• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2575-2580
• /
• 2013

In this paper, we watch out key measure of the level of transportation service about travel time and delay time. And we measured vehicle traffic by moving vehicle method using CCTV which is one of the travel time measure. We should be measured in place of continuous traffic flow characteristics with wide traffic light interval. In addition, traffic flow on the other side of the interval must be sufficiently identifiable and at the end of this section must be possible U-turn. This method it requires only the driver of the vehicle because of the CCTV measure. In addition, We cannot require time, distance, and traffic equipment that can be recorded. Because equipped with the software to do that. In addition to traffic, average travel time, average space speed, traffic density are also available.

• 도로교통
• /
• s.97
• /
• pp.14-27
• /
• 2004

도로에 있어 교통량이 일정한 수준을 초과하여 증가되는 경우 통행시간과 운행비용이 과도하게 증대되는 혼잡현상이 발생하게 된다. 이러한 혼잡은 경제적 관점에서 추가분의 통행자가 기존 이용자의 통행비용을 증가시키는 유형으로 해석되고 있고, 이에 대한 대응으로 많이 사용되어 왔던 방법이 개별 통행자에게 다른 이용자들의 통행비용 증가분에 상응하는 요금을 혼잡통행료로서 부과하는 방법이다. 이와 같은 혼잡통행료는 국내의 경우 도심부로 진입하는 특정 도로에 국한하여 시행되는 것을 일반적인 것으로 인식하고 시행해왔으나(서울시 남산1, 3호 터널) 국외의 경우에는 환경보호 및 수요조절 측면에서 고속도로까지 확대 시행하고 있는 사례를 찾아볼 수 있다. 이에 본 연구에서는 국내의 고속도로 요금체계 현황에서 혼잡 통행료의 도입방안 및 가능성을 검토하고자 한다. 고속도로의 현행 통행료 부과 방법 및 제도를 고려할 때 통행요금에 혼잡통행료를 도입할 경우 1)시간대별 차등요금제, 2)폐쇄식 및 개방식 구간에서의 차등요금제, 3)노선별, 구간별 차등요금제, 4)요일별, 계절별 차등요금제를 고려할 수 있다. 현재의 고속도로에서 혼잡통행료를 도입할 경우 현행 이부요금제의 주행요금에 혼잡통행료 개념을 도입하는 것이 타당할 것으로 검토된다. 시간대별 차등요금제는 그 시간대를 주간(06시~24시)과 야간(24시~06시)으로 구분함이 타당할 것으로 판단되고 폐쇄식 구간의 경우 혼잡도를 고려한 주행요금을 이용거리에 비례하여 부과하며 개방식 구간의 경우 최단 이용거리를 기준으로 혼잡도를 고려한 주행요금을 부과하는 것이 타당할 것으로 판단된다. 또한 혼잡도를 고려한 주행요금을 부과하는데 있어 노선별, 구간별 차등을 두는 것이 바람직할 것으로 기대된다. 그러나 요일별 차등요금제는 주 5일 근무제가 확산됨에 따라 증가하는 비업무 승용차의 통행에 의해 고속도로의 비효율적인 운영이 발생할 경우를 제외하고는 적용하지 않는 것이 타당할 것으로 검토된다.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.87-93
• /
• 2004

A five-day work week has a great impact on the life styles of employed persons and their families. At the same time, the changes also impact on the transportation system because travel patterns, demand, and pattern of congestion change during weekends. The negative impacts on the transportation system should be examined in order to conceive measures to maintain dependable levels of service during weekends. The first step to pursue the issue is to identify the road segments heavily affected by augmented leisure trips. In this study, characteristics of highway segments are engineered by principal analysis using data from TCS database. Scores from principal analysis are employed to distinguish highway segments for leisure trips from total 197 segments considered in this study. In addition, indexes from principal analysis are proposed to identify highway segments for leisure trips.

