights announced for tsunami warning are computed by using a linear tsunami model with coarse grids which leads the underestimation of inundation area. Thus, an accurate tsunami inundation map corresponding the forecast tsunami height is needed for an emergency evacuation plan. A practical way to construct a relatively accurate tsunami inundation map was proposed in this study for the quantitative forecast of inundation area. This procedure can be introduced as in the followings: The fault dislocations of potential tsunami sources generating a specific tsunami height near an interested area are found by using a linear tsunami model. Based on these fault dislocations, maximum inundation envelops of the interested area are computed and illustrated by using nonlinear inundation numerical model. In this study, the tsunami inundation map for Imwon area was constructed according to 11 potential tsunami sources, and the validity of this process was examined.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.127-133
• /
• 2010

In the ocean area surrounding the Korean Peninsula, the undersea earthquakes have occurred frequently during last decades. The eastern coast of the Korean Peninsula is very vulnerable to tsunami attacks which occur along the Western Coast of Japan. In special, the middle areas of the eastern coast of Korean Peninsula have been damaged due to the Central East Sea Tsunami occurred in 1983. Thus, tsunami hazard mitigation becomes an important issue at eastern coastal communities. The countermeasures against unexpected tsunami attacks are not sufficient because the government policy generally focused on not preventing but recovering. In this paper, a hazard map based on the field survey and tsunami evacuation simulation is developed to mitigate tsunami damage at Imwon port, which was severely damaged during the 1983 Central East Sea Tsunami.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.207-219
• /
• 1993

Tsunamis along the east coast of Korea accompanying the 1983 East Sea central region earthquake is hindcasted with numerical models for tsunami propagation and inundation. Both linear and nonlinear models were used to compute propagation and elevation of tsunami waves on the coastal area of Korea. For the mesh refinement, grid system was divided into two sub-regions in Korean coastal area with final 10m grid resolution at interior area where serious inundation was observed. Calculated tsunami height distribution showed a general agreement with coastal observation. With interior detailed mesh system at mid-east coast region, the inundatin at the port of Imwon were qualitatively well reproduced by inundation and runup model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.27-36
• /
• 2012

The mobile harbor is a new concept system to solve the problems of a port. These problems are that container ships cannot be anchored at the dock because they have become larger or the waiting times of anchoring the ships are increased due to heavy container traffic. A new system is designed to carry out the loading and unloading of containers between the mobile harbor and the container ship using the mobile harbor crane at sea. The crane plays an important role when transferring the containers. In this research, various types of the mobile harbor crane are proposed and structural optimization for each type of the crane is carried out. The loading conditions consider the rolling and pitching conditions of the unstable sea state and the wind force are considered. The constraints are mainly the regulations made by the Korean Register of Shipping. The structure of the crane is optimized to minimize the mass while various constraints are satisfied.