• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.445-448
• /
• 2015

Recently there has been increasing interest in the filter to reduce the proportion of low-energy photons in the polychromatic X-ray, affect the quality of the image quality by X-ray hardening effect is a situation that has been overlooked. In this study, by evaluating the change in FSR based on the filter and it was quantitatively discuss scatter dose affecting the medical image quality. The results of the experiment, as the thickness of the filter is increased, up to 13.9%p, that tends to FSR increases appearance were evaluated. Based on these results, in compliance with the thickness of the filter that has been recommended in KS standard, even while reducing the radiation dose of the patient, in addition to the noise to about 1%p within the FSR only medical image the contribution to it is conceivable. Therefore, even while reducing radiation dose of the patient, in order to improve the quality of the medical image, the use of appropriate filter is considered important.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.498-504
• /
• 2015

The purpose of the present study is to provide preliminary data for turning sweetpotato leaves into dehydrated vegetables. To achieve this goal, we have gone through the process of hot-air drying the leaves of sweetpotato that are usually thrown away and examined the drying speed and rehydration resilience, then made a comparative analysis of the general ingredients, lutein, $\beta$-carotene and chromaticity. The drying speed reached the peak at a temperature of $70^{\circ}C$. As for other general ingredients, there was no significant difference according to temperature. The content of lutein, which is a functional ingredient, was large in Shinmi with $171.59{\mu}g/g$ at a temperature of $40^{\circ}C$; small in Hayanmi with $73.75{\mu}g/g$ at a temperature of $70^{\circ}C$. The content of $\beta$-carotene was large in Shinmi with $379.59{\mu}g/g$ at a temperature of $40^{\circ}C$; small in Hayanmi with $170.78{\mu}g/g$ at a temperature of $70^{\circ}C$. The content of functional materials was the largest at a temperature of $40^{\circ}C$, and decreased in the order of temperatures at $50^{\circ}C$, $60^{\circ}C$, and $70^{\circ}C$. As for rehydration stability, rehydration rate in both Shinmi and Hayanmi was the highest at a temperature of $40^{\circ}C$ with 233.93% and 223.47% respectively. To summarize, the quality of dried sweet potato leaf was more affected by temperature than by drying time, and low temperature drying resulted in better product value.

• Journal of the Korean Society of Radiology
• /
• v.8 no.6
• /
• pp.333-338
• /
• 2014

The fact is that in addition to an increase in social needs that must be managed systematically unnecessary exposure in the field of medical Recent important that the shield has emerged. However, products that are now in practical use, are not subdivided as compared to various medical radiology. Therefore, in the present study, we tried to present with the help of Monte Carlo simulation the structure of the shielding material that has been optimized. Simulated estimation result, the energy of the mammography for (30 kVp) spectrum, check the shielding rate of 90% or more $30{\mu}mPb$, at 2 mmAl case of shielding material of a single, at design time of 1 mmAl and 0.03 mmPb a double shield structure it is determined that more efficient. Also, check the blocking rate of 90% or more $340{\mu}mPb$, at 30 mmAl energy captured general in (80 kVp) spectra, it is considered that a double shield structure, design 1 mmAl and 0.3 mmPb is useful. These results, be used as basic material for the development of commercialization customized products for dose reduction is expected.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.270-276
• /
• 2008

The purpose of this study is to deal with fire fighting safety education primarily among the fields of child safety education. So, first of all, this study considered the theoretical background of fire fighting safety education. And this study analyzed the present state and cases of safety accidents in elementary schools. And by focusing on the fire fighting science class for elementary schools which Gyeonggi-do Goyang fire station is executing now, this study analyzed the educational outline, present state, educational goal, and content of fire fighting science class, and conducted the satisfaction survey through questionnaire over the elementary school students participating in fire fighting science class and the fire fighting officers in charge of fire fighting science class. On basis of this research, by developing the new field of fire fighting education and publicity into the program which can diffuse the fire fighting-related chemical experiment based on the science of chemistry and physics in the future and so provide the pleasure and surprise of experiencing directly not only natural fire fighting education and publicity but also learning and the common sense of fire fighting, this study tried to present the alternatives about the measures for activating the fire fighting safety education in elementary schools.

• Journal of the Korean Society of Radiology
• /
• v.10 no.2
• /
• pp.133-138
• /
• 2016

This research is a study on the welfare satisfaction of radiological technologists in university hospital, and was conducted in order to analysis of welfare factors and improvements. The survey was conducted on radiological technologist of a university hospital in Gyeongnam from July 14th 2014 to August 14th 2014, and we analyzed 121 of the questionnaire, which was retrieved by distributing. As a result, we looked at the welfare level of satisfaction by welfare hospital factors, each of the satisfaction scores were living welfare supports($2.83{\pm}0.43$), financial supports($4.25{\pm}0.65$), housing supports($2.28{\pm}0.46$), educational supports($2.58{\pm}0.50$), health medical supports($3.02{\pm}0.56$), culture and leisure supports($2.79{\pm}0.45$), other welfare supports($2.70{\pm}0.48$) points. The level of satisfaction with the hospital welfare support factors of average score level it was analyzed. It is important that is providing effective hospital welfare through survey for hospital welfare needs and benchmarking of welfare system of general corporate.