• Journal of Korean Society of Transportation
• /
• v.19 no.2
• /
• pp.43-52
• /
• 2001

대부분의 관측교통량기반 수요추정기법은 소규모 및 중규모 교통망 등의 상대적으로 규모가 작은 교통망에서 기본적으로 가정된 수요를 가지고 얻은 추정O/D를 기본O/D와 비교하여 그 추정의 정확성이 어느 정도인가를 오차분석법 등을 이용하여 비교.분석하는 것이 그 주요한 분석방향이라고 할 수 있었다. 이러한 접근법은 실제 현실에서는 알 수 없는 참O/D나 참관측교통량을 가정하고 제시된 모형을 면밀히 관찰하여 모형의 장단점이 무엇인지를 파악하거나 타모형과의 비교.분석을 용이하게 하고자 할 때 많이 이용된다. 그러나 이러한 가정된 교통망이나 참O/D(true O/D) 등은 모형의 적용가능성을 살필 경우에 이용 가능한 방법이라고 할 수 있지만, 참O/D를 알지 못하는 현실상황(대규모 교통망)에서는 추정O/D의 신뢰성을 평가하기란 매우 힘든 작업이거나 거의 불가능한 일이라 할 수 있다. 이러한 문제점을 보완하고자 본 연구에서는 서울시의 1996년도 교통센서스 자료를 이용하여 가정된 수요가 아닌 실제적이고 현실적인 자료를 가지고 대규모 교통망에서 이용될 수 있는 모형을 살펴보았다. 연구방법은 대규모 교통망에 기존의 단일차종기반모형과 본 연구에서 제시한 다차종(multiclass)기반모형을 적용하여 추정된 O/D에 TLFD(Trip Length Frequency Distribution)개념을 이용하여 추정된 O/D의 신뢰성을 평가하고자 하였다. 또한, $R^2$를 이용하여 모형 적용 전후의 관측교통량과 배분교통량을 비교하여 추정력을 분석하였다. 본 연구에서는 단일차종기반모형보다는 차종간 혼잡효과 및 노선선택비율을 차종별로 감안할 수 있는 다차종기반모형이 대규모교통망에서는 보다 적절한 결과를 나타내는 것으로 분석되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.539-547
• /
• 2012

Increasing the mode transfer volume between public transportation modes has known to be necessary for efficiency improvement of public transportation system operation and it is also found to be important to have relevant transfer point selection with reflection of current travel pattern. This study is in regards to providing a selection guideline for the location of transfer point between public transport modes. This case study has been carried out for Daegu Metropolitan City especially for public transportation users behaviour by analysis of daily usage of transportation card to identify the transfer travel pattern. A cluster analysis was applied to categorize the pattern of transfer stop which induces many users and a discriminant analysis also utilized for grouping the stops by number of transfer trip. This research produces the estimation result of transfer volume for urban railway system no.3 in Daegu City which is currently under construction. In addition, the locations of transfer center has also been proposed.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.117-130
• /
• 2005

In both deteministic user Optimal Traffic Assignment Model (UOTAM) and stochastic UOTAM, travel time, which is a major ccriterion for traffic loading over transportation network, is defined by the sum of link travel time and turn delay at intersections. In this assignment method, drivers actual route perception processes and choice behaviors, which can become main explanatory factors, are not sufficiently considered: therefore may result in biased traffic loading. Even though there have been some efforts in Stochastic UOTAM for reflecting drivers' route perception cost by assuming cumulative distribution function of link travel time, it has not been fundamental fruitions, but some trials based on the unreasonable assumptions of Probit model of truncated travel time distribution function and Logit model of independency of inter-link congestion. The critical reason why deterministic UOTAM have not been able to reflect route perception cost is that the route perception cost has each different value according to each origin, destination, and path connection the origin and destination. Therefore in order to find the optimum route between OD pair, route enumeration problem that all routes connecting an OD pair must be compared is encountered, and it is the critical reason causing computational failure because uncountable number of path may be enumerated as the scale of transportation network become bigger. The purpose of this study is to propose a method to enable UOTAM to reflect route perception cost without route enumeration between an O-D pair. For this purpose, this study defines a link as a least definition of path. Thus since each link can be treated as a path, in two links searching process of the link label based optimum path algorithm, the route enumeration between OD pair can be reduced the scale of finding optimum path to all links. The computational burden of this method is no more than link label based optimum path algorithm. Each different perception cost is embedded as a quantitative value generated by comparing the sub-path from the origin to the searching link and the searched link.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.75-89
• /
• 2006

