• Title/Summary/Keyword: 일반건물

Search Result 647, Processing Time 0.035 seconds

Evaluation of Weighted Correlator for Multipath Mitigation in GPS Receiver (GPS수신기의 다중경로 오차 제거를 위한 가중 상관기의 성능평가)

  • Shin, Mi-Young;Jang, Han-Jin;Suh, Sang-Hyun;Park, Chan-Sik;Hwang, Dong-Hwan;Lee, Sang-Jeong
    • Journal of Navigation and Port Research
    • /
    • v.31 no.5 s.121
    • /
    • pp.409-414
    • /
    • 2007
  • The effect of multipath is especially serious in urban area and sea surface where buildings and water reflect GPS signal. Multipath brings about the performance degradation on many GPS application because the presence of multipath causes the diminution of pseudorange measurement accuracy in turn position accuracy. In this paper, a multipath mitigation named weighted correlation method is implemented on software GPS receiver, in which the asymmetric correlation function is compensated by modifying the late correlation value. Asymmetry compensation is obtained as weighted sum of two correlators which have different early-late chip spaces. This structure is adopted to lessen the computation load lower keeping up performance similar to that. The performance of implemented multipath mitigation technique is evaluated using GPS signal and multipath signal generated by GPS signal generator and software GPS receiver. The test results show that the weighted correlation method gives hefter performance than the standard correlator and the narrow correlator.

Analysis of Location and Site Planning Preference of USFK Residential Housing (주한미군 주거계획을 위한 입지 및 단지계획 선호도 분석)

  • Lee, Heewon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.12
    • /
    • pp.822-827
    • /
    • 2019
  • There is a high demand for off-base dwellings around Camp Humphreys in Pyeongtaek in accordance with the USFK base relocation project, but their residential planning needs to reflect their requirements. On the other hand, no studies that examined their requirements directly have been found. This study examined the requirements of USFK stationed in Camp Humphreys to identify their requirements. In general, residential planning requires a determination of the demand-based location and size, identification of the facility elements required for the site plan, and analysis of detailed architectural planning elements required for the building plan. Among these, preference analysis of the off-base dwelling demand, location, and site planning elements were performed in this study, and the architectural planning elements were left as following studies. The analysis showed that the demand for off-base dwellings is high, rental houses are preferred, and the commuting time is the most important factor in the location. In addition, while enjoying urban convenience, the location of the foothills near nature is preferred, the importance of the orientation is low and living with Koreans is not a problem. In addition, the demands for exercise facilities in the complex are relatively high.

Quality Characteristics of Hot-air Dried Radish (Raphanus sativus L.) Leaves (열풍 건조 무청의 품질특성)

  • Ku, Kyung-Hyung;Lee, Kyung-A;Kim, Young-Lim;Lee, Yong-Whan
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.35 no.6
    • /
    • pp.780-785
    • /
    • 2006
  • The composition analysis of various radish (Rapharnus sativus L.) leaves and the effects of drying condition on the quality characteristics of hot-air dried radish leaves were carried out by a response surface methodology. Independent variables put in drying temperature $(X_1)$ and drying time $(X_2)$, dependent variables put in color, calcium, iron, vitamin, etc. In the proximate composition of radish leaves by varieties, there were no significant differences in the ash, protein, lipid, calcium and iron content of samples, but there were significant differences in the vitamins, chlorophyll and color value of samples. The quality characteristics on dried radish leaves by central composite design, it was significant value on the moisture content, chlorophyll and color value according to drying temperature and drying times. But there were no significant differences in the contents of calcium $(31.41{\sim}35.80\;mg/g,\;dry\;base)$ and iron $(0.21{\sim}0.29\;mg/g\;dry\;base)$. The multiplex regression coefficients analysis were calculated with independent variables $(X_1,\;X_2)$ and dependent variables (moisture, chlorophyll, color value). The calculated coefficient correlations for the each samples were $R^2>0.97$. The effects of drying temperature were greater than drying time in the total chlorophyll content changes of radish leaves. Based on the present study, the optimum drying condition for the lowest color changes and effective reduction of moisture of radish leaves were expected to be $5{\sim}6$ hours at $70^{\circ}C$.