• Clinical and Experimental Reproductive Medicine
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2003

연구목적: 일반적으로 IVF-ET에서 가장 높은 임신율을 얻는 방법은 5 day ET (배반포기 배아 이식)이지만 장기간 배양이 적절하지 못한 경우에는 $2{\sim}4$일째에 ET를 실시하고 나서 $5{\sim}7$일째에 배반포기에 도달한 배아를 재이식 (SET)하여, SET의 효용성에 대하여 조사하고자 실시하였다. 연구재료 및 방법: 48주기의 환자에서 회수한 난자와 수정란은 10%와 20% hFF가 첨가한 DMEM에서 이식 직전까지 각각 공배양하였다. 채란 2일 (group I, day 2 ET), 5일째 이식 (group II, day 5 ET) 또는 재이식 (group III, SET; 2-5, 2-6, 2-7, 3-5, 4-7일)을 실시하면서 수정률, 할구분할률 및 임신율을 각각 비교하였다. 결과에 대한 통계 분석을 SAS (version 6.2)를 이용한 Duncan's Multiple Range Test를 이용하여 p값이 0.05 보다 작을 때 통계적으로 유의차가 있는 것으로 하였다. 결 과: 수정률은 group II (90.5%)가 다른 군에 비하여 높게 (p<0.05) 나타났다 (group I: 80.6%; group III: 82.9%). 할구분할률은 군간에 차이가 없었다 (수정란 당 $93.3{\sim}99.1%$). 임상적 임신율은 group II와 III (각각 58.3%)가 group I (33.3%) 보다 높게 나타났다. 그러나 처리군이 적어서 통계적인 차이는 없었다. 결 론: 배반포기 배아를 단독 이식하는 것이 임신율을 높일 수 있는 최선의 방법으로 나타났지만, 채란수가 적거나 수정률이 저조한 경우에는 $2{\sim}4$일째에 ET를 실시한 후 여분의 배아를 배반포기까지 배양한 다음 $5{\sim}7$일에 재이식 (SET)하면 blastocyst ET에서 나타날 수 있는 이식 자체의 실패를 방지할 수 있으면서 임신율을 높일 수 있는 이식 기법이 될 것이다.

• Journal of the Korean Society of Radiology
• /
• v.4 no.4
• /
• pp.37-40
• /
• 2010

In this paper, transport properties of charge carrier which is produced by x-ray exposure were investigated.. It is the research of charge transport and specific property of trap that is performed in direct digital x-ray image receptor. We measured transit time and drift mobility of charge carriers of a-Se photoconductor using time-of-flight method. We made a testing glass with a-Se of $100{\mu}m$ thickness on corning glass using thermal evaporation method. As a result of this experiment, electron and hole transit time was each $229.17{\mu}s$ and $8.73{\mu}s$ at $10V/{\mu}m$ electric field and drift mobility was each $0.00174cm^2/V{\cdot}s$, $0.04584cm^2/V{\cdot}s$. But the results shows us different measurement value of electron and charge drift mobility and it was investigated about charge transport properties and trap mechanism.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.338-341
• /
• 2001

A new passive nutrient supplying system (PNS) was designed. The experiment was conducted to compare PNS with automatic hydroponic system (AHS) by investigating the growth characteristics of muskmelon (Cucumis melo L.) in spring and summer. No significant differences in growth characteristics of leaf area and shoot dry weight were observed between PNS and AHS. However, better netting of melon fruit was shown in PNS. Sugar content of melon fruit was also $1.0-2.0Brix^{\circ}$ higher in PNS than in AHS. The suitable substrate for melon culture with PNS was the mixture of perlite 70% and rice hull 30%. These results suggested that new PNS could be introduced to growers without any loss of fruit yield and quality of muskmelon.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.293-296
• /
• 2008

The member deflection is one of the most important considerations for the serviceability evaluation of reinforced concrete (RC) structures, and the concept of the effective moment of inertia has been generally used for its estimation. However, the actual service load applied on an existing RC beam may not be easily obtained, for which the estimation of beam deflection by existing methods can be difficult work. Therefore, based on the close relationships between cracks and deflection in a RC beam, this study proposed a method to estimate the deflection of RC beams directly from the condition of cracks not using the actual loads acting on the member as its input data. The proposed method extensively utilized the relationships among sums of crack widths, average strains, and curvatures, and modification factors obtained from regression analysis were also introduced to improve its accuracy. The deflections of members were successfully estimated by the proposed method independent from applied loads, which was also easy to apply compared to the existing methods based on the effective moment of inertia. This new method, however, has limitations in its applicability in that it is less accurate than the existing methods because the magnitude of acting load is not involved in the estimation process of member deflection, and that it requires the measurement of crack widths along the whole length of a member.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.708-713
• /
• 2014

Trusses are widely used for wooden houses in the areas where wood construction in generalized for residential housings such as North America, Australian, New Zealand. In Korea, joist and rafter system is generally used because of the production cost, transportation cost and lack of experience required for truss manufacturing. In this study, roof trusses and flat trusses were manufactured by using oriented strand board (OSB) gusset plates for field assembly and tested under bending load to obtain the allowable loads. The allowable load and the actual load of 6m span roof trusses were 10.60 kN and 5.26 kN, respectively, which is regarded to be sufficient for use in construction. The allowable load and the actual load of 6m span floor flat trusses were 7.18 kN and 7.43 kN, respectively. For flat trusses, the allowable load is slightly lower than the actual load but the difference in very small, and it is thought that flat trusses can be used for construction by applying small change of structures and members.