• 제목/요약/키워드: 일점계류

검색결과 7건 처리시간 0.02초

일점계류된 선박의 불안정 거동 방지에 관한 연구 (A Study on the Control of the Slew Motion of a Single Point Moored Ship)

  • 이승건;강동훈
    • 한국항해항만학회지
    • /
    • 제27권2호
    • /
    • pp.193-198
    • /
    • 2003
  • 일점계류된 선박의 외력에 의한 불안정 거동을 경감시키는 방법에 대하여 검토하였다. 계류된 선박의 수치계산 시뮬레이션을 위해 조종운동방정식을 사용하였고, 선박에 가해지는 외력으로는 풍력과 파강제력이 고려되었다. 파강제력은 3차원특이점분포법에서 얻어진 주파수전달함수로부터 시간영역해석법을 적용하였고, 풍력은 OCIMF(1994)에서 제시한 값을 사용하였다. 계류된 선박의 안전대책으로 바우스러스터를 이용한 제어방법, 두 번째 묘를 이용한 굴레(Birdle)를 씌우는 묘박법이 검토되었다.

불규칙파중 1점계류 선바의 거동해석에 관한 연구 (A Study on the Motion of a Single Point Moored Ship in Irregular Waves)

  • 이승건;조효제;강동훈
    • 한국항해항만학회지
    • /
    • 제27권1호
    • /
    • pp.55-61
    • /
    • 2003
  • 계류된 선박의 시뮬레이션을 위해 조종방정식을 사용하였고, 파 중의 선박에 가해지는 파강제력은 3차원 특이점 분포법에서 얻어진 주파수 전달함수로부터 시간영역해석법을 적용하였다. 운동을 유발하는 입사파의 주기와 동일한 선형 파강제력과 성분파 주파수의 차이에 기인하는 장주기 표류력을 외력항에 고려하였다. 규칙파와 불규칙 중에서의 선박의 거동을 비교하여 계류 중 선박에 발생할 수 있는 SLEW MOTION에 불규칙파 및 비선형 파강제력이 미치는 영향을 고찰하였다.

수치 해석 및 모형실험을 이용한 수중 일점 계류식 조류발전 장치의 운동 성능 고찰 (Investigation of Motion of Single Point Moored Duct-type TCP System by Both Numerical and Experimental Method)

  • 조철희;박홍재;조봉근;김명주
    • 한국수소및신에너지학회논문집
    • /
    • 제28권2호
    • /
    • pp.212-219
    • /
    • 2017
  • As an environmental pollution and global warming due to an excessive carbon emission are intensified, the importance of renewable energy is in rise today. TCP (Tidal Current Power), one of the renewable energy sources, generates electricity by converting kinetic energy of current into rotational energy of turbine. Also the TCP has a great advantages of predictability and reliability. Because the generating power is proportional to cubic of stream velocity, amplifying current speed by applying duct is highly effective to increase the generating power. SPM (Single Point Mooring) can be applied for the weather vane with various current direction and also augments generating power of the system. In addition, simple installation and retrieval could be a merit of SPM system. By combining duct and SPM, TCP system for relatively low-speed-current and shallow water region can be feasible and economical. In this study, single point moored duct-type TCP system was designed and the motion of submerged structure was investigated in both numerical and experimental method. DNV wadam V4.8-1 and OrcaFlex 10.0a were used for the frequency and time domain motion analysis of system respectively. Duct model scaled by 0.05 of Froude conformity ratio and CWC (Circulate Water Channel) are used for experiment.

SPM의 동적해석 S/W 개발 (Development of SPM Dynamic Analysis Software)

  • 이문성;김진석;조철희;홍성근;정광식
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2000년도 추계학술대회 논문집
    • /
    • pp.84-89
    • /
    • 2000
  • Thermal simulation of typical stack-type and newly proposed planar-type micro-gas sensors were studied by FEM method. The thermal analyses for the proposed planar structure including temperatur distribution over the sensing layer and power consumption of the heater were carried using finite element method by computer simulation and well compared with those of typical stack-type micro-gas sensor. The thermal properties of the microsensor from thermal simulation were compared with those of a actual device to investigate the acceptability of the computer simulation.

