• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.377-377
• /
• 2017

다목적댐은 비어있는 저수지 용량을 활용, 상류에서 유입되는 홍수를 저류하여 하류의 피해를 경감시키고, 저류된 저수량을 활용하여 갈수시 생 공 유지용수 등을 목적에 맞게 하류로의 공급에 주요 목적이 있다. 이를 위해 댐 계획에는 상류에서 유입되는 목표 빈도 계획홍수량을 산정하고, 이에 따른 여수로의 계획방류량 등이 포함된 홍수 조절 방안이 수립된다. 다목적댐은 그 중요도 때문에 많은 사회적 재화(財貨)가 투입되어 하천에서 가장 높은 빈도인 200년 빈도 홍수량에 대비하도록 설계되어 있다. 그러나 대부분의 댐 하류 하천에서는 긴 연장에 따른 투자비용 등의 한계로 상류 댐에 미치지 못하는 100년 빈도 이하로 설정되어있다. 이런 상 하류의 홍수계획간 괴리로 댐의 계획 방류량 수준의 홍수 조절시에는 하류 하천에 재난상황으로 발생할 우려가 있다. 기상예보의 고도화로 단기 예보의 정밀도가 높아져 단기간 댐 운영에는 효과적으로 활용되고 있다. 하지만 5일 이후를 예보하는 중 장기예보는 아직까지도 불확실성이 높은 실정이다. 여기에 기후변화 등 기상의 불확실성을 고려하여 홍수기 초 장마와 태풍 등의 영향에 대비하기 위해 무작정 댐을 저(低)수위로 운영하면 이후 여름 가뭄에 취약해 지고, 반대로 저수량 확보의 고(高)수위 운영을 할 경우 연이은 태풍 등 홍수상황에 취약해 지게 된다. 최근 '14~'15년도 낙동강 수계에 여름가뭄으로 안동 임하댐이 가뭄단계에 돌입하는 등 홍수기초 적정 저수량의 확보는 안정적 수자원시설 운영에 중요성이 커지고 있다. 본 연구에서는 이러한 불확실한 기상상황에 대비하고 댐의 이치수 목적 달성을 위해, 홍수기초 가능한 저수량을 확보하되 계획홍수량이 들어와도 하류피해는 경감시킬 수 있는 저수지 수위를 찾고자하였다. 이를 위해 낙동강 수계 9개 다목적댐(안동, 임하, 성덕, 보현산, 군위, 김천부항, 합천, 남강, 밀양댐)을 대상으로 댐 설계 및 직하류 하천 상황을 고려한 "홍수기초 댐 저수량 확보 수위 검토"를 실시하였다. 댐 직하류 하천의 홍수대비 상황 및 홍수조절시 제약사항 등을 조사해 주요지점(Critical Point)을 선정하고 그 지점의 홍수량을 파악한다. 이어서 저류함수 모형을 활용하여 댐별 저수지 모의 운영을 실시하였다. 대상 댐 저수지에 계획홍수량을 유입시키고 수위를 점차 조정하면서 하류 지점의 홍수량 내의 규모로 방류를 하는 저수지 모의 운영을 실시하였다. 이때 저수지의 계획홍수위를 초과하지 않는 등 안정적 홍수조절이 가능한 특정 수위를 찾아 하류 하천 환경을 고려한 댐 운영 수위로 선정하였다. 최근 홍수기총에는 강수량이 계속 줄어들고 홍수기 이후 더 많은 강수가 내리는 등 기후변화로 댐 운영은 날로 어려워지고 있다. 본 연구의 분석 결과는 홍수기초 가뭄 및 장마 또는 태풍 등에 대비하여 댐 운영의 이 치수 두 가지 목적을 달성하는데 참고가 될 수 있을 것이다.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.228-235
• /
• 2012

This study was carried out to investigate the effect of irrigation methods for reducing a drainage on the growth and yield in rockwool (Grodan co.) and cocopeat (chip : dust = 50 : 50 included fiber) culture. The nutrient solution was irrigated by $100J{\cdot}cm^{-2}$-100 mL, $50J{\cdot}cm^{-2}$-45 mL, $50J{\cdot}cm^{-2}$-40 mL, $50J{\cdot}cm^{-2}$-35 mL ($100{\sim}50J{\cdot}cm^{-2}$-100~35 mL, Nutrient solution 100~35 mL was irrigated per plant when the accumulated radiation was $100{\sim}50J{\cdot}cm^{-2}$). The drain rates per plant of 100-100, 50-45, 50-40, 50-35 were 26.3%, 8.8%, 6% 4.4% and 23.1%, 7.5%, 5% 3.4% in rockwool and cocopeat slabs. The water contents and EC of 100-100 and 50-45 were managed by the 55~70%, $3.0{\sim}5.0dS{\cdot}m^{-1}$ which were good condition for paprika culture in rockwool and cocopeat slabs, while those of 50-40 and 50-35 were managed by beyond 50%, $4.5{\sim}9.5dS{\cdot}m^{-1}$. The plant height, number of branches and leaf size of 100-100 and 50-45 were similarly increased while those of 50-40 and 50-35 were decreased. The fruit size and weight of 50-40 and 50-35 were small and light, while those of 100-100 and 50-45 were similarly big and heavy. The marketable fruits of 100-100 and 50-45 treatments were similarly more by 9.7~9.8 in rockwool and 8.8~8.9 in cocopeat, while the unmarketable fruits, the small and blossom end rot fruits were increased in 50-40 and 50-35 treatments. The yield of 100-100 and 50-45 treatments were similarly high.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.670-676
• /
• 2017

