• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.32.1-32.1
• /
• 2011

39 K의 임계온도를 갖는 $MgB_2$ 초전도체를 이용한 전력에너지와 MRI 의료 기기로의 응용 가능성이 높아지고 있다. $MgB_2$ 초전도체 제조에 있어서 마그네슘과 반응성이 좋은 비정질의 붕소 원료 분말 가격이 비싼 반면 상대적으로 경제적인 결정질 분말의 기계적 밀링 공정을 이용하여 비정질화와 나노 입자로의 크기 감소 효과를 얻을 수 있다. 또한 탄소를 이용한 붕소 치환으로부터 고 자기장하에서 초전도 임계 성질을 향상시키고자 유, 무기물 형태의 여러 가지 탄소 소스를 개발하는 연구가 진행되어 왔다. 본 연구에서는 저가의 95~97% 순도, 약 1 ${\mu}m$ 이하 크기를 갖는 준결정상의 붕소 분말을 이용하여 기계적 밀링에 따른 붕소 분말의 비정질화 및 입자 나노화, $MgB_2$ 반응성 향상, $MgB_2$ 결정립 크기 감소 및 결정립계 피닝 증가에 의한 초전도 임계 물성 향상에 대하여 알아보았다. 또한 여러 시간 동안 밀링된 각 붕소 분말에 액체 글리세린을 이용한 탄소 도핑 전처리를 통하여 밀링 시간의 최적화를 알아보았고 이로부터 제조된 $MgB_2$ 초전도 벌크의 경우 적절한 임계온도 감소, 격자 왜곡 결함과 높은 결정립계 밀도 등에 의한 플럭스 피닝 향상으로 $MgB_2$ 초전도체의 임계전류밀도 및 비가역자기장이 증가함을 알 수 있었다. 즉, 경제성 있는 저급의 준결정상을 갖는 붕소 원료 분말의 입자 비정질 나노화 및 탄소 도핑 전처리를 통하여 $MgB_2$ 초전도 임계 물성을 향상시킬 수 있었다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.137-151
• /
• 2017

The space between urban buildings becomes a waterway during rain events and requires a boundary condition in numerical calculations on grids to separate overland storm flows from building areas. Minimization of the building data distortion as a boundary condition is a necessary step for generating accurate calculation results. A building generalization is used to reduce the distortion of building shapes and areas during a raster conversion. The objective of this study was to provide the appropriate threshold value for building generalization and grid size in a numerical calculation. The impact of building generation on the connectivity of urban storm waterways were analyzed for a general residential area. The building generalization threshold value and the grid size for numerical analysis were selected as the independent variables for analysis, and the number and area of sinks were used as the dependent variables. The values for the building generalization threshold and grid size were taken as the optimal values to maximize the building area and minimize the sink area. With a 3 m generalization threshold, sets of $5{\times}5m$ to $10{\times}10m$ caused 5% less building area and 94.4% more sink area compared to the original values. Two sites representing general residential area types 2 and 3 were used to verify building generalization thresholds for improving the connectivity of storm waterways. It is clear that the recommended values are effective for reducing the distortion in both building and sink areas.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.39-45
• /
• 2006

Structural health monitoring has been conducted by non-destructive evaluation method when a turbine rotor system of an aircraft engine has cracks. Local stiffness of a turbine rotor system is degraded and critical speed is changed due to the presence of cracks in rotor. Critical speed which is affected by location and depth of crack, is obtained using compliance matrix of cracked rotor. The database of the obtained critical speed is used to evaluate structural health monitoring of a rotor system of a gas turbine engine.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.605-608
• /
• 2007

The denoising for image restoration based on the Wavelet Packet with absolute average threshold is presented. The Existing method is used standard deviation estimated results in increasing the noise and threshold, and damaging an image quality. In addition that is decreased image restoration PSNR by using the same threshold in spite of changing image because of installing a threshold in proportion of noise size. In contrast, the absolute average threshold with wavelet packet is adapted by changing image to set up threshold by statistic quantity of resolved image and is avoided an extreme impart. The results on the experiment has improved 10% and 5% over than the denoising based on simple wavelet transform and wavelet packet respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1122-1128
• /
• 2007

The denoising for image restoration based on the Wavelet Packet Transform with AA(Absolute Average) making-threshold is presented. The wavelet packet transform leads to be better in the part of high frequency than wavelet transform to eliminate noise. And the existing threshold determination is used standard deviation estimated results in increasing the noise and threshold, and damaging an image quality. In addition that is decreased image restoration PSNR by using the same threshold in spite of changing image because of installing a threshold in proportion of noise size. In contrast the AA thresholding method with wavelet packet is adapted by changing image to set up threshold by statistic quantity of resolved image and is avoided an extreme impact. The results on the experiment has improved 10% and 5% over than the denoising based on simple wavelet transform and wavelet packet respectively.