Changes in Days to Drying and Some Chemical Components by Different Drying Methods in Paeoniae radix (건조방법에 따른 작약근 건조 소요일수 및 성분 변화)

  • ;Kwang-He Kang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.41 no.3
    • /
    • pp.362-369
    • /
    • 1996
  • Seven different drying methods were tested in peony roots of Euisung cultivar, harvested in February, in three year's old plant. The roots were selected in length and diameter and half of the samples were removed cork-layers to compare the effects of cork-layer in processing of drying. The 3$0^{\circ}C$ heat drying without cork-layer reduced in days to drying by five days compared to those of the with cork-layers at the same temperature. The 5$0^{\circ}C$ heat drying after cork-layers removed was the most effective in days to drying. In quality of skin color of the 5$0^{\circ}C$ heating was worse to compare with the lower drying temperature. In the drying at room temperature and the heat drying at lower temperature, the paeoniflorin content in drying after cork-layers removed were higher than that of the drying with cork-layers. However, in the boiling water treatment, the paeoniflorin contents in drying after cork-layers removed were lower than those of with cork-layers. In heat drying, paeoniflorin content showed a decreasing tendency to increase of drying temperature. Total sugars in the peony roots showed a decreasing tendency according to the drying temperature increasing, but starch concentration showed a increasing tendency at the same condition. Concentrations of crude protein, crude fiber and crude ash were showed no differences in various drying methods and the materials with or without cork-layers. Relationships between the paeoniflorin and total sugars, and the paeoniflorin and starch were different significantly by the materials of cork-layers removed or not. The 30~4$0^{\circ}C$ heat drying without cork-layers was the most advisable condition for drying in paeoniflorin concentration, days to drying and skin color after drying.

  • PDF

Study on the Productivity of Hanwoo Steers with Self-product Organic Rice Straw (자가 생산 유기볏짚을 이용한 거세한우 생산성 연구)

  • Cho, Won-Mo;Jeon, Byung-Su;Kim, Hyeng-Chul;Yang, Seung-Hak;Kim, Sang-Bum;Lee, Hyun-June;Ki, Kwang-Seok;Yeo, Joon-Mo
    • Korean Journal of Organic Agriculture
    • /
    • v.17 no.3
    • /
    • pp.393-403
    • /
    • 2009
  • This study was conducted to investigate the productivity of Hanwoo steers by feeding self-product organic rice straw and concentrates(conventional, T1 and organic T2). Sixteen Hanwoo steers(8 months on the average) were randomly assigned to two treatment groups. Feeding trail was carried out in 2 treatment(8 heads/ treatment) by Hanwoo steers for 600 days form 8 to 28 months in age. The range of average daily gains of T1 and T2 were 0.76 to 0.77kg in the growing stage, 0.93 to 0.90kg in the first fattening stage, 0.99 to 0.84kg in the middle fattening stage, and 0.59 to 0.64kg in the latter fattening, respectively, and the gains for overall period was higher in T1 than in T2. Concentrates and total digestive nutrients(TDN)(T1) intakes per unit of kg gains were higher than T2 without significant difference. In carcass characteristics, the carcass weight in T1 were higher about 5% than in T2. According to the above results, it may be concluded that dry matter(DM) intakes, crude protein(CP) and TDN contents of feedstuff between treatments was no significant difference. but marbling in T2 score was higher than in T1 about 20%. There were no significant differences rib-eye area, back fat thickness and fat color(p>0.05).

  • PDF

Study on Nutritive Values of Whole Crop Barley Varieties Grown in a Paddy Field (논토양에서 재배한 청보리 품종의 사료가치 비교 연구)