This paper presents a practical and realistic Life-Cycle Cost (LCC) optimum design methodology of steel bridges considering time effect of bridge reliability under environmental stressors such as corrosion and heavy truck traffics. The LCC functions considered in the LCC optimization consist of initial cost, expected life-cycle maintenance cost and expected life-cycle rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socio-economic losses. For the assessment of the life-cycle rehabilitation costs, the annual probability of failure which depends upon the prior and updated load and resistance histories should be accounted for. For the purpose, Nowak live load model and a modified corrosion propagation model considering corrosion initiation, corrosion rate, and repainting effect are adopted in this study. The proposed methodology is applied to the LCC optimum design problem of an actual steel box girder bridge with 3 continuous spans (40 m+50 m+40 m=130 m), and various sensitivity analyses of types of steel, local corrosion environments, average daily traffic volume, and discount rates are performed to investigate the effects of various design parameters and conditions on the LCC-effectiveness. From the numerical investigation, it has been observed that local corrosion environments and the number of truck traffics significantly influence the LCC-effective optimum design of steel bridges, and thus realized that these conditions should be considered as crucial parameters for the optimum LCC-effective design.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.3
• /
• pp.1-11
• /
• 2023

COVID-19 has caused the dramatic reduction of public transportation demand in Busan Metropolitan City, that is, daily public transportation trips in 2020 dropped by approximately 920,000 trips from 2019 based on the public transportation card data. This study investigated the underlying factors affecting the public transportation demand discrepancy between before and after COVID-19 at the primary administration unit(i.e., Eup, Myeon, Dong) level with Ordered Logistic Regression model. Finding of this study is as follows. The primary administration units characterized with high ratio of welfare recipients, industrial area, and day boarders were heavily dependent on public transit, indicating little change in public transportation demand. On the other hands, the primary administration units which have high ratio of urban rail transit uses experienced significant reduction of public transportation demand. In conclusion, transportation policies taken under emergent situation such as COVID-19 need to take into account the region-based characteristics rather than unilateral ones.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.101-109
• /
• 2007

Two variations of toll roads exist: mainline toll plazas and entry/exit tolls. On a mainline toll system(open toll scheme), all vehicles stop at various locations along the highway to pay a toll. While this may save money from the lack of need to construct tolls at every exit, it can cause lots of traffic congestion, and drivers could evade tolls by going around them. With entry/exit tolls, vehicles collect a ticket when entering the highway, which displays the fares it will pay when it exits, increasing in cost for distance travelled. Upon exit, the driver will pay the amount listed for the given exit. The pressures on the Seoul ring roadway network have been changing over time. In the past, the emphasis was on mobility and maintenance of the road network to provide an efficient transportation network, but recently, road use has outstripped the network's ability to extend and expand the road network and hence the policy emphasis has moved towards reducing free riders rather than mitigating its effects. In addition to this pressure is an incidental pressure, which argues that provision of free ride segments generates further traffic in isolation of other factors. This paper is examining policies to reduce the burden of traffic congestion in Seoul ring roadway which is used open toll scheme for decades. One key mechanism to achieve this policy aim is automatic charging mechanism on freeway, but if a nation-wide electronic toll collection is to be implemented successfully, there are a number of prerequisites which must be place.

• Journal of Navigation and Port Research
• /
• v.38 no.1
• /
• pp.65-71
• /
• 2014

Gyeongbu and Namhae expressways in the country, are the major arterial highways which are connected with the Busan port in the north-south and east-west directions, respectively, and required to study the traffic characteristics about the hourly volume factors(K-factor) by concentrated midium-size and large-size cargo trucks of 20% or higher in expressways. We therefore attempted to predict the K-factor in expressways through the correlation analysis between K-factor and K-factor estimates on the basis of the short-term VDS data collected at the basic segments of the above major expressways. As a result, power model appeared to be appropriate in predicting K-factor by the K-factor estimate based on VDS data for 7 days with a high explanatory power and validity.