• Journal of the KSME
• /
• v.32 no.4
• /
• pp.379-390
• /
• 1992

1) 수치해석 결과, 운용압력으로 인한 엘보우에서의 응력은 재료의 강도에 비해 파손을 발생시 키기에는 상대적으로 작았고, 오히려 온도차에 의한 열응력이 내압에 의한 응력보다 매우 컸다. 즉 축방향 열응력은 운용압력에 의한 것보다 두배 더 크게 나타났다. 2) 파면의 육안 검사 결과, 급격한 파손은 취성 벽개 파괴로 인한 것으로 추측된다. 3) 시험 결과 균열이 시작하여 임계 크기로 진전한 부위인 K사에서 만든 엘보우는 S사에서 만든 것보다 훨씬 더 취성적임을 보여 주었다. 4) 임계 균열크기를 계산하기 위해 파괴 역학적 해석을 사용하는데 그 결과는 파손된 면에서 관 찰한 실제 균열 크기와 상당히 일치하였다. 5) 유사한 사고를 방지하기 위하여, 플랜트를 가동하는 동안 계속적으로 파괴 역학적 개념을 적 용해야 한다. 또한 운용전과 운용중에 잘 준비된 비파괴검사법을 사용하여야 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2828-2835
• /
• 1996

In this paper we propose a new shaping algorithm which can control the shaping delay and the output buffer size based on the leaky bucket counter with a threshold value. This paper assumes that input traffic of the proposed shaping algorithm is the worst case traffic tolerated by the continuous leaky bucket algorithm and claracterizes traffic patterns that can depart from our shaping algorithm. We also compare shaping delay and output buffer size of the proposed algorithm with the existing shaping algorithm without a threshold value. Our results show that the proposed shaping algorithm can easily manage the shaping delay and output buffer size than any other mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.561-564
• /
• 2008

본 논문에서 제안하는 버블(Bubble) 크기 보정 기법은 영상의 히스토그램의 모드법에 의한 최적의 임계값을 결정함으로써 버블의 크기를 정확하게 측정하는 기술이다. 제안하는 기술은 Ladle 탕면을 관측할 수 있는 CCD 카메라에 의한 측정시스템을 구현하며, 관측된 영상으로부터 방면거리, 버블크기 등을 알고리듬에 의해 구하여 탕의 용강 성분을 제어하기 위한 데이터를 제공하기 위하여 전송하게 된다. 본 논문에서 제안한 기법을 적용하여 실험한 결과 기존의 알고리듬에 의한 단순한 계산 및 히스토그램의 중간치 계산에 의한 결과와 비교하여 0.9%의 오차범위에서 개선된 버블크기를 얻을 수 있었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.3
• /
• pp.183-195
• /
• 2012

This study conducted comparative analysis to estimate critical velocity in tunnel fire under variation of grid number and the location and size of the fire source using three-dimensional computational fluid dynamics. In the target tunnel, by one-dimensional way, the calculated critical velocity in the tunnel, 2.22 m/s was estimated, if appling hydraulic diameter, instead of the tunnel height. According to six numerical analysis, each grid number has different position, temperature, and CO concentration of back-layering. In the case of the subject, the case 1 with 0.84 million grid was found to be the most ideal. According to the location and size of the fire source, after three cases for three-dimensional numerical analysis was performed, it is resulted that the location and size of the fire source affect the critical velocity, because air velocity distribution, temperature distribution and CO concentration distribution showed different each case. This is due to the difference of heat exchange area and locations. Therefore, it is necessary to decide appropriate grid number, and the location and size of the fire source for processing techniques through comparison with actual experiment results and three-dimensional analysis.

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.140-144
• /
• 1997

The effects of the particle size of precursor powder on the microstructure and Jc of Ag-sheathed Ri-2223 tapes were investigated. The calcined powder with overall composition of $Bi_{1-89}Pb_{0-41}Sr_{2-01}Ca_{2-23}Cu_{3-03}O_{y}$ was milled for various times using planetary ball mill. The transport property of the tapes were found to depend strongly on the particle size of the precursor powder Enhanced reactivity of the milled powder facilitated the formation of 2223 phase and resulted in an increase of Jc. Excessive milling, however, led to the amorphisation of the powder and degraded the electrical property of the tapes.