  • Lee, Sang Moo;Kim, Eun Joong
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.33 no.1
    • /
    • pp.30-38
    • /
    • 2013
  • This study was carried out to investigate the growth characteristics, yield, chemical compositions and nutritive yield of whole crop barley varieties harvested in a paddy field. The experimental design was arranged in a randomized block design with three replications. The treatments consisted of five whole crop barley varieties (Yuyeon, Youngyang, Wooho, Dami, Soman). The planting date was on 21 October 2009 and the samples were harvested on 21 May 2010. Dry matter yield was higher in Youngyang and Dami than other varieties (p<0.05). Crude protein, crude fat, crude ash, ADF and TDN were not significantly different. Crude fiber was the highest at Dami (31.4%), and Youngyang (31.4%) exhibited the lowest crude fiber compared to other varieties (p<0.05). NDF was higher in the order of Wooho > Dami > Soman > Yuyeon > Youngyang (p<0.05). Total mineral content was higher in the order of Youngyang > Wooho > Dami > Soman > Yuyeon (p<0.05). The contents of both essential and non-essential amino acids were not different among whole crop barley varieties. Yields of crude protein was the highest in Wooho (p<0.05), and yields of mineral, amino acid, free sugar and TDN were the highest in Youngyang. Based on the results from this study, it can be suggested that Youngyang and Wooho showed to have higher productivity and high nutritive values compared to other varieties.

RF magnetron Sputtering법에 의해 Plasma Etching된 Glass에 증착한 다양한 친수 박막의 특성

  • Lee, Dong-Uk;Baek, Cheol-Heum;Kim, Dong-Yeong;Yang, Jeong-Min;Kim, Hwa-Min;Lee, Jong-Yeong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.133-133
    • /
    • 2012
  • 일반적으로 TiO2는 광촉매 작용으로 표면 살균성을 가지며, 친수특성으로 인한 자가세정 능력도 가지고 있다. 또한 지구상에 많이 존재하는 광물로 원료의 가격이 저렴하다는 장점이 있어 산업 전반에 사용되고 있다. 하지만 외부의 환경적 오염으로 인한 광촉매 반응 면적의 감소에 따라 반응효율이 저하되는 단점이 있으며, SiO2는 투명한 유리와 같이 비정질상태가 안정하고 높은 굴절률을 가지며 내구성이 외부환경에 강해 무반사 코팅이나 금속박막의 보호층으로 주로 사용된다. WO3는 높은 굴절률과 가시광선 영역에서의 우수한 투과율을 가지고 있으나 conduction band에서 생성된 광캐리어들이 빠르게 재결합 하여 광분해 효율이 좋지 않기 때문에 흔히 쓰이지 않고 있다. 이러한 박막들의 단점을 보완하기 위해 물리적 구조를 변화시켜 반응 면적을 극대화하기 위해 버퍼층이나 다층박막을 사용하는 등 다양한 연구가 진행되고 있다. 본 실험에서는 Slide glass에 Plasma etching 하였을때 친수성이 나타나는 특성을 이용하여 대면적 코팅과 표면 경도를 우수하게 만들 수 있는 RF Magnetron sputtering법으로 Slide glass에 Ar Gas 분위기에서 각 파워별 Plasma etching한 후 TiO2, SiO2, WO3 박막을 증착하여 광학적, 구조적 특성을 분석하였다. 광투과율 측정장치(UV-VIS Spectrophotometer)를 사용하여 투과율을 측정한 결과 모든 박막이 가시광 영역에서 80% 이상의 높은 투과율을 나타내었으며, 접촉각 측정결과 100w로 etching한 glass에 TiO2를 증착한 박막에서 가장 낮은 $3^{\circ}$ 이하의 접촉각을 나타내었다. SEM (Scanning Electron Microscope) 분석을 통해 표면구조를 관찰한 결과 100w로 etching한 후 TiO2를 증착한 박막이 가장 조밀한 구조를 보였으며, AFM (Atomic Force MicroScope) 분석 결과 100w로 etching한 후 TiO2를 증착한 박막의 표면이 가장 거칠어지는 것을 볼 수 있었는데, 이는 물과 닿는 박막의 유효 표면적의 증가로 인하여 광촉매 효과가 증가하였기 때문에 친수성이 향상된 것으로 사료된다. 이러한 박막은 건물 유리벽과 자동차의 내 외장재 전자기기용 광학 필름에 자가세정, 내반사 코팅소재, 디스플레이 표시장치로 활용할 수 있을 것으로 예상된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.