The purpose of this study is to analyze the shipbuilding structure of Hallabong Tangorover ten-day and monthly intervals, to determine whether the shipment control can stabilize and increase the income of Hallabong Tangor farmers by estimating and analyzing the price flexibility function of Hallabong, and to derive the policy implication. Looking at the overall market, the 1% increase in shipment volume indicates that the coefficient of price flexibility varies with time. The largest decline is in late December and early January. The dummy variable indicating the year in which the quality drops somewhat is statistically significant from March to May, and the average of them is -0.337%. This implies a greater importance for quality control and shipment control when quality is worse than good quality. The price flexibility, which indicates price changes due to 1% increase in monthly shipment volume of Hallabong Tangor, varies with time. The coefficient of price flexibility was the highest at -0.46 in December, but prices fell slightly due to quality improvement and the increase in special demand of New Year's demand, which was -0.33% in January, -0.261% in February, -0.307% in March, and -0.318% in April. Since then, the amount of storage has been gradually exhausted, and the price flexibility has fallen slightly to -0.243% in May and -0.236% in June. DUM02, which represents the year when more than 7 days after the New Year holidays are in February is from February to June (+). This indicates that the price decrease due to increase in volume is less than that in January when the New Year is in February. This indicates a greater necessity for shipment control when New Year holidays are in January.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.153-160
• /
• 2015

The objectives of this study were to determine optimal length of off-time between irrigation cycles to improve irrigation efficiency using a frequency domain reflectometry (FDR) sensor-automated irrigation (FAI) system for tomato (Solanum lycopersicum L.) cultivation aimed at minimizing effluent from coir substrate hydroponics. For treatments, the 5-minute off-time length between 3-minute run-times (defined as 3R5F), 10-minute off-time length between 3-minute run-times (defined as 3R10F), or 15-minute off-time length between 5-minute run-times (defined as 5R15F) were set. During the 3-minute or 5-minute run-time, a 60mL or 80mL of nutrient solution was irrigated to each plant, respectively. Until 62 days after transplant (DAT) during the autumn to winter cultivation, daily irrigation volume was in the order of 3R5F (858mL) > 5R15F (409mL) > 3R10F (306mL) treatment, and daily drainage ratio was in the order of 3R5F (44%) > 5R15F (23%) > 3R10F (14%). Between 63 and 102 DAT, daily irrigated volume was in the order of 5R15F (888mL) > 3R5F (695mL) > 3R10F (524mL) with the highest drainage ratio, 19% (${\pm}2.6$), at the 5R15F treatment. During the spring to summer cultivation, daily irrigation volume and drainage ratio per plant was higher in the 3R5F treatment than that of the 3R10F treatment. For both cultivations, a higher water use efficiency (WUE) was observed under the 3R10F treatment. Integrated all the data suggest that the optimal off-time length is 10 minutes.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.151-157
• /
• 2017

The objectives of this study were to determine the impact of soil water content on the growth, stomatal conductance, and photosynthesis of Kimchi cabbage and to evaluate proper parameters for development of growth models. There were five levels of irrigation amount treatments (0, 200, 300, 400, and 500 mL/d/plant) and those were commenced at one day after transplanting (DAT). We measured soil water content, stomatal conductance, photosynthesis characteristics, and the A-Ci curve. The growth of Kimchi cabbage as affected by irrigation amount was evaluated at 38 days after transplanting, however, the growth with 0 and 200 mL/d/plant irrigation amount treatments measured at 29 DAT. The relationship between soil water content and stomatal conductance was highly correlated ($r^2=0.999$) and the function represented by y = 6097.4x - 4.2984. The stomatal conductance of Kimchi cabbage leaves showed $300mmol{\cdot}m^{-2}{\cdot}s^{-1}$ when the soil water content was below $0.05m^3/m^3$. The stomatal conductance was rapidly decreased by scarcity of soil moisture. A-Ci curve indicated normal curve in fully irrigation treatment (500 mL/d/plant), however, $CO_2$ couldn't diffuse through the intercellular Kimchi cabbage leaves treated with 0 mL/d/plant. The dry weight of full irrigation treatment was greater approximately 6.8 times than that of deficit irrigation (0 mL/d/plant). In addition, leaf area index showed a logarithmic function (y = 16.573 + 3.398 ln x) with soil water content and that of R-squared represents 0.913. Results indicated that the soil water content was highly correlated with stomatal conductance and leaf area index. Indeed, the scarcity soil moisture reduced photosynthesis and retarded growth.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.31-40
• /
• 2021

