• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.97-104
• /
• 2010

This study evaluated the energy efficiency of a windows system using built-in blinds, with regard to their insulation performance and their blocking of solar radiation. The study took advantage of the "Physibel Voltra" program as a physical simulation of heat transfer. To simulate the "Physibel Voltra" program, I practiced a mock-up test to determine heating quality and translation condition. I analyzed the propensity to annual energy consumption, the annual quantity of heat transfer, and the annual cooling and heating cost through a computer simulation for one general household in an apartment building. In the test, it was found that compared to a general windows system, a windows system with built-in blinds reduced the annual heat transfer by 10% in cooling states and by 11% in heating states when the blind was up. When the blind was down, the windows system with built-in blinds reduced the annual heat transfer by 25% in cooling states and 30% in heating states. When a windows system with built-in blinds is compared with a general windows system, the quantity of cooling and heating loads is reduced by 283.3kw in cooling states and 76.3kw in heating states. This leads to a reduction in the required cooling and heating energy of 359.6kw per house. It is thus judged that the use of a windows system with built-in blinds is advantageous in terms of reducing greenhouse gas emissions, because the annual TOE (tons of oil equivalent) per house is reduced by 0.078TOE, while $tCO_2$ is reduced by $0.16tCO_2$. In addition, compared with a general windows system, the cost of cooling and heating loads in the system reduces the annual cooling cost by 100,000won, and the annual heating cost by 50,000won. Ultimately, this means that cooling and heating loads are cut by 150,000won per year.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.127-134
• /
• 2017

In this study, moist curing equipment was used in the exist gang-form system. By achieving sufficient spray curing, the quality of the concrete was improved and the cracking occurred in building's side wall was decreased. The following results could be made as the conclusion. For the compressive strength, all zones showed the similar results. Comparing with the zone without using moist curing equipment, the zone used moist curing equipment showed higher rebound hardness results. For the cracking, the zone utilized moist curing equipment showed the cracking averaged as 6.6 m and the zone without using moist curing equipment showed the cracking averaged as 10.3m. The effectof reducing cracking by utilizing moist curing equipment is about 36 %. Using moist curing equipment is considered as a good solution to reduce the cracking in the structure. Considering all the factors analysed, using moist curing equipment improved the quality of the concrete and decreased the cracking. When this equipment was used in the construction site, it is expected that the construction periodcan be shrunk and the ratio of defect caused by drying shrinkage can be decreased. In this research conditions, The 0.3mm sized moist curing equipment provided the most desirable results on concrete quality and preventing cracking.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.81-88
• /
• 1996

Remote sensing technique is a probable means to estimate distribution of actual evapotranspiration over wide area in connection with regional characteristics of vegetation and landuse. Factors controlling evapotranspiration from ground are air temperature, humidity, wind, radiation, soil moisture and so on. Not only the vegetation influences directly the evapotranspiration, but also these factors strongly influnce the vegetation at the area. Therefore we can expect high correlation between the evapotranspiration and the vegetation. To grasp the state of vegetation at any point, NDVI calculated from NOAA/AVHRR data is utilized. It can be considered that evapotranspiration at a forest region is linearly proportional to the NDVI. Here, a model which adopts a direct method to estimate actual evapotranspiration is developed by using the relationship between NDVI and evapotranspiration. This method makes possible to estimate evapotranspiration of Korean Peninsula including North Korea where enough meteorological and hydrological data are unavailable.

• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.178-199
• /
• 2014

Changwon Industrial Complex is commonly framed as the best example of strong initiative of the Korean developmental state. And this explanation has been given in the theoretical frame of 'neo-Weberian accounts' i.e., strongly 'national-territorial' and state-centric terms of the predominant. I argue that a geopolitical economy approach focusing on the historical background of the development of Changwon Industrial Complex will shed light on crucial sociospatial dimensions of the Korean developmental state's industrial complex success. I examine, in particular, the multi-scalar processes through which the changes of the industrial complex building plans for the promotion of machine industry in 1960's have been influenced by the complex and dynamic interactions among social actors acting at diverse geographical scales. I show that the formation of the industrial complex in Korea was more heavily influenced by the interactions, contestations, and collaborations among social actors, acting in and through the state, rather than by the state initiative.

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.290-297
• /
• 1998

In this study an optimization of greenhouse roof shape was performed to maximize solar light transmission which is one of the most important elements in greenhouse environment. To determine roof shape that maximize the total light transmissivity, a computer model for analysing light transmissivity was composed and the Genetic Algorithms was applied for solving optimization problems. By setting composite model as objective function(fitness function), the optimum combination of design variables(roof inclination angle, width ratio) was searched using Genetic Algorithms. The optimum combination of input variables for the maximum light transmissivity at Suwon in winter was found 40 degree root angle , 0.5 width ratio, for two span greenhouses and 37 $_。 / roof angle, 0.7 width ratio, for single span greenhouses.es.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.237-237
• /
• 2011