  • PDF

Estimation of Individual Street Trees Using Simulated Airborne LIDAR Data (모의 항공 라이다 자료를 이용한 개별 가로수의 추정)

  • Cho, Du-Young;Kim, Eui-Myoung
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.30 no.3
    • /
    • pp.269-277
    • /
    • 2012
  • Street trees are one of useful urban facilities that reduce carbon dioxide and provide green space in urban areas. They are usually managed by local government, and it is effective to use aerial LIDAR data in order to acquire information such as the location, height and crown width of street tree systematically. In this research, algorithm was proposed that improves the accuracy of extracting top points of street trees and separates the region of individual street trees from aerial LIDAR data. In order to verify the proposed algorithm, a simulated aerial LIDAR data that exactly knows the number, height and crown width of street trees was created. As for the procedure of data processing, filtering that separates ground and non-ground points from LIDAR data was first conducted in order to separate the region of individual street trees. An estimated non-street tree points were then removed from non-ground points, and the top points of street trees were estimated. Region of individual street trees was determined by using the intersecting point of straight line that connects top point and ground point of street tree. Through the experiment by using simulated data, it was possible to refine wrongly estimated points occurred by determining tree tops and to determine the positional information, height, crown width of street trees through the determination of region of street trees.

Comparison of Pure Reinforcement Quantity to Development & Splice Reinforcement Quantity using High-strength Reinforcing Bars (고강도 철근 사용에 따른 순수 철근량에 대한 정착 및 이음 철근량 비교)

  • Cho, Seung-Ho;Na, Seung-Uk;Roh, Young-Sook
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.22 no.1
    • /
    • pp.72-80
    • /
    • 2018
  • Whilst it is common to construct high-rise buildings and long-span structures in the construction and building industry, there might be a number of problems such as excessive re-bars arrangement, deterioration of concrete quality, unnecessary quantity take-off and so forth. As these types of buildings and structures are getting more popular, it is widespread to apply high-strength materials such as high-strength concrete and re-bars to sustain durability and stability. This research aims to investigate the effectiveness of the high-strength reinforcing bars on the underground parking in a rigid-frame structure. In this study, the reinforcing bars with different yield strength were applied to corroborate the usefulness and practicability of the high-strength re-bars on the underground parking in a rigid-frame structure. The test results show that the quantity of reinforcement bars is lowered, as the yield strength of the re-bars are grown in general. However, the quantity of reinforcement bars on the development and splice has a tendency to increase slightly. Despite of the increase of the development and splice, the total quantity of reinforcing bars was reduced since the increasing ration of the pure quantity is higher than the development and splice. Base on the test results, it would be possible to achieve the reduction of reinforcing bars arrangement and lowering the amount of work to be done during a construction phase. Moreover, the reduced amount of bar arrangement will make it possible to improve workability and constructability of reinforced concrete structures. Ultimately, we will be able to attain improved quality and efficiency of construction using reinforced concrete.

Effects of Feeding Browses on Growth and Meat Quality of Korean Native Goats (지엽류 급여가 흑염소의 발육 및 육질에 미치는 영향)

  • Choi, S.H.;Park, B.Y.;Cho, Y.M.;Choi, C.Y.;Kwon, E.G.;Kim, Y.K.;Her, S.N.
    • Journal of Animal Science and Technology
    • /
    • v.45 no.5
    • /
    • pp.819-824
    • /
    • 2003
  • Effects of feeding browses on growth and meat quality of Korean native goats were investigated. Twenty eight heads of male goats were divided into four treatment groups fed diets containing oak browse, pine browse, fermented pine browse, and rice straw. Growth rate, feed intake, carcass and meat quality and blood and serum criteria were investigated. The highest average daily gain of goats was 45.3g from oak browse, and goats on pine browse gained similar to those on fermented pine browse. Daily forage intake was 197g DM for oak browse and 74g DM for fermented pine browse. Feed efficiency(g feed/g gain) of oak browse was 11.0g and that of pine browse was 15.1g. From the results of serological inspection, metabolism in body was normal with all the browses tested. Dressing percentage was 45.1~46.2% and meat percentage was 55.2~55.9% without significant differences between diets. Fat percentage of goat carcasses fed rice straw was higher than those fed pine browse or fermented pine browse which was, however, not significantly different from those on oak browse. Shear force and coking loss of goat meat on pine browse or fermented pine browse was less than those on rice straw(p〈0.05) without significant differences between other browses. Juiciness, tenderness, and flavor of the goat meat were the better(p<0.05) from the pine browse diet than from rice straw.