• Journal of the Korean Geotechnical Society
• /
• v.30 no.9
• /
• pp.41-55
• /
• 2014

In performing seismic analysis of tunnels, it is a common practice to ignore the rock joints and to assume that the rock mass surrounding the tunnel is continuous. The applicability of this assumption has not yet been validated in detail. This study performs a series of pseudo-static discrete element analyses to evaluate the effect of rock joint on the seismic response of tunnels. The parameters considered are joint intersection location, joint spacing, joint stiffness, joint dip, and interface stiffness. The results show that the joint stiffness has the most critical influence on the tunnel response. The tunnel response increases with the spacing, resulting in localized concentration of moment and shear stress. The response of the tunnel is the lowest for joints dipping at $45^{\circ}$. This is because large shear stresses result in rotation of the principal planes by $45^{\circ}$. In summary, the weathered and smooth, vertical or horizontal, and widely spaced joint set will significantly increase the tunnel response under seismic loading. The tunnel linings are shown to be most susceptible to damage due to induced shear stress, and therefore should be checked in the seismic design.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.77-85
• /
• 2014

Recently, the National Emergency Management Agency of Korea has been operating the National Disaster Management System. Nevertheless, there are numerous difficulties in systematic controlling the steep slope DB promptly, because the system's functions in input and control for steep slope information are merely simple. Futhermore, the hazard degrees of steep slope lands nowadays have risen suddenly in accordance with the increase rate of large scale landslides such as the landslide cases of Umyeonmountain, Chuncheon province and others or sever rain storm cases. these lead to rapid increases in frequencies of nature disasters nationally. therefore, it is needed to develop the GIS-based integrated management system for steep slope information in order to manage disasters in advance or high-degree control. This study shows the national GIS-based integrated management system to prevent the disasters that caused by steep slope lands. The integrated management system developed in this study consists of surface information input modules, realtime DB liaison modules of integrated underground information, V-world background map-based GIS, integrated management system for steep slope information user modules, realtime liaison interface modules designed for utilizing steep slope information. Also, tests about stability of data storage, system stability and consistency of processing speed were performed.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.77-87
• /
• 2011

The advent of new platforms each year along with the advancement of technology provides a new opportunity for digital media designers to develop creative and innovative contents. This phenomenon affect the same way the students that major in the digital media, and the use of the platforms that is based on the new technology in the development of contents gives a newer and useful opportunity for learning to the students who recently study the digital media area. As the main technology of the recent digital media that attract many students' attention, we are presenting virtual reality display, movement cognition, physical engine and the gesture interface, and developed the consolidated platform based on these four technologies, and designed them in a way that can be more easily implemented in a simpler way. In order to study the efficiency of the platform with the objective of the development of digital media contents, we have developed four different prototype contents, and have measured based on the user's preference, efficiency and satisfaction. In the results of usability evaluation, functionality, effectiveness, efficiency, satisfaction were rated as 'high'. This results shows that the suggested 3D platform environment provides students to develop a rapid prototype fast and easy, and this may have a positive influence on students major in the digital media to conduct creative development research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.717-724
• /
• 2017

To improve the running safety of a tram operating on a concrete embedded track, a bogie, the core system of the tram, was developed and fabricated. After it was integrated with the prototype car body, a short distance track with a sharp curve and steep gradient was constructed for the test operation. A formula to check the interference of the wheel flange with the track during running was proposed. Based on the results provided by the formula, the track was designed. Another simple formula was derived to estimate the derailment quotient and the wheel unloading ratio. During running on the track, the acceleration of the car body was measured and the interface status between the wheel and the track was monitored by a video system. According to the results calculated by these simple formulas, the derailment quotient and wheel unloading ratio were estimated to be within the safety criteria. In the actual test, no derailment occurred and the measured acceleration satisfied the criteria. Also, there was no interference between the wheel and track. The video monitoring results showed no signs of derailment, such as the climbing of the wheel. The pinion in the center showed good running safety, contacting smoothly with the rack. The measurements of environmental noise proved that the criteria were satisfied.

• Journal of Korea Multimedia Society
• /
• v.11 no.9
• /
• pp.1204-1212
• /
• 2008

The vehicle simulation (flight simulator) in 1920's was the first in the virtual reality. With the development of precise optical and electromagnetic equipment, the virtual reality widened its application for other purposes than military one. Based on the realistic display technology, it is more and more common in the various areas such as entertainment, medical profession, learning, film, architectural design, tourism and etc. In 1989, Jaron Ranier was the first to use the terminology 'Virtual Reality'. With this term, all virtual projects could be classified in a single item. But even before the term was used, the virtual reality has been studied up to now. As a part of virtual reality, the human thirst for the impossible thing has led to the development of ride film. The ride film consists of the special technical elements as well as the psychological analysis of human being. The ultimate purpose of virtual reality is engrossment through interaction. Even though the real interaction requires interface, input sensor and reaction ability, the ride film is not an element of the typical interaction. The virtual reality is mostly defined in technical terms now. But in this study, we will analyze the concepts worked out by Professor Michael Haim who is called a philosopher in the cyberspace in aspect of experience-oriented definition. We will analyze the adaptability of virtual reality based on his concepts such as artificial reality/ interaction/ engrossment/ networked world/ remote display/ simulation/ onmon engrossment. And also, we aim to suggest the directions of developing the ride films for perfect engrossment and to draw optimized conclusion thereon. In this viewpoint, we consider that the study of ride film on which there were few case studies will contribute to level up the basic frameworks of IT technology and the digital image.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.101-112
• /
• 2015