The hydrogen in nominally anhydrous mineral is known to be associated with lattice defects, but it also can exist in the form of water and hydroxyl groups on the large surface of the nanoscale particles. In this study, we investigate the effectiveness of 1H solid-state nuclear magnetic resonance (NMR) spectroscopy as a robust experimental method to quantify the hydrogen atomic environments of amorphous silica nanoparticles with varying relative humidity. Amorphous silica nanoparticles were packed into NMR rotors in a temperature-humidity controlled glove box, then stored in different atmospheric conditions with 25% and 70% relative humidity for 2~10 days until 1H NMR experiments, and a slight difference was observed in 1H NMR spectra. These results indicate that amount of hydrous species in the sample packed in the NMR rotor is rarely changed by the external atmosphere. The amount of hydrogen atom, especially the amount of physisorbed water may vary in the range of ~10% due to the temporal and spatial inhomogeneity of relative humidity in the glove box. The quantitative analysis of 1H NMR spectra shows that the amount of hydrogen atom in amorphous silica nanoparticles linearly increases as the relative humidity increases. These results imply that the sample sealing capability of the NMR rotor is sufficient to preserve the hydrous environments of samples, and is suitable for the quantitative measurement of water content of ultrafine nominally anhydrous minerals depending on the atmospheric relative humidity. We expect that 1H solid-state NMR method is suitable to investigate systematically the effect of surface area and crystallinity on the water content of diverse nano-sized nominally anhydrous minerals with varying relative humidity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.616-616
• /
• 2013

그래핀(Graphene)은 열전도도가 높고 전자 이동도(200,000 cm2V-1s-1)가 우수한 전기적 특성을 가지고 있어 전계 효과 트랜지스터(Field effect transistor; FET), 유기 전자 소자(Organic electronic device)와 광전자 소자(Optoelectronic device) 같은 반도체 소자에 응용 가능하다. 최근에는 아크 방출(Arc discharge method), 화학적 기상 증착법(Chemical vapor deposition; CVD), 이온-조사법(Ionirradiation)등을 이용한 이종원자(Hetero atom)도핑과 화학적 처리를 이용한 기능화(Functionalization)등의 방법으로 그래핀의 전도도를 향상시킬 수 있었다. 그러나 이러한 방법들은 기판의 표면을 거칠게 하며, 그래핀에 많은 결함들이 발생한다는 단점이 있다. 이러한 단점을 극복하기 위해 자가조립 단층막법(Self-assembled monolayers; SAMs)을 이용하여 기판을 기능화한 후 그 위에 그래핀을 전사하면, 자가조립 단층막의 기능기에 따라 그래핀의 일함수를 조절 가능하고 운반자 농도나 도핑 유형을 변화시켜 소자의 전기적 특성을 최적화 할 수 있다 [1-3]. 본 연구에서는 PET(polyethylene terephthalate) 기판에 SAMs를 이용하여 유연하고 투명한 그래핀 전극을 제작하였다. 산소 플라즈마와 3-Aminopropyltriethoxysilane (APTES)를 이용하여 PET 기판 표면 위에 하이드록실 기(Hydroxyl group; -OH)와 아민 기(Amine group; -NH2)를 순차적으로 기능화 하였고, 그 위에 화학적 기상 증착법을 이용하여 합성한 대면적의 균일한 그래핀을 전사하였다. PET 기판 위에 NH2 그룹이 존재하는 것을 접촉각 측정(Contact angle measurement)과 X-선 광전자 분광법(Xray photoelectron spectroscopy: XPS)을 통해 확인하였으며, NH2그룹에 의해 그래핀에 도핑 효과가 나타난 것을 라만 분광법(Raman spectroscopy)과 전류-전압 특성곡선(I-V characteristic curve)을 이용하여 확인하였다. 본 연구 결과는 유연하고 투명한 기판 위에 안정적이면서 패턴이 가능하기 때문에 그래핀을 기반으로 하는 반도체 소자에 적용 가능할 것이라 예상된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.282-282
• /
• 2013

