• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.991-997
• /
• 2013

A new frequency tuning scheme and a transconductor with a wide tuning range and low harmonic distortion is presented. This frequency tuning technique is based on the relationship between the time-constant and the elapsed times in charging a capacitor up to a certain level. Its structure is as simple as that of a conventional tuning scheme using a VCF(Voltage-Controlled Filter) and it does not need a pure sine wave but uses a CLK(Clock) pulse as a reference signal, which is easily obtained from on-chip system clocks or external X-tal oscillators. When a certain reference CLK is given, without complex capacitor arrays the pole frequency of the filter can be controlled continuously in the frequency domain. Simulation results are presented to confirm the operation of the proposed approach.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.610-615
• /
• 2014

Filterbanks have been widely used in the field of multi-channel signal processing for their simple efficient implementation architectures. Especially, the polyphase DFT(Discrete Fourier Transform) filterbank is the most preferred filterbank for the uniform spaced multi-channel processing due to its simplicity. In frequency hopped communication systems, however, the use of the polyphase DFT filterbank is limited due to its undesirable transient response from hop-to-hop transitions. In this paper, the transient response of polyphase DFT filterbanks in the hop-to-hop transition was analyzed, and the efficient methods to overcome such a problem was proposed. Simulation results showed that the proposed schemes could resolve this issue efficiently.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.212-216
• /
• 2005

In an ultrasonic glass scriber, the effect of ultrasonic vibration and its optimum driving frequency were investigated experimentally. To investigate the optimum ultrasonic frequency theoretically, the vibration model of the ultrasonic scriber is assumed. The frequency for maximum amplitude of acceleration is obtained theoretically. To investigate the depth of cutting edge corresponding the each frequency. The quartz glass plate specimen with a dimension of $200mm(L){\times}30mm(W){\times}3mm(T)$ is selected. The ultrasonic transducer is operated by the constant acceleration amplitude for the every frequency. The maximum crack depth was generated when the driving frequency was 18.35kHz. These results were in good agreement with those of the calculated model theoretically.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.145-151
• /
• 2005

Cheju-Haenam HVDC link transmits electrical power up to 300[MW] Because of its size, HVDC system has a great potential for damping power system oscillations. This paper with the frequency control of the KEPCO HVDC system linking Haenam to Cheju island. Frequency control at Cheju island ensures that the island AC system frequency is maintained Performance are evaluated using a reduced Cheju network and a detailed model of the fm system modelled in the PST software. Transient oscillations for the 3 phase fault carried out with HVDC frequency control are well damped as the control parameters have been adjusted.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.357-360
• /
• 2002

혈관에 흐르는 혈류 속도의 측정은 혈압 및 심박수와 관련된 혈류의 역학적 변화를 관찰하는 데 있어서 주로 사용되는 방법 중의 하나이다. 이 혈류 속도는 일반적으로 도플러 효과에 의하여 주파수가 변화하는 현상을 이용하여 추정하게 된다. 그런데 기존의 주파수 추정 방법들은 시불변 시스템을 가정하고 있지만 실제 혈관 속은 혈구가 일정하지 않은 속도를 갖는 시변 시스템이라 할 수 있기 때문에 이러한 시변 특성이 강한 경우 기존의 방법을 이용하게 되면 그 성능이 저하되는 경향을 보인다. 또 피시험자의 몸 상태에 따라서 서로 다른 주파수 변화 추이를 보이므로 하나의 고정 변수로써 최적화된 성능을 기대하기도 어렵다. 그러므로 본 논문에서는 시변 시스템에서 좋은 성능을 갖는 가변 망각 인자(variable forgetting factor, VFF)를 사용한 순환적인 완전 최소 자승법(recursive total least squares, RTLS) 기법을 이용한 주파수 추정 방법을 제안한다. RTLS란 TLS 기법을 순차적으로 계산하는 방법으로 시변 적응력을 향상시키는 방법이다. 또한 이 기법에 가변 망각 인자(VFF)를 적용시키는 것은 시변 시스템에서 외부적인 변화에 대하여 좀더 효율적으로 대응할 수 있기 위함이다. 기존의 방법과 성능 비교를 위하여 컴퓨터 시뮬레이션을 하였으며 그 결과 시변 시스템에서 본 논문에서 제안한 VFF를 이 용한 RTLS 기법이 보다 향상된 성능을 가지고 있음을 확인 할 수 있었다.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.7-11
• /
• 2014

In this paper, we designed resistive MMIC mixer using $0.5{\mu}m$ p-HEMT process. This Mixer is designed to have a similar performance in -4 ~ 4 dBm local oscillator signal power level and to maintain a constant conversion loss and linear performance due to the variation of local signal. In order to have such characteristics, we designed new feedback circuit topology by using FET, and minimized performance change for LO signal power level variation, also obtain MMIC mixer characteristics which is able to apply in wideband. In the design result, When the LO signal power is -4 ~ 4 dBm, there was 6 dB conversion loss and it came up with the excellent result that IIP3 got over 30 dBm in 0.5 ~ 2.6GHz frequency band.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.244-250
• /
• 2012

In this paper, The next Generation High Speed Railway Inverter system using RCF-PWM(Random Carrier Frequency Pulse Width Modulation) was developed to reduce electromagnetic noise. RCF-PWM method is randomized the switching frequency in the range between Semiconductor switching devices' maximum switching frequency and minimum switching frequency, Simulation program has been built using MATLAB/Simulink to verify the validity of study. Finally, the simulation results of Next Generation High Speed Railway inverter system using the RCF method was compared with the conventional SVPWM method.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.3-9
• /
• 1999

In this paper, the characteristics of LFM and CW signals in active sonar environment is investigated. CA, OS and TM CFAR processors are applied to the received CW/LFM signals which are plotted in the range/doppler domain. The performances of detection are analyzed. Particularly, using the real data, we certified that the results of the experiments are identical with the theoretical performance.

• 프린팅코리아
• /
• v.7 no.8
• /
• pp.38-43
• /
• 2008

RFID(Radio Frequency Identification)는 IC칩과 무선을 통해 식품, 동물, 사물 등 다양한 개체의 정보를 관리할 수 있는 첨단 인식 기술이다. 기존에 널리 사용되고 있는 바코드가 일정한 방향으로 인쇄된 내용을 리더기를 이용해야만 인식하는데 비하면 RFID는 초소형칩(IC)을 내장해 무선 주파수로 추적하기 때문에 인식범위가 넓고 인식 속도 역시 매우 빠르다. 뿐만 아니라 담을 수 있는 정보량에서도 모델에 따른 차이는 있지만 바코드와는 비교가 되지 않을 정도로 많다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1206-1207
• /
• 2011

하이브리드 발전시스템에서 전압과 주파수제어는 서로 다른 분산전원의 동기화 및 전력제어에 있어서 매우 중요하다. 본 논문에서는 디젤 발전 시스템에서 연료 분사량을 제어하여 주파수를 담당하는 Governor 제어기에 대한 제어 알고리즘을 개발하여 적용함으로써, 연료분사량을 최적화하여 일정한 속도제어를 하고자 한다. 이는 기본 제어기 알고리즘에 전력에 대한 전류 지령치를 첨가함으로서 제어기의 속응성 및 안정도를 개선할 수 있다. 또한 기존 디젤발전기의 부하에 따른 전압 및 주파수 특성을 분석하고, 시뮬레이션 함으로서 본 알고리즘을 검증하였다.