  • PDF

다물체 연성효과를 고려한 부유체의 동적거동 안전성 해석 (Dynamic Analysis of Floating Bodies Considering Multi-body Interaction Effect)

  • 김영복;김무현;김용욱
    • 대한조선학회논문집
    • /
    • 제46권6호
    • /
    • pp.659-666
    • /
    • 2009
  • Recently, there are several problems in space, contiguity and facility of the existing harbors issued due to the trend of enlarging the container capacity of the large container vessel, the Mobile Harbor has been proposed conceptually as an effective solution for those problems. This concept is a kind of transfer loader of the containers from the large container ship, which is a floating barge with a catamaran type in the underwater part, and so prompt maneuverability and work effectiveness. For the safe mooring of two floating bodies, a container and the mobile harbor, in the near sea apart from the quay, a robot arm mooring facility specially devised would be designed and verified through comparison study under various environmental sea condition in the inner and outer harbor. DP system (Dynamic Positioning System) using the azimuth thruster and a pneumatic fender, etc, will be considered as a next research topic for the mooring security of multi-body floaters.

해상용 태양광 발전 시스템의 설치 각도에 관한 연구 (A Study on the Installation Angle of the Marine Solar Power Generation System)

  • 오진석;장재희
    • 한국항해항만학회지
    • /
    • 제42권3호
    • /
    • pp.167-176
    • /
    • 2018
  • 해상에서 운용되는 일점계류형 해양플랜트의 태양광 발전 시스템은 독립 전원 체계를 가지고 있으며, 해상 환경, 부조일수 등의 영향으로 안정적인 전력을 공급하는 것이 중요하다. 이러한 이유로 태양광 패널을 여러 방향으로 설치하게 되는데, 이 때 각 패널마다 입사되는 광량이 달라지므로 부분음영현상이 발생하게 된다. 육상용 태양광 발전시스템의 발전량은 위도의 영향을 받으므로 우리나라의 경우 $30{\sim}36^{\circ}$ 사이의 각도로 설치하는 것이 일반적이나, 일점계류형 해양플랜트에 설치되는 태양광 발전 시스템의 경우 부분 음영 현상에 의해 최대전력점이 제어 가능 범위 밖에 존재하는 경우가 발생하게 되고 이는 전력 발전 손실이 된다. 이 때 두 패널의 광량차이를 줄임으로써, 최대 전력점을 MPPT 알고리즘이 추종 가능한 범위에 존재하게 하여 발전 효율을 더 높일 수 있으며, 시뮬레이션 결과 설치각도 $20^{\circ}$에서 가장 높은 발전 효율 가짐을 확인하였다.

터렛 계류된 부유체의 과대 선수동요에 관한 실험 연구 (Experimental Study of Excessive Yaw Motion of Turret Moored Floating Body)

  • 조석규;성홍근;홍장표;최항순
    • 대한조선학회논문집
    • /
    • 제50권1호
    • /
    • pp.8-13
    • /
    • 2013
  • Excessive yaw motion of a turret moored vessel was examined in this paper. The vessel was moored by an internal turret and catenary mooring lines. The experiments were conducted in regular waves. Turret moored vessel can oscillate from side to side or move to one particular direction, and eventually exhibit large yaw motion. The results showed that the excessive yaw occured for specific condition, ratio of wave lengths and vessel length. It was found that turret moored floating vessel was unstable for regular wave period from 14 to 18 sec and excessive yaw occurred to maximum 50 deg. The time series, trajectory, phase plot and qualitative analysis are performed. The analysis showed that the results of experiments agreed with the that of analytic method and the excessive yaw could be predicted by the stability analysis.