• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.279-285
• /
• 2023

In order to predict the mechanical properties of ductile cast iron heat treated in an intercritical temperature range, samples machined from cast iron with a tensile strength of 450 MPa were heat-treated at various intercritical temperatures and air-cooled, after which a microstructural analysis and Brinell hardness test were conducted. As the heat treatment temperature was increased in the intercritical temperature range, the ferrite fraction in the ductile cast iron decreased and the pearlite fraction increased, whereas the nodularity and nodule count did not change considerably from the corresponding values in the as-cast condition. The Brinell hardness values of the heat-treated ductile cast iron increased gradually as the heat treatment temperature was increased. Based on the measured alloy composition, the fraction of each stable phase and the hardness model from the literature, the hardness of the ductile cast iron heat treated in the intercritical temperature range was calculated, showing values very similar to the measured hardness data. In order to check whether it is possible to predict the hardness of heat-treated ductile cast iron by using the phase fraction obtained from thermodynamic calculations, the volumes of graphite, ferrite, and austenite in the alloy were calculated for each temperature condition. Those volume fractions were then converted into areas of each phase for hardness prediction of the heat-treated ductile cast iron. The hardness values of the cast iron samples based on thermodynamic calculations and on the hardness prediction model were similar within an error range up to 27 compared to the measured hardness data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.174-177
• /
• 2016

Wireless network-on-chip (WNoC) can alleviate critical path problem of existing typical NoCs by integrating radio-frequency module on router. In this paper, core-connection-aware genetic algorithm-based core and WIR mapping methodology at small world WNoC is presented. The methodology could optimize the critical path between cores with heavy communication. The 33% of average latency improvement is achieved compared to random mapping methodology.

• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.245-263
• /
• 2014

This study tries to investigate the changes of mortality regarding heat waves which are usually considered as one of the most direct impacts of climate change. Based on 17 years data period (1994-2010), each city's threshold temperature and minimum mortality temperature are recognized. According to the results, minimum mortality temperature varies from 23 to $25^{\circ}C$, showing minimum temperature corresponding to $23^{\circ}C$ in Gangwondo and maximum temperature corresponding to $25.4^{\circ}C$ in Jeollabukdo and Major 7 city group. In case of threshold temperature, it ranges from 27 to $30^{\circ}C$. The cities having higher threshold temperatures tend to have large populations and vice versa. In addition, the cities having negative demographic vulnerability relatively have lower temperatures, representing correlation -0.44(p=0.06). The socio-economic-environmental vulnerability shows negative correlation with minimum mortality temperature(r=-0.36, p=0.032) and threshold temperature(r=-0.29, p=0.081). This paper represents that the number of mortality could increase rapidly and show large spatial differences in the number of mortality depending on various factors including natural, social, and economic factors of each region.

• Journal of the Korean Chemical Society
• /
• v.58 no.6
• /
• pp.528-534
• /
• 2014

In some binary solution, closed miscibility loop of temperature-composition phase diagram occurs where both an upper critical solution temperature and a lower critical solution temperature exist. It is known that this phenomena occurs if specific interaction between molecules exists. There are several ways describing the specific interaction. In this work it is assumed that the total number of specific interactions is distributed according to binomial distribution. In this case, exact mathematical conditions for closed miscibility loop phase behavior are derived when the specific interaction is applied to regular solution theory, quasichemical theory and Flory-Huggins lattice theory. And we investigated the effect of parameters on the phase diagram. The phase diagram of water-nicotine is calculated and compared with experimental data.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.233-236
• /
• 2007

In this paper, thermal sensitivity of the solid fuel grain in the hybrid rocket motor was investigated. When the heat from the non-reacting hot flow passing the grain ports is transferred to the solid fuel grain, the temperature fields in the solid fuel was numerically analyzed. These numerical analyzes were performed under the different nine port radii, and the critical distance between the ports in which the temperature in the solid fuel is sensibly responding was determined. Thus, the critical distance between the ports would be the important consideration for the design of the fuel grain because the high temperature in the fuel can bring the structural problems.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.680-689
• /
• 1996

SrCaCuO와 BiPbCuO 화합물로 이루어진 이중층시료가 만들어 졌으며, 소결과정에서 나타나는 확산과 입자간의 상호작용으로 108K의 임계온도를 나타내었다. 이 시료는 820.deg. C에서 0-210 시간동안 소결되었다. 초전도체의 생성, 성장메카니즘과 임계온도의 관계가 연구되었으며, 최적조건은 820.deg. C에서 210시간 소결하고 SrCaCuO와 BiPbCuO의 도포비가 1:0.6인 시편에서 나타났다. 또한 이중층시료에서 가장 좋은 조성비는 S $r_{2}$C $a_{2}$C $u_{2}$ $O_{x}$와 B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$ 이었다.다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.386-393
• /
• 1984