In the 1950s, the concept of configuration management (CM) was started by the US Department of Defense (DOD). Later, it has begun to be applied in aerospace, software, engineering, construction, and nuclear power industry. However, configuration management (CM) in the Korean nuclear industry was firstly utilized in 2006 only for selected parts of facilities, while the US nuclear industry has applied CM for the facilities' entire systems since 1990s. Furthermore, configuration management (CM) is in its conceptual stage in the Korean nuclear industry because of ambiguous CM concepts, lacks of CM professional manpower, non-computerization, and inadequacy of CM procedures and processes. In order to address this issues, seven industries (including defense, aerospace, software, engineering, architecture, civil engineering, nuclear power) that utilize the concept of configuration management (CM) were compared and analyzed based on the CM purpose, technique, and life-cycle perspectives. By an extensive literature review and expert interviews, this paper developed a framework of configuration management (CM) for the nuclear industry. And also, a list of functions based on life-cycle stages and CM techniques are developed for clarifying CM framework in order to promote practical applications.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1145-1156
• /
• 2002

We propose a web document transcoding technique that translates existing web pages designed for desktop computers into an appropriate form for hand-held devices connected to the wireless internet. By defining a content block based on a visual separation and using it as a minimum unit for analyzing and converting processes, we can get web pages converted more exactly. We also apply the reallocation of the content block and the generation of new index in order to provide convenient interface without left-right scrolling in small screen devices. These methods, compared with existing ways such as text level summary or partial extraction method, can provide efficient navigation and a full recognition of web documents. To gain those transcoding benefits, we propose the Layout-Forming Tag Analysis Algorithm that analyzes structural tags, which motivate visual separation and the Component Grouping Algorithm that extracts the content block. We also classify and rearrange the content block and generate the new index to produce an appropriate form of web pages for small display devices. We have designed and implemented our transcoding system in a proxy server and evaluated the methods and the algorithms through an analysis of transcoded results. Our transcoding system showed a good result on most of popular web pages that have complicated structures.

• Archives of design research
• /
• v.13 no.1
• /
• pp.121-130
• /
• 2000

This study can be expressed by gathered and formed into the exhibition space's structure practical progress/ application. For the one model of fascinating exhibition's space thru inter-space's pertinent adjustment, production between spactator and exhibition constituent on an exhibition story-line, I adjusted the focus to follow mentioned methods systematically for the example; An exhibition space is completed to be very impressive and attractive space by proper adjustment and production of M-M/C interface in exhibition storyline. Quantity space is transfered into quality space through the transmission of an exhibition which can be define as the point of an exhibition structure. And also could de transferd into a bodily sensation space that inherent full of interactive constituent. Changeable exhibition constituents (exhibition item and text) that sporadically expatiated (not trimed, the original form) in the process of an exhibition structure draw much higer quality of the optimal solution in optimize process which is given when aggregate again to contextual flow of synthetic exhibition scenario. Reconstruction of individual exhibition constituents to the new story, that is, transference of exhibition text to exhibition context is inspirit to an exhibition by maximize the exhibition effect in connection can be systematized through carrying out an outcentripetalpart. However, since pattern of an exhibition structure that consequtively meet variety spacetime of an exhibittion environmental can't be exist, this study presents centralizing the exhibition plan of Korea communication pavilion of the annual Expo Comm Wireress Korea, sustained process from design proposal, research and analysis to synthesis, development, transmission and management to an example of an applying crystallization.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.91-100
• /
• 2014

This study was to examine how visual angle of matrix corresponding to the physical properties of P300 speller and eye gaze corresponding to the user's personal characteristics influence on the accuracy of P300. Visual angle of the matrix was operated as the distance between the user and the matrix and three groups were composed: 60 cm group, 100 cm groups, and 150 cm group. Eye gaze methods was consisted three conditions. Head moving condition was putting eye gaze using head, pupil moving condition was moving pupil with the head fixed, while the eye fixed condition is to fix the eye gaze at the center of the matrix. The results showed that there was significant difference in the accuracy of P300 speller according to the eye gaze method. The accuracy of the head moving condition was higher than the accuracy of pupil moving conditions, accuracy of pupil moving conditions was higher than the accuracy of the eye fixed conditions. However, the effect of visual angle of matrix and interaction effect were not significant. When P300 amplitude of target character was measured depending on how you stare at the target character, P300 amplitude of the head moving condition was greater than P300 amplitude of the pupil moving condition. There was no significant difference in the error distribution in head moving condition and pupil moving condition, while there was a significant difference between two eye gaze conditions and fixed gaze condition. The error was located at the neighboring characters of the target character in head moving condition and pupil moving condition, while the error was relatively distributed widely in fixed eye condition, error was occurred with high rate in characters far away from the center of matrix.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.369-376
• /
• 2016

Positron Emission Tomography(PET) is nuclear medical tests which is a combination of several compounds with a radioactive isotope that can be injected into body to quantitatively measure the metabolic rate (in the body). Especially, Phenomena that increase (sing) glucose metabolism in cancer tissue using the $^{18}F$-FDG (Fluorodeoxyglucose) is utilized widely in cancer diagnosis. And then, Numerous studies have been reported that incidence seems high availability even in the modern diagnosis of dementia and Parkinson's (disease) in brain disease. When using a dynamic PET iamge including the time information in the static information that is provided for the diagnosis many can increase the accuracy of diagnosis. For this reason, clinical researchers getting great attention but, it is the lack of tools to conduct research. And, it interfered complex mathematical algorithm and programming skills for activation of research. In this study, in order to easy to use and enable research dPET, we developed the software based graphic user interface(GUI). In the future, by many clinical researcher using DIA-Tool is expected to be of great help to dPET research.