효율적인 지하수 관리를 위해서는 시공간적인 변동성을 고려한 지하수 함양률의 정량적 산정이 필수적이다. 본 연구에서는 지표수-지하수 연동해석이 가능하며 토지이용 특성과 국내 토양특성을 가장 잘 표현할 수 있는 한국형 장기 유출 모형 SWAT-K를 이용하여 진천지역의 분포형 지하수 함양량을 산정하였다. 행정경계와 수자원단위지도에서 제시하는 표준단위유역을 기준으로 하여 진천군을 포함하는 미호천유역을 SWAT-K 구동을 위한 모델영역으로 설정하여 주하도를 따라 34개의 소유역으로 구분하였다. SWAT-K를 구동하기 위해서는 기상 및 수문자료를 구축해야 하는데 강우량을 비롯하여 기온, 풍속, 일사량, 상대습도 등의 기상자료가 요구된다. 본 연구에서는 대상유역 내에 위치한 청주, 충주, 대전, 이천, 보은, 천안 기상관측소의 자료를 이용하여 기상자료를 구축하였으며, 모형의 계산시간, 모형결과의 정확도 등을 판단하여 30m 공간해상도를 가지는 DEM을 300m 공간 해상도로 가공하여 사용하였다. 토지이용도는 모의시 다양한 토지이용상태를 반영할 수 있도록 중분류(1:25,000) 토지이용도를 사용하였다. 토양도는 국립농업과학원에서 토양도 전산화 사업을 통해 구축된 1:25,000 축척의 정밀토양도를 사용하였다. SWAT-K를 이용하여 진천군을 포함한 미호천 전체유역에 대해 지표수-지하수 통합 물수지 분석 결과(2004년~2009년) 연평균 강수량 대비 유출률은 66.6%, 증발산률은 34.6%, 함양률은 20.8%로 나타났다. 지표수 유출과정과 지하수위 변동을 동시에 고려하여 산정한 소유역별 연간 함양량 결과를 산정하였고, 총 34개의 소유역별 연간 지하수 함양량을 제시하였다. 또한 SWAT-K 모형을 이용한 모델 영역중 진천군에 속하는 행정구역별, 표준권역별 연평균 함양량을 산출하였으며, 그 분석 결과 진천군 평균 함양률은 20.5%로 산정되었다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.5
• /
• pp.63-72
• /
• 2020

Solar-sharing, which is an agricultural photovoltaic system installing solar panels on the upper part of crop growing field, has especially drawn attention. Because paddy fields for cultivating crops are large flat areas, there have been various attempts to utilize solar energy for solar photovoltaic as well as growth of crops in agriculture. Solar-sharing was first proposed in Japan, and has been actively studied for optimization and practical uses. The domestic climate differs from the climate conditions in which the solar-sharing has been widely studied, therefore, it is required to develop the solar-sharing technology suitable for the domestic climate. In this study, a simulation model was developed to analyze the change of solar radiation resulted from the solar-sharing installation. Monthly solar illumination intensity and the change of illumination intensity according to the various conditions of solar panel installation were simulated. The results of monthly illumination analysis differed by altitude of the sun, which was related to season. In addition, it was analyzed that the monthly illumination decreased by up to 42% due to solar-sharing. Accordingly, it is recommended that solar-sharing should be installed as a way to maximize the efficiency of solar photovoltaic system while minimizing the decrease in solar radiation reaching the crops.

• Journal of Korea Water Resources Association
• /
• v.37 no.8
• /
• pp.631-641
• /
• 2004

The objective of this study is to test the applicability of SLURP (Semi-distributed Land Use-based Runoff Process) on Soyanggang-dam watershed. SLURP model is a conceptual semi-distributed form model that can be used to examine irrigation plan and the effects of proposed changes in water management within a basin or to see what effects external factors such as climate change or changing land cover might have on various water users. Topographical parameters were derived from DEM using TOPAZ and SLURPAZ. Monthly NDVIs were calculated from multi-temporal NOAA/AVHRR images during four years (1998 ∼ 2001). Weather elements (dew-point temperature, solar radiation, maximum/minimum temperature and relative humidify) were obtained from five meteorological stations within and near the study area. To simulate daily hydrograph during 1998 ∼ 2001, the model parameters of each land cover class were optimized by sensitivity analysis and SCE-UA method. Test result of SLURP was summarized by various statistics method (WMO volume error, Nash-Sutcliffe efficiency, mean error and coefficient of variation).

• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.39-47
• /
• 2014

Solar applications analysis and building energy performance depend on the quality of the solar resource data available. Unfortunately, most of the weather stations do not measure solar radiation data in Korea, as a reason many researchers have studied different solar radiation estimation models and suggested to apply them to various locations in Korea. In addition, they also studied the impact of hourly global solar radiation on energy performance of an office building by comparing the simulated building energy consumptions using four different weather files, one using measured, and three estimated solar radiation from different models, which are Cloud-cover Radiation Model (CRM), Zhang and Huang Model (ZHM), and Meteorological Radiation Model (MRM), and concluded that there was some impact on energy performance of the building due to the using different solar radiation models. However, the result cannot be applied to all other buildings since the simulated office building for that study only used limited building characteristics such as using fixed values of solar heat gain coefficient (SHGC) and window-to-wall ratio (WWR), which are significant parameters related to solar radiation that affect to the building energy consumptions. Therefore, there is a need to identify how the building energy consumption will be changed by varying these building parameters. In this study, the impact of one measured and three estimated global solar radiation on energy performance of the office building was conducted taking account of SHGC and WWR. As a result, it was identified that the impact of four different solar radiation data on energy performance of the office building was evident regardless SHGC and WWR changes, and concluded that the most suitable solar models was changed from the CRM/ZHM to the MRM as SHGC and WWR increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6366-6371
• /
• 2014

This study examined the structural elements of Korean-style houses (Hanok) and proposed formula accounting for their similar patterns and regular behavior. The design of modern apartment buildings adopts many aesthetic elements from Hanok but those are only for interior decoration. In this study, the projected Hanok eaves were examined in terms of the length of solar insolation. Leaning pillars toward the inside of the building were analyzed in detail not only for the front and back pillar, side pillar, but also the corner pillar. This study also suggested a design element from the Hanok structure, such as the elevated balcony, porch flooring, and inner garden in porch area. In addition, the new apartment plan improved air circulation, ventilation and natural lighting.