This study was carried out to identify the ecological characters easily changeable with the conditions of temperature and day-length and to ascertain the managable means which can optimize the barley plants to secure the maximae yield and early heading under controlled condition. Yield and yield components were greatly varied with temperature. Especially, effective tiller formation and grain filling of sub-tillers were more favorably affected by thermal treatment than those of main tiller. In thermic response, 'Kangbori' was less susceptible than others, while 'Sacheon #6' showed particular susceptability. The varietal differences of photoperiodic response were recognized on all investigated traits and their degree of response were similar to those with temperature. Among varieties, 'Kangbori' was comparably sensitive on several characters while 'Sacheon #6' displaying low light-sensitivity. The turning point at which heading might be radically stimulated was estimated as about 10.5 hour day-length in 3 tested varieties and above 18 hours of irradiance was considered ineffective for more rapid heading. The condition under which barley varieties may obtain maximal yield and resonably early heading was 15$^{\circ}C$ in temperature and 12 to 15 hours of day-length, regardless of varieties. of day-length, regardless of varieties.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.337-342
• /
• 1998

임계온도가 액체질소의 비등점(77K)보다 높은 산화물 고온 초전도체가 발견된 이후 초전도체를 여러분야에 응용하고자 하는 연구가 있어왔다. 이러한 연구중 초전도체의 자기부상특성을 이용한 마그네틱 베어링에 관한 연구가 시작되었다. 특히 최근에 임계전류밀도가 높은 덩어리형 고온 초전도체가 개발되어, 큰 부하지지력을 갖고 마찰계수가 작은 초전도 마그네틱 베어링이 가능하게 되었다. 고온 초전도체를 사용한 반발식 수동형 마그네틱 베어링은 마이스너 효과(Meissner effect)뿐 아니라 자속고정효과(Flux pinning effect)에 의해 자체적으로 외란에 대한 위치안정성을 가지며, 히스테리시스 손실에 의한 에너지 소산을 통해 외란에 대해 강한 감쇠능력을 가진다는 장점을 가지고 있으며, 대중량을 지지할 수 있다. 이러한 초전도체의 특성에 관한 정량적 수치해석은 초전도 베어링의 설계에 필수적이나 아직 국내에서는 그러한 시도가 없었다. 이러한 여건을 고려하여 본 연구에서는 Bulk형 초전도체와 자석간의 부상력 변화를 축대칭 모델로 수치해석하여 기존의 실험들과 정량적인 비교를 하여 수치해석 코드의 신뢰성을 확보하고 이를 기반으로 다양한 상황을 예측할 수 있음을 보이고자 한다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.167-172
• /
• 1997

초전도체를 기계요소중 하나인 베어링에 응용하기 위한 연구는 임계온도가 액체질소의 비등점(77K)보다 높은 산화물 고온 초전도체가 발견된 이후 시작되었으며, 특히 최근에는 $10^4A/cm^2$이상의 임계전류밀도를 갖는 덩어리형 고온 초전도체가 용융공정을 통해 개발되어, 큰 부하지지력을 갖고 10$^{-8}$ 이하의 마찰계수를 갖는 초전도 마그네틱 베어링으로서 플라이휠 같은 에너지 저장장치에 적용시키는 연구가 국내외적으로 진행되고 있다. 고온 초전도체를 사용한 반발식 수동형 미그네틱 베어링은 Meissner effect뿐 아니라 Fluxpinning effect에 의해 자체적으로 외란에 대한 위치안정성을 가지며, 히스테리시스 손실에 의한 에너지 소산을 통해 외란에 대해 강한 감쇠능력을 가진다는 장점을 가지고 있으며, 대중량을 지지할 수 있다. 이러한 초전도체의 특성에 관한 정량적 수치해석은 초전도 베어링의 설계에 필수적이나 아직 국내에서는 그러한 시도가 없었다. 이러한 여건을 고려하여 본 연구에서는 초전도체와 자석간의 부상력 변화를 2차원 Slab모델로 수치해석하여 히스테리시스라는 주요한 특성을 고찰하고자 한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.163-168
• /
• 2010

This paper presents the practical implementation of an over-temperature protection system for power semiconductor devices. In the proposed system, temperature variation is provided with just using $R_{ds(on)}$ characteristics of power MOSFET, while extra device such as a temperature sensor or an over-temperature detection transistor is needed to monitor the temperature in the conventional method. The proposed protection technique is experimentally tested on IRF840 power MOSFET. The PIC microcontroller PIC16F877A is used for the implementation of the proposed protection algorithm. The built-in 10-bit A/D converter is utilized for detecting voltage variance between a drain and a source of IRF840. The induced temperature-resistance relationship based on the measured drain-source voltage, supplies a gate signal to the power MOSFET. If detected temperature's voltage exceeds any a protection temperature's voltage, the microcontroller removes the trigger signal from the power MOSFET. These test results showed satisfactory performances of the proposed protection system in term of accuracy within 1.5%.