그래핀(Graphene)은 열 전도도가 높고 전자 이동도(200 000 cm2V-1s-1)가 우수한 전기적 특성을 가지고 있어 차세대 전자재료로써 유망한 후보로 간주되어 왔다. 최근에는 아크 방출(Arc discharge method), 화학적 기상 증착법(Chemical vapor deposition; CVD), 이온-조사법(Ion-irradiation) 등을 이용한 이종원자(Hetero atom)도핑과 화학적 처리를 이용한 기능화(Functionalization)등의 방법으로 그래핀의 전도도를 향상시킬 수 있었다. 그러나 이러한 방법들은 기판의 표면을 거칠게 하며, 그래핀에 많은 결함들이 발생한다는 단점이 있다. 이러한 단점을 극복하기 위해 자가 조립 단층막법(Self-Assembled Monolayers; SAMs)을 이용하여 기판을 기능화한 후 그 위에 그래핀을 전사하면, 자가 조립 단층막의 기능기에 따라 그래핀의 일함수를 조절 가능하고 운반자 농도나 도핑 유형을 변화시켜 소자의 전기적 특성을 최적화 할 수 있다 [1-3]. 본 연구에서는 PET(polyethylene terephthalate) 기판에 SAMs를 이용하여 유연하고 투명한 그래핀 전극을 제작하였다. 자외선 오존처리 (UV ozone treatment)를 이용하여 PET 기판 표면 위에 하이드록실 기(Hydroxyl group; -OH)를 기능화 화였고 이를 접촉각 측정(Contact angle measurement)을 통해 확인하였다. 또한 3-Aminopropyltriethoxysilane(APTES)와 톨루엔 (toluene)을 이용하여 PET 기판 표면 위의 하이드록실 기 위에 아민 기(Amine group; -NH2)를 기능화 하였고 이를 X-선 광전자 분광법(X-ray photoelectron spectroscopy: XPS)으로 분석하였다. 이렇게 만들어진 PET기판 표면 위에 화학적 기상 증착법을 이용하여 합성한 대면적의 균일한 그래핀을 전사하였다. NH2그룹에 의해 그래핀에 도핑 효과가 나타난 것을 라만 분광법(Raman spectroscopy)과 전류-전압 특성곡선(I-V characteristic curve)을 이용하여 확인하였다. 본 연구 결과는 유연하고 투명한 기판 위에 안정적이면서 패턴이 가능하기 때문에 그래핀을 기반으로 하는 반도체 소자에 적용 가능할 것이라 예상된다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.4
• /
• pp.343-350
• /
• 2000

In this paper, we propose the Multi-FPNN(Fuzzy Polynomial Neural Networks) model based on FNN and PNN(Polyomial Neural Networks) for optimal system identifacation. Here FNN structure is designed using fuzzy input space divided by each separated input variable, and urilized both in order to get better output performace. Each node of PNN structure based on GMDH(Group Method of Data handing) method uses two types of high-order polynomials such as linearane and quadratic, and the input of that node uses three kinds of multi-variable inputs such as linear and quadratic, and the input of that node and Genetic Algorithms(GAs) to identify both the structure and the prepocessing of parameters of a Multi-FPNN model. Here, HCM clustering method, which is carried out for data preproessing of process system, is utilized to determine the structure method, which is carried out for data preprocessing of process system, is utilized to determance index with a weighting factor is used to according to the divisions of input-output space. A aggregate performance inddex with a wegihting factor is used to achieve a sound balance between approximation and generalization abilities of the model. According to the selection and adjustment of a weighting factor of this aggregate abjective function which it is acailable and effective to design to design and optimal Multi-FPNN model. The study is illustrated with the aid of two representative numerical examples and the aggregate performance index related to the approximation and generalization abilities of the model is evaluated and discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.178-188
• /
• 2019

When using a distributed system, it is very important to know the intention of a target ship in order to prevent collisions. The action taken by a certain ship for collision avoidance and the action of the target ship it intends to avoid influence each other. However, it is difficult to establish a collision avoidance plan in consideration of multiple-ship situations for this reason. To solve this problem, a Distributed Stochastic Search Algorithm (DSSA) has been proposed. A DSSA searches for a course that can most reduce cost through repeated information exchange with target ships, and then indicates whether the current course should be maintained or a new course should be chosen according to probability and constraints. However, it has not been proven how the parameters used in DSSA affect collision avoidance actions. Therefore, in this paper, I have investigated the effect of the parameters and weight factors of DSSA. Experiments were conducted by combining parameters (time window, safe domain, detection range) and weight factors for encounters of two ships in head-on, crossing, and overtaking situations. A total of 24,000 experiments were conducted: 8,000 iterations for each situation. As a result, no collision occurred in any experiment conducted using DSSA. Costs have been shown to increase if a ship gives a large weight to its destination, i.e., takes selfish behavior. The more lasting the expected position of the target ship, the smaller the sailing distance and the number of message exchanges. The larger the detection range, the safer the interaction.